AB Sciex is doing business as SCIEX. © 2010-2019 AB Sciex. The trademarks mentioned herein are the property of the AB Sciex Pte. Ltd. or their respective owners. AB SCIEX™ is being used under license. Beckman Coulter® is being used under license. Product(s) may not be available in all countries. For information on availability, please contact your local representative. For research use only. Not for use in diagnostic procedures.

Knowledge Base Articles

Knowledge Base is your tool to finding answers about common questions. Browse all Knowledge Base articles below.

Recent Articles

4/23/2019 Using the Purity Score To Assess a Match to My Library Search Results in SCIEX OS Software
4/19/2019 Replacing the Logo Shown in My Report in SCIEX OS Software
4/19/2019 Why Don't I get Hits when the Precursor Mass Tolerance Is Set to 0.01 Da when Searching SCIEX Libraries?
4/17/2019 What Paramters Can Be Modified in the Non-targeted Peaks Search Algorithm in SCIEX OS Software?
4/5/2019 User Role Not Assigned Correctly in SCIEX OS Software
View:
All Articles My Articles Premium Access
Filter Results

Filter Results

Capillary Electrophoresis Instruments

HPLC Products

Ion Mobility Spectrometry

Mass Spectrometers

Software

Standards and Reagents

Using the Purity Score To Assess a Match to My Library Search Results in SCIEX OS Software

All peaks from both the unknown and library spectra are used to calculate the Purity Score, which is used to assess how well a compound matches an existing library compound. A high value indicates a high probability that the unknown spectrum has been correctly identified; a low value indicates the match is less certain.

4/23/2019    SCIEX OS Software

Replacing the Logo Shown in My Report in SCIEX OS Software

To replace the logo shown in a report in SCIEX OS software after the results table is reviewed, click Reporting, then Create Report, and then save the Results Table. Click Replace Logo.

4/19/2019    SCIEX OS Software

Why Don't I get Hits when the Precursor Mass Tolerance Is Set to 0.01 Da when Searching SCIEX Libraries?

Searches of SCIEX libraries with the precursor mass tolerance set to 0.01 Da may not yield any hits. This is due to the fact that some of SCIEX libraries contain spectra that were acquired with inaccurate precursor m/z.

4/19/2019    SCIEX OS Software

What Paramters Can Be Modified in the Non-targeted Peaks Search Algorithm in SCIEX OS Software?

Premium Access

This Knowledge Base article is only available if you are logged in to your account, and you have a registered instrument under warranty or with an active software support plan. Please log in to your account.

4/17/2019    SCIEX OS Software

User Role Not Assigned Correctly in SCIEX OS Software

To resolve the error "You do not have the correct SCIEX OS role permissions to access this product" in SCIEX OS software, the software needs to be opened under the Windows user login that the software was installed under.

4/5/2019    SCIEX OS Software

Installing the SCIEX OS Software CFR License

Save the CFR license file to the C:\ Program Files\Sciex\Sciex OS folder where the SCIEX OS license is located.

4/5/2019    SCIEX OS Software

Explanation of 32 Karat License Key Program and User License Types

32 Karat software requires a hardware license key to launch, and on older versions, a similar software license key is installed from a floppy disk.

4/2/2019    CESI 8000 High Performance Separation-ESI Module | P/ACE MDQ | PA 800 plus Pharmaceutical Analysis System

Overview of the 32 Karat Software User Privileges

An overview is provided of each user privilege in the 32 Karat software that can be assigned or removed from the user.

4/2/2019    PA 800 plus Pharmaceutical Analysis System

How Does the Formula Finder Algorithm Work in Sciex OS Software?

The Formula Finder algorithm in SCIEX OS software tries to predict the possible chemical formula based on the MS and MS/MS spectrum using the precursor ion's mass accuracy, isotopic pattern and MS/MS fragmentation pattern.

4/2/2019    SCIEX OS Software

What Causes BioPharmaView™ Software To Stall when Processing Data or Running Batches?

BiopharmaView™ software will stall when processing data when more than one instance of the software is open or if there are some corrupted files in the processing queue folder in the BioPharmaView program files folder.

3/21/2019    BioPharmaView Software
We use cookies and by using this site or closing this message, you agree to our privacy policy.
Accept Cookies
×

AB Sciex is doing business as SCIEX. © 2010-2019 AB Sciex. The trademarks mentioned herein are the property of the AB Sciex Pte. Ltd. or their respective owners. AB SCIEX™ is being used under license. Beckman Coulter® is being used under license. Product(s) may not be available in all countries. For information on availability, please contact your local representative. For research use only. Not for use in diagnostic procedures.