The SCIEX clinical diagnostic portfolio is For In Vitro Diagnostic Use. Rx Only. Product(s) not available in all countries. For information on availability, please contact your local sales representative or refer to https://sciex.com/diagnostics. All other products are For Research Use Only. Not for use in Diagnostic Procedures.
Trademarks and/or registered trademarks mentioned herein are the property of AB Sciex Pte. Ltd. or their respective owners in the United States and/or certain other countries.
© 2020 DH Tech. Dev. Pte. Ltd.
Therapeutic protein glycosylation is an important post-translational modification that can affect protein function, clearance, and stability. Variations in glycosylation have been implicated in the regulation of immune responses like antibody dependent cellular cytotoxicity (ADCC) and complement dependent cytotoxicity (CDC).
Due to the microheterogeneity of therapeutic proteins, an analytical method capable of resolving a large number of these glycan species is needed to quickly and confidently enable their identification. Using a fluorophore derivatization strategy, glycans can be provided charge and fluorescent properties enabling separation and detection by CE. SCIEX offers standard glycan analysis technology as well as a new high-speed methodology.
The PA 800 Plus Pharmaceutical Analysis System enables you to analyze the most important N-linked oligosaccharides in as little as 3 minutes. When combined with the NEW fast N-glycan sample preparation protocol, data can be obtained from a sample in just four hours.
Key benefits to carbohydrate profiling using capillary electrophoresis include:
Using a novel sample preparation protocol in which magnetic bead technology is utilized for clean-up, N-linked oligosaccharide sample preparation and workflow takes less than four hours to complete. The resulting benefit of this sample prep is the omission of centrifugation and/or vacuum centrifugation steps, allowing compatibility with fully automated liquid handling systems like Beckman Coulter’s Biomek platform. Additionally, this approach includes unbiased glycan labeling and electrokinetic sample injection for unambiguous detection of highly sialylated carbohydrates that otherwise may co-migrate with excess APTS dye.
Standard Method: Oligosaccharide Analysis Simplified
The PA 800 Plus Carbohydrate Labeling and Analysis Assay contain reagents, buffers, and separation capillaries for the analysis of N-linked oligosaccharides. These characteristics are required for labeling, separation and quantification of oligosaccharides released from glycoproteins. Following release (enzymatic or chemical), glycans are labeled with 1-amino 3, 6, 8 - pyrene trisulfonic acid (APTS) at the reducing terminus using a reductive amination reaction. The stoichiometry of labeling is such that only one APTS molecule is attached to each glycan. The highly charged and fluorescent oligosaccharides can then be easily resolved in an electric field and detected by laser-induced fluorescence. APTS derivatized glycans moving past the laser induced fluorescence detector yield an equal detector response so relative quantities can be directly compared. Oligosaccharide populations associated with a protein yield a fingerprint that can be used for protein identification or interpretation of quality or function. The PA 800 Plus provides an easy, quantitative and robust determination of protein micro-heterogeneity with a typical analysis time of fewer than 15 minutes.
Carbohydrate Labeling and Analysis Include:
System and Chemistry Features:
Incorporation of separation buffer modifications enables increased separation of co-migrating species thus enhancing the assay's identification and quantitation capability. In the figure above, up to eighteen different glycans were resolved from one another using this optimized carbohydrate separation method.
Analysis of Ribonuclease B high mannose glycoforms
Separation of the 1-aminopyrene-3, 6, 8-trisulfonate-labeled high mannose type oligosaccharides released from bovine ribonuclease B and the individual standard structures. Capillary: 50 cm (to detector) x 50 um eCAP NCHO coated capillary. Buffer: 25 mM acetate (pH 4.75) with 0.4% polyethylene oxide. Field Strength: 500 V/cm; Temperature 20 °C; Detection: Laser-induced fluorescence (excitation at 488 nm, emission at 520 nm).
The analysis of monosaccharide composition can provide valuable information during the initial characterization of a glycoprotein. A clear advantage of our CE-based approach is in the specificity of the assay. The reductive amination and open-tube format allow this analysis to be performed directly from the glycoprotein hydrolysate--no need for post hydrolysis cleanup. With LIF and APTS derivatization, each sugar yields the same detector response, such that their relative quantities can be directly compared.
CE separation of (A) the mild acid hydrolysis product of fetuin after aldolase treatment. (B) The strong acid hydrolysis product after reacetylation and (C) monosaccharide standards. Capillary: 27 cm x 25 um bare fused silica; Buffer: 240 mM borate (pH 9.0); Field Strength: 740 Volts/cm; Injection: 0.5 psi for 5; Detection: Laser-induced fluorescence (excitation at 488 nm, emission at 520 nm).
The solution-based approach of CE allows one to easily create an environment to assess differences in a protein's glycosylation state--directly from the protein. Through the addition of salts like borate, complexes which amplify the charge state of the glycovariants can be formed. This is the simplest approach to assessing the heterogeneity of a glycoprotein.
*Formerly Beckman Coulter CE
A new password has been sent to your email.
You have added a user.
This serial number could not be found. Would you like to submit the case anyway?
Your password has been updated.
Your account is now created.
A verification link has been sent to your email.
A new password has been sent to your email.
Your insturment has been removed.
Your privacy settings are now updated.
Software has already been registered to another instrument. Please check your AID and try again.
If you want to change the License Key to another instrument, please submit a new case.
Software has already been registered to the instrument selected.
Please check your instrument's software by going to the Instruments page and selecting the instrument in your "My Instruments" section. Here you will see a Software tab where you can view your instrument's software information.
You can also go to the Registered Software page to view software associated with your instrument(s).
If you are not finding what you are looking for, please submit a new case.