Knowledge Base is your tool to finding answers about common questions. Browse all Knowledge Base articles below.
- Korean (South Korea)
- Support
- Knowledge Base Articles
Knowledge Base Article
최근 기사
04/18/2024 How to calibrate MS3 in negative mode in Analyst® software
04/10/2024 Why SCIEX OS does not create a .wiff file with certain configuration of acquisition mode ?
03/15/2024 Adjust the regional language in LibraryView™ software to correct the SCIEX L:icense Notification screen
03/15/2024 How can I change an audit map's settings in Analyst® software?
03/15/2024 MultiQuant™ MD software error: Missing active project folder
|
Maintaining the Ion Spray Voltage when Using the Nano OptiFlow® Turbo V Ion Source In order to maintain the ion spray voltage while operating the nano OptiFlow® Turbo V ion source, one option is to leave the mass spectrometer in Standby mode (LC pumps are turned off and some instrument voltages are turned off) at the end of a run.
09/01/2023
Academia Omics
|
Pharma CRO
|
NanoLC 400
|
|
Can Xcalibur Software 3.x and Eksigent Software 4.3 Operate on Windows 10? SCIEX's Eksigent software and Thermo Scientific's Xcalibur software have not officially been tested together on a Windows 10 operating system. The Eksignet software can be installed on a Windows 10 PC, but then it cannot be configured with any Xcalibur software versions. However, both software types can be configured together on a system running Windows 7, 64-bit.
03/20/2020
Academia Omics
|
NanoLC 400
|
|
Keeping a Nano LC/MS System Running after Sample Acquisition Is Completed To keep a nano LC/MS system running after sample acquisition has completed, the LC/MS can be configured two different ways, assuming the Nano Eksigent 400 system is used.
10/08/2018
Academia Omics
|
Pharma CRO
|
Micro LC 200+
|
Nano cHiPLC
|
NanoLC 400
|
|
Where Can I Find a Column Part Number from Eksigent? The provided link lists all micro and nano columns including nano chip columns.
12/01/2017
Academia Omics
|
Environmental Industrial
|
Forensics
|
Pharma CRO
|
Micro HPLC Columns
|
cHiPLC
|
Micro cHiPLC
|
Nano cHiPLC
|
NanoLC 400
|
|
Can the Eksigent Nano III ion source fittings withstand the back pressure when using a UPLC Can the Eksigent Nano III ion source fittings withstand the back pressure when using a UPLC
10/07/2016
Academia Omics
|
NanoLC 400
|
|
Ekspert™ 400 LC system – Change the mobile phase How to change mobile phase on Ekspert™ 400 LC system
10/07/2016
Academia Omics
|
Pharma CRO
|
NanoLC 400
|
|
Late elution of peaks on Eksigent nano Tempo Classic Late elution of peaks on Eksigent nano Tempo Classic
10/07/2016
Academia Omics
|
NanoLC 400
|
|
Ekspert 400 AS3 Error Message ERROR SAMPLE-NEEDLE VIALBOTTOM ACTIVATED Ekspert 400 AS3 Error Message ERROR SAMPLE-NEEDLE VIALBOTTOM ACTIVATED
09/04/2016
Academia Omics
|
NanoLC 400
|
|
Can I use the Eksigent 3.12.1 software on a Win7 64 bit PC Instructions on how to configure Windows 7 for use with the Eksigent 3.12.1 software.
07/08/2016
Academia Omics
|
NanoLC 400
|
Contact Support