Course Catalog

1 Day Introduction to LC Maintenance at Customer Site View Course

Duration: 1 day
Language: Chinese,English
Type: at Customer
Course Level: Intermediate

This training course provides a variety of hands-on LC-MS Maintenance with a focus on your LC system. You will learn how to recognize LC issues on your LC-MS system, recommended maintenance, and how to exchange various consumable parts to keep your system running properly. It is intended for those who have completed a Success Program or have some operational experience with SCIEX LC-MS systems.

Currently offered for the following Instruments:

LC Systems: SCIEX ExionLC, Shimadzu (LC-20AD, LC-20ADXR, LC-20AT, LC-30AD), and Agilent (1260, 1260 Infinity II, 1290, 1290 Infinity II)

The course includes the following:

1 day of instructor led training at the customer site by an experienced Service trainer.
Hands-On for 1 Primary Learner
Access to SCIEX Now Learning Hub self-paced eLearning, lectures, demonstrations as well as SCIEX Now online Support tools available for up to 3 Learners.
Complimentary follow-up WebEx session with an Applications Support Scientist to ensure your success.
Valid for 12 months from date of purchase.

To complete this course and earn a certificate, you must complete a final exam at the end of the course. All content required for the exam is covered during the 1 day of training. No additional preparation time should be required.

Upon payment for the course, you will be enrolled in the Introduction to LC Maintenance Learning Path on SCIEX Now Learning Hub.

1 Day Introduction to MS Maintenance at Customer Site View Course

Duration: 1 day
Language: Chinese,English
Type: at Customer
Course Level: Intermediate

This training course provides a variety of hands-on LC-MS Maintenance with a focus on your MS system. You will learn how to recognize MS related issues on your LCMS system, recommended maintenance, and how to exchange various consumable parts to keep your system running properly. It is intended for those who have completed a Success Program or have some operational experience with SCIEX LC-MS systems

Currently offered for the following Instruments:

MS Instruments: All versions of SCIEX Triple Quad and QTRAP LC-MS systems (RUO), all versions of TripleTOF and all versions of X500 series.

The course includes the following:

1 day of instructor led training at the customer site by an experienced Service trainer.
Hands-On for 1 Primary Learner
Access to SCIEX Now Learning Hub Self-paced eLearning, lectures, demonstrations as well as SCIEX Now online Support tools available for up to 3 Learners.
Complimentary follow-up WebEx session with an Applications Support Scientist to ensure your success.
Valid for 12 months from date of purchase.

To complete this course and earn a certificate, you must complete a final exam at the end of the course. All content required for the exam is covered during the 1 day of training. No additional preparation time should be required.
Upon payment for the course, you will be enrolled in the Introduction to MS Maintenance Learning Path on SCIEX Now Learning Hub.

1 Day Personalized Application Support at Customer Site View Course

Duration: 1 day
Language: English
Type: at Customer
Course Level: Advanced,Intermediate

Personalized training and support from our application scientists can help you save time on application development and implementation as well as give your users confidence in troubleshooting and maintenance. An applications scientist, who is an expert in your field, will contact you ahead of time to discuss training goals and to tailor a visit focused on your specific needs. We recommend a minimum of 2 days for better results

Your personalized application support visit includes the following:

1 Day personalized application support provided at the customer site by an Applications Scientist
Hands-on for 1 Primary Learner and up to 3 total learners for lecture and demonstration
Valid for 12 months from date of purchase

1 Day Personalized Application Support at SCIEX Location View Course

Duration: 1 day
Language: English
Type: at SCIEX
Course Level: Advanced,Intermediate

Intermediate to Advanced Customized Training is delivered by an Application Scientist and is flexible to customer requirements. The training is for one participant at an SCIEX location (does not include travel and living expenses) and is valid for 12 months from the date of purchase. Courses in various systems and applications. See latest detailed information online: http://sciex.com/education

1 Day Transition to SCIEX OS for SCIEX Triple Quad and QTRAP Systems at Customer Site View Course

Duration: 1 day
Language: English
Type: at Customer
Course Level: Advanced

This training course is a unique blend of instructor-led training, hands-on laboratory exercises and self-paced eLearning provided at the Customer Site. It follows the proven spaced learning approach to maximize learning retention. This course is intended for those who are experienced with the operation of SCIEX LC-MS/MS systems. This program is currently offered on all SCIEX Triple Quad and QTRAP systems that support acquisition using SCIEX OS. Upon completion of the course, you should be comfortable with creating and optimizing SCIEX OS acquisition methods, performing data acquisition and quantitative data processing, and maintaining and troubleshooting your system.

This course includes the following:

1 day of instructor-led and hands-on training provided at the customer site by an experienced Applications Support Scientist
Complimentary follow-up WebEx session with an Applications Support Scientist
Related self-paced eLearning courses, reference material and lab exercises
Workflow certificate upon successful completion of final exam
Access to SCIEX Now Learning Hub database of >100 eLearning as well as SCIEX Now online for all your support needs.
We recommend Hands-On focus for 1 Primary Learner and up to 3 Learners total for demonstration and content.
Valid for 12 months from date of purchase.

To complete this course and earn a certificate, you must complete a final exam at the end of the course. All content required for the exam is covered during the 1 day of training. No additional preparation time should be required.
Upon payment for the course, you will be enrolled in the Transition to SCIEX OS for SCIEX Triple Quad and QTRAP Systems Learning Path on SCIEX Now Learning Hub.

2 Day Advanced LC-MS Method Development Training at Customer Site View Course

Duration: 2 days
Language: Chinese,English
Type: at Customer
Course Level: Advanced

This training course is intended to bring your knowledge and skill of Method Development to the next level. The knowledge learned can help you save time when faced with new compounds that do not work well with your existing methods or fully optimize your existing methods for the highest sensitivity. It provides instructor led training and a variety of hands-on laboratory exercises. It is intended for those who have completed a Success Program, or have significant operational experience with SCIEX LC-MS systems. Upon completing the course, you should be comfortable with optimizing compounds and source method parameters in both ESI and APCI modes. You will learn advanced MS method parameters such as Scheduled MRM Pro and best practices for developing a LC methods including column and buffer selection.

Currently offered for the following Instruments and workflows:

LC Systems: SCIEX ExionLC and Jasper LCs as well as Shimadzu (LC-20AD, LC-20ADXR, LC-20AT, LC-30AD) and Agilent (1260, 1260 Infinity II, 1290, 1290 Infinity II)
MS Instruments: All versions of SCIEX Triple Quad and QTRAP LC-MS systems (RUO and MD versions).
Workflows: Quantitation of small molecules in Clinical Diagnostics, Clinical Research, Forensics, Food or Environmental testing.

The course includes the following:

2 days of instructor led training at the customer site by an Applications Support Scientist
Hands-On for 1 Primary Learner
Workflow certificate upon successful completion of final exam
Access to SCIEX Now Learning Hub self-paced eLearning, lectures, demonstrations as well as SCIEX Now online Support tools available for up to 3 Learners.
Complimentary follow-up WebEx session with an Applications Support Scientist to ensure your success.
Valid for 12 months from date of purchase.

To complete this course and earn a certificate, you must complete a final exam at the end of the course. All content required for the exam is covered during the 2 days of training. No additional preparation time should be required.
Upon payment for the course, you will be enrolled in the Advanced LC-MS Method Development Training Learning Path on SCIEX Now Learning Hub.

2 Day Advanced LC-MS Quantitation Troubleshooting at Customer Site View Course

Duration: 2 days
Language: Chinese,English
Type: at Customer
Course Level: Advanced

This training course provides a variety of hands-on troubleshooting exercises, best practices and finishes with a Troubleshooting Challenge for the Learner. It is intended for those who have completed a Success Program or have significant operational experience with SCIEX LC-MS systems.

Currently offered for the following Instruments and workflows:

LC Systems: All SCIEX ExionLC, Shimadzu (LC-20AD, LC-20ADXR, LC-20AT, LC-30AD) and Agilent (1260, 1260 Infinity II, 1290, 1290 Infinity II)
MS Instruments: All versions of SCIEX Triple Quad and QTRAP LC-MS systems (RUO and MD versions).
Workflows: Quantitation of small molecules in Clinical Diagnostics, Clinical Research, Forensics, Food or Environmental testing.

The course includes the following:

2 days of instructor led training at the customer site by an Applications Support Scientist
Hands-On for 1 Primary Learner
Access to SCIEX Now Learning Hub Self-paced eLearning, lectures, demonstrations as well as SCIEX Now online Support tools available for up to 3 Learners.
Complimentary follow-up WebEx session with an Applications Support Scientist to ensure your success.
Valid for 12 months from date of purchase.

To complete this course and earn a certificate, you must complete a final exam at the end of the course. All content required for the exam is covered during the 2 days of training. No additional preparation time should be required.
Upon payment for the course, you will be enrolled in the Advanced LC-MS Quantitation Troubleshooting Learning Path on SCIEX Now Learning Hub.

2 Day Introduction to QTRAP at SCIEX Location View Course

Duration: 3 days
Language: German,English
Type: at SCIEX
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This training course is intended for beginner to intermediate level users of the QTRAP System for running small molecule applications. QTRAP theory will be introduced and participants will learn QTRAP System features and software to build methods for quantitative and qualitative analysis, with a focus on qualitative workflows. The course is divided between classroom based lectures providing LC/MS/MS theory and hands-on laboratory exercises designed to reinforce lecture fundamentals. Emphasis is placed on advanced scheduled MRM quantitation features, QTRAP scan functions and Information-Dependent Acquisition (IDA) method development. It is delivered at a SCIEX location by an experienced SCIEX instructor. Upon completing the course, you should have a clear understanding of LC-MS/MS and linear ion trap (LIT) theory as it relates to operating your QTRAP in an Information Dependent Acquisition (IDA) manner for compound identification, and you will be capable of transferring the principles and practices learned throughout the course and apply them to your specific workflows.

It supports the following systems:
MS Instruments: All SCIEX QTRAP LC-MS systems (RUO and MD versions).
The instrument model used during training may be different from your instrument model, but procedures will be the same or similar and will include content relevant for all.

Prerequisites: One year of practical experience operating a SCIEX system or participation in a Success Program are course pre-requisites.

The course includes the following:

2 days of instructor led training at a SCIEX location by an Instructor with Applications expertise
Tuition for 1 Primary Learner to participate (does not include travel and living expenses)
Workflow certificate upon successful completion of final exam
Access to SCIEX Now Learning Hub Self-paced eLearning, lectures, demonstrations as well as SCIEX Now online Support tools
Valid for 12 months from date of purchase

To complete this course and earn a certificate, you must complete a final exam at the end of the course. All content required for the exam is covered during the 2 days of training. No additional preparation time should be required.
Upon payment for the course, you will be enrolled in the Introduction to QTRAP at SCIEX Location Learning Path on SCIEX Now Learning Hub.

CANCELLATION or RESCHEDULING POLICY

For cancellation/rescheduling, please contact us at least 2 weeks prior to the start of class.
We reserve the right to cancel a class until 3 weeks prior to the start date of the training class. If the class is cancelled, we will assist you in rescheduling.

TRAINING LOCATION ADDRESS

500 Old Connecticut Path, Framingham, MA 01701
1201 Radio Road, Redwood City, CA 94065
Landwehrstraße 54, 64293 Darmstadt, Germany

2 Day LC-MS Method Validation at SCIEX Location View Course

Duration: 2 days
Language: English
Type: at SCIEX, Instructor Led Virtual
Course Level: Advanced,Intermediate

This training program is intended for intermediate to advanced learners who have completed a Success Program, or have significant operational experience with SCIEX LC-MS/MS systems. It is intended to provide the learner with the knowledge necessary to successfully validate an LC-MS/MS assay on SCIEX systems. The training process includes a blend of instructor-led training, hands-on exercises and self-paced eLearning. Upon completion of the course, you should understand validation principles and parameters, be able to perform sample preparation, review data, and troubleshoot some common issues encountered during method validation.

Prerequisites: One year of practical experience operating a SCIEX system or participation in a Success Program are course pre-requisites.

The course includes the following:

2 days of instructor-led and hands-on training delivered by an experienced Applications Support Scientist
Related self-paced eLearning courses, reference material and lab exercises
Workflow certificate upon successful completion of a final exam and permanent access to all course materials for reference
Access to SCIEX Now Learning Hub database of >100 eLearning courses as well as SCIEX Now online for all your support needs
Valid for 12 months from date of purchase.

To complete this course and earn a workflow certificate, you must complete a final exam at the end of the course. All content required for the exam is covered during the 2 days of training. No additional preparation time should be required.
Upon payment for the course, you will be enrolled in the LC-MS Method Validation at SCIEX Learning Path on SCIEX Now Learning Hub.

CANCELLATION or RESCHEDULING POLICY

For cancellation/rescheduling, please contact us at least 2 weeks prior to the start of class.
We reserve the right to cancel a class until 3 weeks prior to the start date of the training class. If the class is cancelled, we will assist you in rescheduling.

2 Day SCIEX Labs vMethod Implementation Training at Customer Site View Course

Duration: 2 days
Language: Chinese,English
Type: at Customer
Course Level: Intermediate

This SCIEX University Application Training is intended to seamlessly implement a vMethod purchased from SCIEX. It ensures a solid groundwork for robustness, throughput and quality data generation. This course is intended to provide an experienced user with the knowledge necessary to successfully implement a SCIEX vMethod and execute analyses from sample preparation to data processing. Upon completion of the course, the student should be comfortable with preparing samples and calibration standards for analysis, setting up the instrument, creating an acquisition batch, running samples and reviewing data. Currently offered for the following Instruments: LC Systems: All SCIEX compatible LC Systems MS Instruments: All versions of SCIEX Triple Quad and QTRAP LC-MS systems (RUO), All versions of TripleTOF and all versions of X500 series. It includes the following: 2 Day of instructor led training at the customer site by an Applications Support Scientist Hands-On for 1 Primary Learner Access to SCIEX University Self-paced eLearning, lectures, demonstrations as well as SCIEX Now online Support tools available for up to 3 Learners. Complimentary follow-up WebEx session with an Applications Support Scientist to ensure your success. Valid for 12 months from date of purchase. See latest course information in the SCIEX University online Catalog: https://sciex.com/support/training

2.5 Day Advanced LC-MS Maintenance and Troubleshooting Training at SCIEX View Course

Duration: 2.5 days
Language: Chinese,English
Type: at SCIEX
Course Level: Advanced
Rating:

★★★★★

★★★★★

This training course is a combination of three customer site courses combined into one for a comprehensive Maintenance and Troubleshooting course at a much lower price. You will learn how to recognize and differentiate between LC and MS issues on your LC-MS system, recommended maintenance, and how to exchange various consumable parts to keep your system running properly. In addition it provides a variety of hands-on troubleshooting exercises, best practices and finishes with a Troubleshooting Challenge for the Learner. It is intended for those who have completed a Success Program or have significant operational experience with SCIEX LC-MS systems. To complete this course and earn a certificate, you must complete a final exam at the end of the course.

Prerequisites: Participation in a Success Program or significant operational experience with SCIEX LC-MS/MS systems are course pre-requisites. You must complete the Front End Cleaning of SCIEX Triple Quadrupole and QTRAP systems eLearning course before attending the course.

It supports the following systems:

LC Systems: SCIEX ExionLC and Shimadzu (LC-20AD, LC-20ADXR, LC-20AT, LC-30AD)
MS Instruments: All SCIEX Triple Quad and QTRAP LC-MS systems (RUO and MD versions).
Workflow focus: Quantitation of small molecules

The instrument model used during training may be different from your instrument model., but the procedures will be same or similar and will include content relevant for all.

The course includes the following:

2.5 days of instructor led training at a SCIEX location by an Instructor with both Service and Applications expertise
Tuition for 1 Primary Learner to participate (does not include travel and living expenses)
Workflow certificate upon successful completion of final exam
Access to SCIEX Now Learning Hub self-paced eLearning, lectures, demonstrations as well as SCIEX Now online Support tools
Valid for 12 months from date of purchase

To complete this course and earn a certificate, you must complete a final exam at the end of the course. All content required for the exam is covered during the 2.5 days of training. No additional preparation time should be required.
Upon payment for the course, you will be enrolled in the Advanced LC-MS Maintenance and Troubleshooting at SCIEX Location Learning Path on SCIEX Now Learning Hub.

CANCELLATION or RESCHEDULING POLICY

For cancellation/rescheduling, please contact us at least 2 weeks prior to the start of class.
We reserve the right to cancel a class until 3 weeks prior to the start date of the training class. If the class is cancelled, we will assist you in rescheduling.

TRAINING LOCATION ADDRESS

500 Old Connecticut Path, Framingham, MA 01701

3 Day Advanced Forensics Training at Partner Site View Course

Duration: 3 days
Language: Chinese
Type: at SCIEX
Course Level: Intermediate

This SCIEX University course is intended to provide experienced LC-MS users with the knowledge necessary to successfully perform LC-MS based method development for Forensic Applications and troubleshoot common MS and HPLC issues. It is delivered at a Partner site by an experienced SCIEX instructor and an industry expert. It is intended for those who have completed a SCIEX University Success Program or have at least one year of operational experience with SCIEX LC-MS systems.

Upon completing the course, you should be comfortable with performing instrument tuning and calibration, optimizing challenging compounds in ESI and APCI mode, understanding how to build a robust LC-MS method, troubleshooting common HPLC and MS issues, understanding quantitation parameters, and identifying issues with the data results. Industry expert(s) will also share best practices and cutting edge knowledge and industry trend(s).

It includes the following:
- 3-Day of instructor led training at the Partner Location by an Applications Scientist and Industry Expert(s)
- Tuition for 1 Primary Learner to participate (does not include travel and living expenses)
- Certification upon successful completion of final exam
- Access to SCIEX University Self-paced eLearning, lectures, demonstrations as well as SCIEX Now online Support tools
- Valid for 12 months from date of purchase.

See latest course information in the SCIEX University online Catalog: https://sciex.com/support/training/course-catalog

3 Day Advanced Forensics Training at SCIEX Location with Invited Expert(s) View Course

Duration: 3 days
Language: Chinese
Type: at SCIEX
Course Level: Advanced

This SCIEX University course is intended to provide experienced LC-MS users with the knowledge necessary to successfully perform LC-MS based method development for Forensic Applications and troubleshoot common MS and HPLC issues. It is delivered at a SCIEX location by an experienced SCIEX instructor and an industry expert. It is intended for those who have completed a SCIEX University Success Program or have at least one year of operational experience with SCIEX LC-MS systems.

Upon completing the course, you should be comfortable with performing instrument tuning and calibration, optimizing challenging compounds in ESI and APCI mode, understanding how to build a robust LC-MS method, troubleshooting common HPLC and MS issues, understanding quantitation parameters, and identifying issues with the data results. Industry expert(s) will also share best practices and cutting edge knowledge and industry trend(s).

It includes the following:
- 3-Day of instructor led training at the Partner Location by an Applications Scientist and Industry Expert(s)
- Tuition for 1 Primary Learner to participate (does not include travel and living expenses)
- Certification upon successful completion of final exam
- Access to SCIEX University Self-paced eLearning, lectures, demonstrations as well as SCIEX Now online Support tools
- Valid for 12 months from date of purchase.

See latest course information in the SCIEX University online Catalog: https://sciex.com/support/training/course-catalog

3 Day Advanced LC-MS/MS Quantitation: Method Development & Troubleshooting at SCIEX Location View Course

Duration: 3 days
Language: German,English
Type: at SCIEX
Course Level: Advanced
Rating:

★★★★★

★★★★★

This training course is intended to provide experienced LC-MS users with the knowledge necessary to successfully perform LC-MS based method development and troubleshoot common MS and HPLC issues. The course is focused on small molecule quantitation. It provides instructor led training with a variety of hands-on exercises, best practices and finishes with a Troubleshooting Challenge for the learner. It is delivered at a SCIEX location by an experienced SCIEX instructor. It is intended for those who have completed a SCIEX University Success Program and have at least one year of operational experience with SCIEX LC-MS systems. Upon completing the course, you should be comfortable with performing instrument tuning and calibration, optimizing tricky compounds in ESI and APCI mode, understanding how to build a robust LC-MS method, troubleshooting common method development and LC-MS system issues, understanding quantitation parameters, and identifying issues with the data results.

Prerequisites: One year of practical experience operating a SCIEX system or participation in a Success Program are course pre-requisites.

It is currently offered for the following instruments and workflows:

LC Systems: SCIEX ExionLC, Shimadzu (LC-20AD, LC-20ADXR, LC-20AT, LC-30AD), Agilent (1260, 1260 Infinity II, 1290, 1290 Infinity II) and Jasper HPLC System (in applicable regions).
MS Instruments: All versions of SCIEX Triple Quad and QTRAP LC-MS systems (RUO and MD versions).
Workflows: Quantitation of small molecules in Clinical Diagnostics, Clinical Research, Forensics, Food or Environmental testing

The instrument model used during training may be different from your instrument model. but procedures will be the same or similar and will include content relevant for all.

The course includes the following:

3 days of instructor led training at a SCIEX location by an Applications Scientist
Tuition for 1 Primary Learner to participate (does not include travel and living expenses)
Workflow certificate upon successful completion of final exam
Access to SCIEX Now Learning Hub Self-paced eLearning, lectures, demonstrations as well as SCIEX Now online Support tools
Valid for 12 months from date of purchase.

To complete this course and earn a certificate, you must complete a final exam at the end of the course. All content required for the exam is covered during the 3 days of training and no additional preparation time should be required.
Upon payment for the course, you will be enrolled in the Advanced LC-MS/MS Quantitation: Method Development and Troubleshooting at SCIEX Location Learning Path on SCIEX Now Learning Hub.

CANCELLATION or RESCHEDULING POLICY

For cancellation/rescheduling, please contact us at least 2 weeks prior to the start of class.
We reserve the right to cancel a class until 3 weeks prior to the start date of the training class. If the class is cancelled, we will assist you in rescheduling.

TRAINING LOCATION ADDRESS

500 Old Connecticut Path, Framingham, MA 01701
Landwehrstraße 54, 64293 Darmstadt, Germany

3 Day Introduction to Triple Quad at SCIEX Location View Course

Duration: 3 days
Language: German,English
Type: at SCIEX
Course Level: Basic
Rating:

★★★★★

★★★★★

This is an introductory mass spectrometry class designed for attendees who will be working on small molecule quantitation through MRM(s) or Scheduled MRM using all SCIEX Triple Quad™ systems. Attendees are provided with Triple Quad basic theory and a technology overview of the instrument and software as it relates to analyzing small molecules. The course is divided between classroom based lectures providing LC-MS/MS theory and hands-on laboratory exercises designed to reinforce lecture fundamentals. Emphasis is placed on optimizing small molecule compounds and building data acquisition methods for quantitative analysis on the LC-MS/MS system. In addition, a preventative maintenance demonstration will be included. Upon completion of the course, attendees should have an understanding of LC/MS/MS theory as it relates to operating the instrument and quantitation.

It supports the following systems:
MS Instruments: All SCIEX Triple Quad LC-MS systems (RUO and MD versions).

Please note that the exact model used during training may not be available at all locations, but procedures will be the same or similar and will include content relevant for all.

The course includes the following:

3 days of instructor led training at a SCIEX location by an Instructor with Applications expertise
Tuition for 1 Primary Learner to participate (does not include travel and living expenses)
Access to SCIEX Now Learning Hub self-paced eLearning, lectures, demonstrations as well as SCIEX Now online Support tools
Valid for 12 months from date of purchase.

To complete this course and earn a certificate, you must complete a final exam at the end of the course. All content required for the exam is covered during the 3 days of training. No additional preparation time should be required.
Upon payment for the course, you will be enrolled in the Introduction to Triple Quad at SCIEX Location Learning Path on SCIEX Now Learning Hub.

SCIEX is approved as a provider of continuing education programs in the clinical laboratory sciences by the ASCLS P.A.C.E.® Program. Learners interested in obtaining a P.A.C.E.® certificate and P.A.C.E.® accreditation for taking this course (equal to 15 P.A.C.E.® credits) must attend all 3 days and successfully complete all learning modules and a brief evaluation survey.

CANCELLATION or RESCHEDULING POLICY

For cancellation/rescheduling, please contact us at least 2 weeks prior to the start of class. We reserve the right to cancel a class until 3 weeks prior to the start date of the training class. If the class is cancelled, we will assist you in rescheduling.

TRAINING LOCATION ADDRESS

500 Old Connecticut Path, Framingham, MA 01701
1201 Radio Road, Redwood City, CA 94065
Landwehrstraße 54, 64293 Darmstadt, Germany
Phoenix House, Lakeside Drive, Centre Park, Warrington, WA1 1RX, UK

3 Day Introduction to the X500R QTOF System Training at SCIEX Location View Course

Duration: 3 days
Language: Chinese,English
Type: at SCIEX
Course Level: Basic

This is an introductory X500R QTOF mass spectrometry course designed for attendees who will be using SCIEX OS for small molecule quantitation (MRMHR) and/or small molecule screening workflows (IDA and SWATH). The course is divided between classroom-based lectures and hands-on laboratory work. The following topics will be covered: basic QTOF theory, overview of SCIEX X500R QTOF instrument technology, SCIEX OS orientation, instrument tuning and calibration, acquisition method creation (MRMHR, IDA, SWATH), data processing (including an introduction to library searching) and basic instrument maintenance.

The course includes the following:

3 days of instructor led training at a SCIEX location by an instructor with Applications expertise
Tuition for 1 Primary Learner to participate (does not include travel and living expenses)
Workflow certificate upon successful completion of final exam
Access to SCIEX Now Learning Hub Self-paced eLearning, lectures, demonstrations as well as SCIEX Now online Support tools
Valid for 12 months from date of purchase.

To complete this course and earn a certificate, you must complete a final exam at the end of the course. All content required for the exam is covered during the 3 days of training. No additional preparation time should be required.
Upon payment for the course, you will be enrolled in the Introduction to the X500R QTOF System at SCIEX Location Learning Path on SCIEX Now Learning Hub.

CANCELLATION or RESCHEDULING POLICY

For cancellation/rescheduling, please contact us at least 2 weeks prior to the start of class.
We reserve the right to cancel a class until 3 weeks prior to the start date of the training class. If the class is cancelled, we will assist you in rescheduling.

TRAINING LOCATION ADDRESS

500 Old Connecticut Path, Framingham, MA 01701

3 Day Quantitative Analysis of Pesticides in Cannabis Products at SCIEX Location View Course

Duration: 3 days
Language: English
Type: at SCIEX

This training course is focused on quantitative pesticide analysis in cannabis products, using SCIEX Triple Quad and QTRAP instruments. It is delivered at a SCIEX location by an experienced SCIEX instructor. A combination of instructor-led and hands-on approaches are used. The course covers basic topics including: LCMS theory, Analyst Software familiarization, instrument tuning and calibration, compound optimization, and quantitation. Specific topics for cannabis pesticide testing include sample preparation of cannabis products, basic chromatographic method development, analysis of cannabis matrices for pesticides, and troubleshooting. Upon completion of the course, you should be able to perform source and compound optimization, create Scheduled MRM acquisition methods, perform quantitation, troubleshoot and maintain your system. You should be able to transfer the principles and practices learned throughout the course and apply them to your specific workflow. This course is intended for new SCIEX LC-MS instrument users working in the cannabis industry, or non-SCIEX users seeking a detailed overview of pesticide analysis in cannabis products.

The instrument model used during training may be different from your instrument model., but procedures will be the same or similar and will include content relevant for all.

The course includes the following:

3 days of instructor led training at SCIEX location by an Instructor with Applications expertise
Tuition for 1 Primary Learner to participate (does not include travel and living expenses)
Workflow certificate upon successful completion of final exam
Access to SCIEX Now Learning Hub self-paced eLearning, lectures, demonstrations as well as SCIEX Now online Support tools
Valid for 12 months from date of purchase

To complete this course and earn a certificate, you must complete a final exam at the end of the course. All content required for the exam is covered during the 3 days of training. No additional preparation time should be required.
Upon payment for the course, you will be enrolled in the Quantitative Analysis of Pesticides in Cannabis Products Training at SCIEX Location Learning Path on SCIEX Now Learning Hub.

CANCELLATION or RESCHEDULING POLICY

For cancellation/rescheduling, please contact us at least 2 weeks prior to the start of class.
We reserve the right to cancel a class until 3 weeks prior to the start date of the training class. If the class is cancelled, we will assist you in rescheduling.

TRAINING LOCATION ADDRESS

6390 Joyce Dr # 100, Golden, CO 80403

3 Day Transition to SCIEX OS for SCIEX Triple Quad and QTRAP Systems Virtual View Course

Duration: 3 days
Language: English
Type: Paid Online, Instructor Led Virtual
Course Level: Advanced

This training program is a unique blend of instructor-led training, hands-on laboratory exercises and self-paced eLearning provided in a virtual format. It follows the proven spaced learning approach to maximize learning retention. This course is intended for those who are experienced with the operation of SCIEX LC-MS/MS systems. This program is currently offered on all SCIEX Triple Quad and QTRAP systems that support acquisition using SCIEX OS. Upon completion of the course, you should be comfortable with creating and optimizing SCIEX OS acquisition methods, performing data acquisition and quantitative data processing, and maintaining and troubleshooting your system.

It includes the following:

9 hours of virtual instruction delivered over 3 days by an experienced Applications Support Scientist.
Related self-paced eLearning courses, reference material and lab exercises.
Workflow certificate upon successful completion of a final exam and permanent access to all course materials for reference.
Access to SCIEX Now Learning Hub database of >100 eLearning courses as well as SCIEX Now online for all your support needs.
Valid for 12 months from date of purchase.

To complete this course and earn a workflow certificate, you must complete a final exam at the end of the course. All content required for the exam is covered during the 3 days of training and no additional preparation time should be required.
Upon payment for the course, you will be enrolled in the Transition to SCIEX OS for SCIEX Triple Quad and QTRAP Systems Virtual learning path on SCIEX Now Learning Hub.

CANCELLATION or RESCHEDULING POLICY

For cancellation/rescheduling, please contact us at least 2 weeks prior to the start of class.
We reserve the right to cancel a class until 3 weeks prior to the start date of the training class. If the class is cancelled, we will assist you in rescheduling.

3 Day TripleTOF Training for Small Molecule Workflows at SCIEX View Course

Duration: 3 days
Language: English
Type: at SCIEX
Course Level: Basic

This training course is intended for new TripleTOF system users. Emphasis is placed on basic instrument tuning, calibration, basic operation and Information Data Acquisition (IDA) for Small Molecule Workflows. Additional topics covered include: MRMHR, PeakView Software, MasterView Software for Targeted and Unknown Screening, MultiQuant Software, SWATH acquisition, troubleshooting and instrument maintenance. Upon completion of the course, attendees should have an understanding of the SCIEX TripleTOF system as it relates to Small Molecule targeted and Non-targeted workflows. The ultimate goal is that attendees will be capable of transferring the principles and practices learned throughout the course and apply them to their specific workflows.

The instrument model used during training may be different from your instrument model, but procedures will be the same or similar and will include content relevant for all.

It includes the following:

3 days of instructor led training at a SCIEX location by an Instructor with Applications expertise
Tuition for 1 Primary Learner to participate (does not include travel and living expenses)
Access to SCIEX Now Learning Hub self-paced eLearning, lectures, demonstrations as well as SCIEX Now online Support tools
Valid for 12 months from date of purchase

CANCELLATION or RESCHEDULING POLICY

For cancellation/rescheduling, please contact us at least 2 weeks prior to the start of class.
We reserve the right to cancel a class until 3 weeks prior to the start date of the training class. If the class is cancelled, we will assist you in rescheduling.

TRAINING LOCATION ADDRESS

500 Old Connecticut Path, Framingham, MA 01701

32 Karat Software at SCIEX (1-day) View Course

Duration: 1 day
Language: German
Type: at SCIEX
Course Level: Intermediate

Product Number: 149849 Cost: Contact cesupport@sciex.com Location: Darmstadt, Germany

Description: This SCIEX University course uses hands-on practice to cover data analysis using 32 Karat Software. This course is provided in German.

It includes:
1 Day of instructor led training at a SCIEX Location by an Instructor with Applications expertise
Tuition for 1 Primary Learner to participate (does not include travel and living expenses)
Valid for 12 months from date of purchase
A course agenda can be viewed in the Resources section on the course page

CANCELLATION or RESCHEDULING POLICY

For cancellation/rescheduling, please contact us at least 2 weeks prior to the start of class.
We reserve the right to cancel a class until 3 weeks prior to the start date of the training class. If the class is cancelled, we will assist you in rescheduling.

TRAINING LOCATION ADDRESS

Landwehrstraße 54, 64293 Darmstadt, Germany

For any help regarding this training course, please contact cesupport@sciex.com

32karat™软件权限管理和审计追踪 32karat™软件培训 (1天) View Course

Duration: 1 day
Language: Chinese
Type: at Customer
Course Level: Intermediate

本课程由资深应用工程师提供用户现场培训，并提供一份用户培训资料。

32karat™软件是SCIEX毛细管电泳的核心部分之一，熟练掌握软件操作才能顺利进行毛细管电泳相关实验。完成本次培训后，用户将掌握 32karat™软件的配置方法，熟练用软件进行数据采集和结果处理，同时还能掌握 32karat™软件的权限设置和审计追踪等数据安全所需功能。本课程适合不熟悉32karat™软件操作的新用户以及希望开启审计追踪的用户进一步了解 32karat™软件功能。

32karat™软件培训内容包括：

√ 32karat™软件配置；

√ 软件基本功能（仪器控制、采集数据）；

√ 数据处理（积分、定量分析、报告）；

√ 32karat™软件权限设置和审计追踪；

4 Day Introduction to Triple Quad Virtual View Course

Duration: 4 days
Language: English
Type: Paid Online, Instructor Led Virtual
Course Level: Basic

This training program is a unique blend of instructor-led training, hands-on laboratory exercises and self-paced eLearning provided in a virtual format. It follows the proven spaced learning approach to maximize learning retention. This is an introductory mass spectrometry class designed for learners who will be working on small molecule quantitation through MRM(s) or Scheduled MRM using all SCIEX Triple Quad systems. Upon completion of the course, you should be comfortable with performing instrument tuning and calibration, optimizing compound and source parameters, creating MRM and Scheduled MRM methods, performing data acquisition and quantitative processing, and maintaining your instrument.

The course includes the following:

16 hours of virtual instruction delivered over 4 days by an experienced Applications Support Scientist.
Related self-paced eLearning courses, reference material and lab exercises.
Workflow Certificate upon successful completion of a final exam and permanent access to all course materials for reference.
Access to SCIEX Now Learning Hub database of >100 eLearning courses as well as SCIEX Now online for all your support needs.
Valid for 12 months from date of purchase.

To complete this course and earn a workflow certificate, you must complete a final exam at the end of the course. All content required for the exam is covered during the 4 days of training and no additional preparation time should be required.

Prerequisites: One year of practical experience operating a SCIEX system or participation in a Success Program are course pre-requisites.

Upon payment for the course, you will be enrolled in the Introduction to Triple Quad Virtual learning path on SCIEX Now Learning Hub.

CANCELLATION or RESCHEDULING POLICY

For cancellation/rescheduling, please contact us at least 2 weeks prior to the start of class.
We reserve the right to cancel a class until 3 weeks prior to the start date of the training class. If the class is cancelled, we will assist you in rescheduling.

4 Day LC-MS Method Validation Virtual View Course

Duration: 4 days
Language: English
Type: Paid Online, Instructor Led Virtual
Course Level: Advanced,Intermediate

This training program is intended for intermediate to advanced learners who have completed a Success Program, or have significant operational experience with SCIEX LC-MS/MS systems. It is intended to provide the learner with the knowledge necessary to successfully validate an LC-MS/MS assay on SCIEX systems. The training process includes a blend of instructor-led training, hands-on exercises and self-paced eLearning, provided in a virtual format. This training is a mixture of synchronous and asynchronous training delivered over 4 days. Daily video conferencing sessions will be conducted by an instructor to explain and demonstrate each topic. Exercises and data files are provided to allow you to practice the principles demonstrated during the instructor-led sessions at a later time at your own pace. Upon completion of the course, you should understand validation principles and parameters, be able to perform sample preparation, review data, and troubleshoot some common issues encountered during method validation.

Prerequisites: One year of practical experience operating a SCIEX system or participation in a Success Program are course pre-requisites.

The course includes the following:

12 hours of virtual instruction delivered over 4 days by an experienced Applications Support Scientist
Related self-paced eLearning courses, reference material and lab exercises
Workflow certificate upon successful completion of a final exam and permanent access to all course materials for reference
Access to SCIEX Now Learning Hub database of >100 eLearning courses as well as SCIEX Now online for all your support needs
Valid for 12 months from date of purchase.

To complete this course and earn a workflow certificate, you must complete a final exam at the end of the course. All content required for the exam is covered during the 4 days of training. No additional preparation time should be required.
Upon payment for the course, you will be enrolled in the LC-MS Method Validation Virtual Learning Path on SCIEX Now Learning Hub.

CANCELLATION or RESCHEDULING POLICY

For cancellation/rescheduling, please contact us at least 2 weeks prior to the start of class.
We reserve the right to cancel a class until 3 weeks prior to the start date of the training class. If the class is cancelled, we will assist you in rescheduling.

API 2000™ & QTRAP® System Source Maintenance View Course

Duration: 20 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This training session describes the maintenance procedures for the API 2000™ and QTRAP® Systems TurboIonSpray® source.

Chapters: 1
Certificate Type: None
PACE Accreditation: No

API 2000™ & QTRAP® System Source Optimization View Course

Duration: 20 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This training session describes the optimization procedures for the API 2000™ and QTRAP® Systems TurboIonSpray® source. The topics include but are not limited to: probe alignment, manual and automated source optimization.

Chapters: 1
Certificate Type: None
PACE Accreditation: No

API 3000™ System Source Maintenance View Course

Duration: 20 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This training session describes the maintenance procedures for the API 3000™ System TurboIonSpray® source.

Chapters: 1
Certificate Type: None
PACE Accreditation: No

API 3000™ System Source Optimization View Course

Duration: 20 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This training session describes the optimization procedures for the API 3000™ System TurboIonSpray® source. The topics include but are not limited to: probe alignment, manual and automated source optimization.

Chapters: 1
Certificate Type: None
PACE Accreditation: No

Agilent Lab Advisor Software View Course

Duration: 20 mins
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This course will introduce you to the Agilent Lab Advisor Software and give you an overview of the software and its functionality.

After taking this course, you should be able to:

Add and connect a system
Configure your system
Update the firmware
View logs, messages and results for your system
Perform Service and Diagnostics procedures
Control your system using Lab Advisor software
View and update EMF counters
Create reports

Chapters: 1
Certificate Type: Completion
PACE Accreditation: None

Analyst TF 软件介绍(Introduction to Analyst TF) View Course

Duration: 20 minutes
Language: Chinese
Type: Free Online, eLearning Course
Course Level: Basic

本课程将向您介绍Analyst TF软件，并对该软件及其功能进行概述。

完成课程后，将能够：

-创建硬件配置文件

-优化仪器

-了解MS/MS^ALL SWATH^TM、IDA和MRM ^HR扫描类型

-创建TOF MS 和IDA方法

-创建和提交批次

-浏览数据

证书类别: 结课

PACE 认证: No

Analyst 软件数据库搜索功能(Analyst Software - Library Search) View Course

Duration: 30 minutes
Language: Chinese
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

本在线学习课程主要介绍数据库搜索的基础功能。内容包含但不限于：数据库的储存位置、如何关联数据库、如何在数据库中添加和编辑化合物、如何展示数据库内容，以及如何在数据库中搜索未知物。

时长：约8 min

Analyst 软件数据浏览模块概览(Analyst® Software - Explore) View Course

Duration: 15 minutes
Language: Chinese
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

该自学培训课程介绍了在Analyst和Analyst MD软件的Explore模块下处理数据文件的基本功能。主题包括但不限于:打开数据文件、缩放谱图、设置背景区域、生成质谱图、生成提取离子色谱图、数据平滑、谱图标记、处理插件和片段解析工具。

时长: 约 15 min

Analyst 소프트웨어 - 조정 및 보정(Analyst Software - Tune and Calibrate) View Course

Duration: 40 minutes
Language: Korean
Type: Free Online, eLearning Course
Course Level: Intermediate

이 자가 주도형 교육 세션에서는 Triple Quadrupole 과 QTRAP 장비 시스템의 분해능과 보정에 사용되는 Analyst 및 Analyst MD 소프트웨어 사용 방법에 대한 기본 사항을 중점으로 설명합니다. 주제는 다음과 같습니다.

분해능 최적화
분해능 피크 스펙트럼 검토
스펙트럼에서 질량 보정
질량 보정 보고서 및 질량 보정 결과

인증: 없음
PACE 승인: 없음

Analyst® Software - Acquire View Course

Duration: 15 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This training courses focuses on method creation and data acquisition using Analyst and Analyst MD software. It covers the following topics:

Creation of basic and advanced acquisition methods such as scheduled-ionization, Scheduled MRM (sMRM), multiple periods and IDA experiments
Creation of an acquisition batch
Submission of the batch to the queue
Starting data acquisition

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Analyst® Software - Compound and Source Optimization View Course

Duration: 25 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This self-paced training session focuses on the basics of using Analyst® and Analyst MD software for compound and source/gas optimization for triple quadrupole and QTRAP® instrument systems. Manual compound and source/gas optimization will be shown. Additionally, automated compound optimization by Infusion and automated source/gas optimization by Flow Injection Analysis will be covered using the Compound Optimization function.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Analyst® Software - Explore View Course

Duration: 20 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This course introduces basic functions for processing data files in the Explore Mode of Analyst and Analyst MD software. Topics include but are not limited to: opening data files, zooming graphs, setting background regions, generating spectra, generating extracted ion chromatograms, data smoothing, graph labeling, processing scripts, and the fragment interpretation tool.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Analyst® Software - Library Search View Course

Duration: 30 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This self-paced training session covers the basics of the Library Search function. Topics include but not limited to: where library databases are stored, how to connect to a library, how to add and edit compounds to a library, how to show the contents of a library, and how to search unknowns against a library.

Chapters: 1
Certificate Type: None
PACE Accreditation: No

Analyst® Software - Quantitation View Course

Duration: 30 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This self paced presentation will take Analyst® Software users through the quantitative work flow of MRM data generated on SCIEX Triple Quad and QTRAP System instruments. Users will learn how to choose the integration algorithms, use the Quantitation Wizard to integrate LC-MS/MS data to perform linear regression and generate reports through the Analyst® Software Reporter tool.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Analyst® Software - Tune and Calibrate View Course

Duration: 40 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This self paced training session focuses on the basics of using Analyst® and Analyst MD software for Resolution and Calibration for triple quadrupole and QTRAP® instrument systems. Topics included are:

Resolution Optimization
Reviewing Resolution Peak Spectra
Mass Calibration from Spectrum
Mass Calibration Report and the Mass Calibration Result.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Analyst® Software - Оптимизация соединений и параметров источника (Analyst® Software - Compound and Source Optimization in Russian) View Course

Duration: 25 minutes
Language: Russian
Type: Free Online, eLearning Course
Course Level: Intermediate

Сессия для самостоятельного изучения фокусируется на основах использования программного обеспечения Analyst® и Analyst MD для оптимизации соединений и параметров источника ионизации/газов для тройных квадруполей и систем QTRAP®. Включает в себя демонстрацию ручной оптимизации соединений и параметров источника ионизии/газов. Также во время сессии будет рассмотрена автоматическая оптимизация соединений с помощью метода инфузии и метода проточно-инжекционного анализа (ПИА).

Глава: 1
Продолжительность: 25 мин

Analyst® Software - 化合物とイオンソースの最適化 (Analyst Software - Compound and Source Optimization) View Course

Duration: 25 mins
Language: Japanese
Type: Free Online, eLearning Course
Course Level: Intermediate

本トレーニングコースはAnalyst®およびAnalyst MDソフトウェアで制御する四重極およびQTRAP®装置における基本的な化合物とイオンソース/ガスの最適化に焦点を当てた内容で、受講者のペースで進めていただけます。インフュージョンを用いて手動で行うこれらのパラメータの最適化について説明されており、加えてFIAモードで行う化合物パラメータ自動最適化のプロセスもカバーされています。

時間：およそ25分

Analyst® Software Overview View Course

Duration: 30 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Basic
Rating:

★★★★★

★★★★★

This self-paced training session introduces basic operation of Analyst® and Analyst MD software for the new user. Topics include but not limited to: user interface, project folders and their structure, system status icons, five modes of the software, how to find help files, hardware profiles, audit trail, and basic computer maintenance. Learners interested in obtaining a PACE certificate and PACE accreditation for taking this course (equal to 0.5 PACE credit) must successfully complete the learning module and a brief online evaluation survey.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: Yes

Analyst® ソフトウェア- 検証とキャリブレーション (Analyst Software - Tune and Calibrate) View Course

Duration: 35 minutes
Language: Japanese
Type: Free Online, eLearning Course
Course Level: Intermediate

このコースは、セルフペース型のトレーニングプログラムです。トリプル四重極およびQTRAP^®装置の分解能と質量精度の調整を行うための基本的なAnalyst^®およびAnalyst MDソフトウェア操作に焦点を当てご説明しています。
含まれるトピックは次のとおりです。：
必要な試薬
手動による分解能と質量精度の確認
手動による分解能補正と質量精度補正
Instrument Optimization機能を用いた自動キャリブレーション
自動キャリブレーションの結果とそのレポートについて

所要時間：約35分

Analyst® ソフトウェアの概要 (Analyst Software Overview) View Course

Duration: 24 minutes
Language: Japanese
Type: Free Online, eLearning Course
Course Level: Basic

このコースは、セルフペース型のトレーニングプログラムです。操作にまだ慣れておられないユーザー様向けに、Analyst®およびAnalyst MDソフトウェアの基本的な操作方法をご紹介しています。トピックには以下の内容を含みますが、これらだけに限りません。：ソフトウェアインターフェースの概要、Projectフォルダとその構造、System Status（システムステータス）アイコン、ソフトウェアの5つのモード、Helpの位置、Hardware Profile（ハードウェアプロファイル）の設定、セキュリティー設定やAudit Trail（監査証跡）機能、基本的なコンピュータメンテナンス。このコースを受講してPACEの証明書・修了証とPACE認定（0.5 PACEクレジットに相当）を取得したい方は、モジュールの学習を終え、習得度を確認するクイズに合格してください。

Analyst® ソフトウェア－Acquireモード（Analyst® Software – Acquire） View Course

Duration: 15 mins
Language: Japanese
Type: Free Online, eLearning Course
Course Level: Intermediate

このトレーニングコースでは、AnalystとAnalyst MDソフトウェアを利用したAcquisition Methodの作成とデータ取得に焦点を当てご紹介します。以下のトピックを含みます。：
- 基本的なAcquisition Methodの作成方法、Scheduled -ionization機能、Scheduled MRM(sMRM)、複数のPeriodやIDA Experimentを含む応用的なAcquisition Methodの作成方法
- Acquisition Batchの作成方法
- Batch のQueue（キュー）へのSubmit方法
- データ取得の開始方法

所要時間: 15分
学習レベル:中級
コース修了認定証：有り
P.A.C.E. 認定対象: 対象外

Analyst® ソフトウェア－Exploreモードの概要（Analyst® Software – Explore） View Course

Duration: 15 minutes
Language: Japanese
Type: Free Online, eLearning Course
Course Level: Intermediate

このコースでは、Analyst および Analyst MD ソフトウェアの Explore モードでデータファイルを処理するための基本的な機能をご紹介します。このコースでは、データファイルの開き方、グラフを拡大する方法、バックグラウンドの減算、スペクトルの表示方法、抽出イオンクロマトグラムの表示方法、データのスムージング方法、グラフのラベリング、便利なスクリプト、Fragment Interpretation Toolなどの基本的な機能をご紹介します。

チャプター数：1
所要時間：約15分
学習レベル:中級
コース修了認定証：有り
P.A.C.E. 認定対象: 対象外

Analyst® 软件的调谐与校准 View Course

Duration: 35 minutes
Language: Chinese
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

本自控速培训的主要内容为使用Analyst®软件为三重四极杆和线性离子阱系统进行验证和校准。包括根据指标验证和校准单位分辨率、质量数偏移、峰值强度，也介绍了如何检查校正结果。

学习时长：约35分钟。

Analyst® 소프트웨어 개요(Analyst® Software Overview) View Course

Duration: 30 minutes
Language: Korean
Type: Free Online, eLearning Course
Course Level: Basic

이 자가 주도형 교육 세션에서는 새 사용자를 위한 Analyst® 소프트웨어 기본 작동 방법을 설명합니다. 주제에는 사용자 인터페이스, 프로젝트 폴더 및 구조, 시스템 상태 아이콘, 소프트웨어의 5가지 모드, 도움말 파일을 찾는 방법, 하드웨어 프로필, 감사 추적 및 기본 컴퓨터 유지관리 등이 포함되어 있으나 이에 국한되지 않습니다. 이 강좌 이수에 대한 PACE 인증서와 PACE 승인 획득(PACE 크레딧 한 개(1)와 동일)에 관심 있는 학습자는 학습 모듈과 간단한 온라인 평가 조사를 성공적으로 완료해야 합니다.

기간: 약 24분

Analyst® 소프트웨어: 수집 모드(Analyst - Acquire) View Course

Duration: 20 minutes
Language: Korean
Type: Free Online, eLearning Course
Course Level: Intermediate

이 교육 강좌에서는 Analyst 및 Analyst MD 소프트웨어를 사용한 분석법 만들기와 데이터 수집을 집중적으로 설명합니다. 다음 주제로 구성되어 있습니다.
- 예약 이온화, Scheduled MRM (sMRM), 여러 기간 및 IDA 실험과 같은 기본 및 고급 수집 방법 만들기
- 수집 배치 만들기
- 배치를 대기열에 제출
- 데이터 수집 시작

기간: 15분
학습자 수준: 기초
인증 유형: 완료
PACE 승인: 없음

Analyst® 소프트웨어화합물 및 소스 최적화(Compound and Source Optimization) View Course

Duration: 25 minutes
Language: Korean
Type: Free Online, eLearning Course
Course Level: Intermediate

이 자가 주도형 교육 세션에서는 Triple Quadrupole과 QTRAP® 장비 시스템의 화합물 및 소스/가스를 최적화할 수 있는 Analyst® 및 Analyst MD 소프트웨어 사용 방법에 대한 기본 사항을 중점으로 설명합니다. 수동 화합물 및 소스/가스 최적화를 설명합니다. 또한 화합물 최적화 기능을 사용하여 주입을 통한 자동 화합물 최적화 및 플로 인젝션 분석을 통한 자동 소스/가스 최적화를 설명합니다.

기간: 약 25분

Analyst®软件概览 View Course

Duration: 30 minutes
Language: Chinese
Type: Free Online, eLearning Course
Course Level: Basic
Rating:

★★★★★

★★★★★

本自助学习课程是针对新用户的Analyst软件的基础培训。课程内容包括以下内容的详细介绍：

Analyst用户界面概览 - 项目文件夹及其结构、系统状态图标
Analyst软件模块功能介绍 - 硬件配置、调谐和校准、建立采集方法和批次、Explore、定量
计算机维护的注意事项

获得这门课程的PACE证书和PACE认证之前（等于1个PACE学分），学员需要学完本课程和完成一个简短的在线调查。

时长：约24 min

Analyst软件化合物和离子源优化操作培训 View Course

Duration: 25 minutes
Language: Chinese
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

本自助学习课程主要讲解了在四极杆和线性离子阱仪器上使用Analyst软件进行source/gas优化的过程。手动化合物和source/gas优化都将介绍到。另外，课程还概况了使用针泵和流动注射分析的自动优化功能。

时长：约25min

Analyst软件的采集功能 View Course

Duration: 15 minutes
Language: Chinese
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

本自助学习课程主要讲解如何新建基础的采集方法，包括新建采集批次、向序列中提交批次和运行采集等步骤。

学习时长：15分钟左右

Application Tips for Optimal Sensitivity View Course

Duration: 20 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Advanced
Rating:

★★★★★

★★★★★

This self-paced, online training session will provide Triple Quadrupole and QTRAP® System users with some practical suggestions to improve the sensitivity of their experiments.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

AutoPeak Essentials View Course

Duration: 15 mins
Language: English
Type: Premium, eLearning Course
Course Level: Advanced
Rating:

★★★★★

★★★★★

This course covers an overview of the AutoPeak integration algorithm available in the Analytics workspace of SCIEX OS software.

After taking this course, you should be able to:

understand the theory of the AutoPeak integration algorithm
create a processing method using AutoPeak
describe basic and advanced AutoPeak integration parameters
explain how saturation correction is applied
create results and review data using AutoPeak

Chapters: 1
Certificate Type: Completion
PACE Accreditation: None

Automated Carryover Monitoring for the MPX 2.0 High Throughput System View Course

Duration: 20 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Advanced
Rating:

★★★★★

★★★★★

This course will introduce you to the MPX2.0 High Throughput System and how automated carryover monitoring works.

After taking this course, you should be able to:

Describe how multiplexing works
Explain the automated carryover monitoring process
Create acquisition and quantitation methods
Create and submit a batch
Review the batch in the MPX software

Chapters: 1
Certificate Type: Completion
PACE Accreditation: None

Basic Operation and Maintenance of the CESI 8000 Plus System View Course

Duration: 30 mins
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This eLearning course will cover the basic operation and maintenance for the CESI 8000 Plus system.

After completing this course, you should be able to:

Understand the different modes of operation for CESI-MS
Understand the appropriate parameters and instrument settings for connecting the CESI 8000 Plus system to an MS System
Be familiar with different capillary types
Perform basic maintenance on your system

Chapters: 1
Certificate Type: Completion
PACE Accreditation: None

BioPharmaView Software 3.0 for MAM Workflow View Course

Duration: 15 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This course will show you how to process data for a structured Multiple Attribute Methodology (MAM) workflow using BioPharmaView ^TMSoftware 3.0.

This course covers the following topics:

Overview of BioPharmaView Software 3.0
What is MAM?
Benefits of using a MAM approach
Step by Step Data Processing for MAM Workflow using BioPharmaView Software

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Biologics CE 사용자 교육 : Method Development View Course

Duration: 1 day
Language: Korean
Type: at SCIEX
Course Level: Advanced

분기별로 진행하는 'Biologics CE 사용자 교육'은 3가지 교육으로 나누어 진행하고 있습니다. Method Development 교육은 CE 분석법을 테스트 혹은 개발하는 분들을 위한 교육으로, 분석법의 변경 및 개발 전략, 당분석, MS 분석등에 대한 광범위한 주제를 다룹니다. 본 교육은 전날 교육인 Troubleshooting 과정과 함께 수강하실 것을 권고드립니다. 코로나로 인해 2021년은 온라인 교육으로 진행될 예정이고, 온라인 교육은 참석 인원 제한이 없습니다.

교육 내용 및 일정 상세 보기 (hyperlink to https://www.absciex.com/documents/training/kr/KR-Training-Course-Biologics-CE_Trouble-Shooting.pdf)

* 교육 문의 및 담당 : 장서봉 부장 (Tel : 02-2155-4127)

Biologics CE 사용자 교육 : Special Seminar View Course

Duration: 1 day
Language: Korean
Type: at SCIEX
Course Level: Advanced

분기별로 진행하는 'Biologics CE 사용자 교육'은 3가지 교육으로 나누어 진행하고 있습니다. Special Seminar는 최신 분석 트랜드 혹은 새로운 분석 관련 내용을 다루는, 약 2시간 정도의 전문적인 세미나 입니다. 세미나 주제는 매 분기별로 다른 주제를 다룰 예정이고, 교육 1개월 전 메일로 세미나 내용을 공지할 예정입니다. 코로나로 인해 2021년은 온라인 교육으로 진행될 예정이고, 온라인 교육은 참석 인원 제한이 없습니다.

교육 내용 및 일정 상세 보기 (hyperlink to https://www.absciex.com/documents/training/kr/KR-Training-Course-Biologics-CE_Method Development.pdf)

* 교육 문의 및 담당 : 장서봉 부장 (Tel : 02-2155-4127)

Biologics CE 사용자 교육 : Troubleshooting View Course

Duration: 1 day
Language: Korean
Type: at SCIEX
Course Level: Basic

분기별로 진행하는 'Biologics CE 사용자 교육'은 2021년부터 3가지 교육으로 나누어 진행하고 있습니다. Troubleshooting 교육은 주어진 분석법에 따라 CE를 사용하시는 분들을 위한 교육으로, CE 기초이론, Biologics 주요 응용들의 원리와 troubleshooting 중심으로 이루어집니다. 코로나로 인해 2021년은 온라인 교육으로 진행될 예정이고, 온라인 교육은 참석 인원 제한이 없습니다.

교육 내용 및 일정 상세 보기 (hyperlink to https://www.absciex.com/documents/training/kr/KR-Training-Course-Biologics-CE_Trouble-Shooting.pdf)

* 교육 문의 및 담당 : 장서봉 부장 (Tel : 02-2155-4127)

Biologics Characterization on X500B QTOF System eLearning Path View Course

Duration: 20-30 minutes
Language: English
Type: Paid Online, eLearning Path
Course Level: Basic

This SCIEX training program is a self-paced eLearning Path for biologics characterization on X500B QTOF Systems. It is designed for learners with limited operational experience with LC-MS systems and offers a workflow certificate upon completion of a final knowledge assessment. Upon completion of the learning path, you should be able to successfully use your instrument and software for your workflow.

Biologics Workflows Using SCIEX TripleTOF® Mass Spectrometer View Course

Duration: 20 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

In this course, we will walk you through the intact protein molecular weight workflow, peptide mapping and quantitation, MS/MS ALL workflow for host cell protein detection, and the utilization of CESI as an additional separation strategy using the TripleTOF system.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Biopharmaceutical Analysis by CE-SDS at SCIEX (2-day) View Course

Duration: 2 days
Language: German,English
Type: at SCIEX
Course Level: Intermediate

Product Number: 149852 Cost: Contact cesupport@sciex.com Location: Darmstadt, Germany and Alderley Park, UK

Description: This SCIEX University course uses theory, hands-on practice and a troubleshooting section to cover high resolution and high speed CE-SDS methods. This course is provided in English (at the Alderley Park site) and German (at the Darmstadt site).

It includes:
2 Days of instructor led training at a SCIEX Location by an Instructor with Applications expertise
Tuition for 1 Primary Learner to participate (does not include travel and living expenses)
Valid for 12 months from date of purchase
A course agenda can be viewed in the Resources section on the course page

CANCELLATION or RESCHEDULING POLICY

For cancellation/rescheduling, please contact us at least 2 weeks prior to the start of class.
We reserve the right to cancel a class until 3 weeks prior to the start date of the training class. If the class is cancelled, we will assist you in rescheduling.

TRAINING LOCATION ADDRESS

Landwehrstraße 54, 64293 Darmstadt, Germany
Alderley Park, Suite 21F18, No21 Mereside, Nether Alderley K10 4TG, UK

For any help regarding this training course, please contact cesupport@sciex.com

Biopharmaceutical Charge Analysis by cIEF and CZE at SCIEX (2-day) View Course

Duration: 2 days
Language: German,English
Type: at SCIEX
Course Level: Intermediate

Product Number: 149847 Cost: Contact cesupport@sciex.com Location: Darmstadt, Germany and Alderley Park, UK

Description: This SCIEX University course uses theory, hands-on practice and a troubleshooting section to cover cIEF and CZE applications. This course is provided in English (at the Alderley Park site) and German (at the Darmstadt site).

It includes:
2 Days of instructor led training at a SCIEX Location by an Instructor with Applications expertise
Tuition for 1 Primary Learner to participate (does not include travel and living expenses)
Valid for 12 months from date of purchase
A course agenda can be viewed in the Resources section on the course page

CANCELLATION or RESCHEDULING POLICY

For cancellation/rescheduling, please contact us at least 2 weeks prior to the start of class.
We reserve the right to cancel a class until 3 weeks prior to the start date of the training class. If the class is cancelled, we will assist you in rescheduling.

TRAINING LOCATION ADDRESS

Landwehrstraße 54, 64293 Darmstadt, Germany
Alderley Park, Suite 21F18, No21 Mereside, Nether Alderley K10 4TG, UK

For any help regarding this training course, please contact cesupport@sciex.com

CE-LIF糖基分析培训：NCHO/Fast Glycan (1天) View Course

Duration: 1 day
Language: Chinese
Type: at Customer
Course Level: Intermediate

本课程由资深应用工程师提供用户现场培训，并提供一份用户培训资料。

完成本次培训后，用户将了解CE-LIF生物药糖基分析原理及应用；掌握毛细管电泳的基本操作，数据处理方法；仪器日常维护保养技巧及毛细管卡盒安装步骤等知识，并能对生物药糖基分析过程中常见的现象和问题进行分析和解决。

CE-LIF用于糖基分析时可选择NCHO糖基分析和Fast Glycan快速糖基分析两种试剂盒方法，用户可选择其中一种，并在培训前与培训讲师确认。

NCHO糖基分析培训内容具体包括：

√ CE-LIF糖基分析原理及操作流程介绍；

√ NCHO糖基分析实验操作；

√ LIF检测器校准；

√ 32 karat™软件基本操作，数据分析流程；

√ 毛细管卡盒安装及仪器维护保养；

√ 常见问题分析。

Fast Glycan糖基分析培训内容具体包括：

√ CE-LIF糖基分析原理及操作流程介绍；

√ Fast Glycan糖基分析实验操作；

√ LIF检测器校准；

√ 32 karat™软件基本操作，数据分析流程；

√ 毛细管卡盒安装及仪器维护保养；

√ 常见问题分析。

CESI 8000 Plus Training - BioPharma at SCIEX (2-days) View Course

Duration: 2 days
Language: English
Type: at SCIEX
Course Level: Intermediate

Product Number: 608200 Cost: Contact cesupport@sciex.com Location: Darmstadt, Germany

Description: This SCIEX University course covers analysis using the CESI 8000 Plus system for intact proteins and peptide mapping. It includes an introduction to the system and its applications, maintenance of the CESI-MS system, optimization using direct infusion, creating CESI-MS methods and sequences, data analysis and additional method optimization, and finally, troubleshooting and tips and tricks. This course is provided in English or German.

It includes:
2 Days of instructor led training at a SCIEX Location by an Instructor with Applications expertise
Tuition for 1 Primary Learner to participate (does not include travel and living expenses)
Valid for 12 months from date of purchase
A course agenda can be viewed in the Resources section on the course page

CANCELLATION or RESCHEDULING POLICY

For cancellation/rescheduling, please contact us at least 2 weeks prior to the start of class.
We reserve the right to cancel a class until 3 weeks prior to the start date of the training class. If the class is cancelled, we will assist you in rescheduling.

TRAINING LOCATION ADDRESS

Landwehrstraße 54, 64293 Darmstadt, Germany

For any help regarding this training course, please contact cesupport@sciex.com

CESI 8000 Plus Training - Small Molecules at SCIEX (2-days) View Course

Duration: 2 days
Language: English
Type: at SCIEX
Course Level: Intermediate

Product Number: 149850 Cost: Contact cesupport@sciex.com Location: Darmstadt, Germany

Description: This SCIEX University course covers analysis using the CESI 8000 Plus system for small molecules. It includes an introduction to the system and its applications, maintenance of the CESI-MS system, optimization using direct infusion, creating CESI-MS methods and sequences, analysis of data and additional method optimization, and finally, troubleshooting and tips and tricks. This course is provided in English or German.

It includes:
2 Days of instructor led training at a SCIEX Location by an Instructor with Applications expertise
Tuition for 1 Primary Learner to participate (does not include travel and living expenses)
Valid for 12 months from date of purchase
A course agenda can be viewed in the Resources section on the course page

CANCELLATION or RESCHEDULING POLICY

For cancellation/rescheduling, please contact us at least 2 weeks prior to the start of class.
We reserve the right to cancel a class until 3 weeks prior to the start date of the training class. If the class is cancelled, we will assist you in rescheduling.

TRAINING LOCATION ADDRESS

Landwehrstraße 54, 64293 Darmstadt, Germany

For any help regarding this training course, please contact cesupport@sciex.com

CE技术原理及方法开发培训 (2天) View Course

Duration: 2 days
Language: Chinese
Type: at SCIEX
Course Level: Intermediate

CE技术原理及方法开发培训课是毛细管电泳高级培训课之一，旨在提升用户利用毛细管电泳进行方法开发的能力。该培训课在SCIEX培训中心进行，在为期两天的培训中，用户将进一步了解CE的技术原理，CE在蛋白和小分子分析中的方法开发技巧，同时还能进一步巩固毛细管电泳的软、硬件操作和仪器维护保养技巧。本课程适合具有一定CE操作经验的科研用户进一步提升CE操作技能。

培训内容具体包括：

√ CE技术原理及应用介绍；

√ CE方法开发及优化技巧介绍；

√ 蛋白分析实验条件的设计和优化，操作练习，结果分析；

√ 小分子分析实验条件的设计和优化，操作练习，结果分析；

√ 32 karat™软件基本操作，数据分析流程；

√ 毛细管卡盒安装，仪器维护保养；

√ 常见问题分析。

CE生物药糖基分析培训 (2天) View Course

Duration: 2 days
Language: Chinese
Type: at SCIEX
Course Level: Advanced

本培训课在SCIEX培训中心进行，为期两天。培训包含教室讲义授课及实验室实验操作。

糖基修饰是蛋白药物重要的翻译后修饰之一，糖基的种类、数量及连接位点均可能影响着药物的活性。因此，研究蛋白药物上糖基修饰对生物药的开发意义重大。CE生物药糖基分析方法已经完成公示将录入2020版《中国药典》。本培训课旨在让用户掌握SCIEX毛细管电泳生物药糖基分析方法。

培训内容具体包括：

√ CE-LIF生物药糖基分析原理及应用介绍；

√ NCHO糖基分析实验：样品处理及上机操作；

√ Fast Glycan糖基分析实验：样品前处理及上机操作；

√ 32 karat™软件基本操作，数据分析流程；

√ 毛细管卡盒安装，LIF检测器校准及仪器维护保养；

√ LIF检测器校准；

√ CE-LIF糖基分析常见问题分析。

CE生物药纯度和电荷异质性分析培训班(CE-SDS/CIEF/CZE) CE蛋白纯度和电荷异质性分析培训(CE-SDS/CIEF/CZE) (2天) View Course

Duration: 2 days
Language: Chinese
Type: at SCIEX
Course Level: Advanced

本培训课在SCIEX培训中心进行，为期两天。培训包含教室讲义授课及实验室实验操作。

CE蛋白纯度和电荷异质性分析是毛细管电泳在蛋白药物分析中的核心应用，尤其是CE-SDS蛋白纯度分析为药典收录，是企业蛋白药物质控的标准方法。本培训课适合新用户快速熟练仪器及具备一定使用经验的仪器操作员进一步提高实验技能。

培训内容具体包括：

√ CE-SDS原理及应用，还原/非还原实验操作，常见问题分析；

√ CIEF原理及应用，CIEF等电点及电荷异质性分析实验操作，常见问题分析；

√ CZE原理及应用，CZE电荷异质性分析实验操作，常见问题分析；

√ 32 karat™软件基本操作，数据分析流程；

√ 毛细管卡盒安装，仪器维护保养。

Capillary Electrophoresis PA 800 Plus 32 Karat Software (2 days) View Course

Duration: 2 days
Language: English
Type: at SCIEX
Course Level: Intermediate

Product Number: 149846 Price: refer to Admin Locations: Brea, CA or Framingham, MA

32Karat software training is a two-day classroom experience, utilizing hands-on exercises designed to provide you with a solid foundation to acquire and anlyze data effectively.

Outline:
*Instrument Configuration and System Administration
*Direct Control, Methods and Sequences
*Data Analysis and Custom Reports
*Sequence Summary Reports
*Qualitative Analysis
*Calibration
*Mobility
*Data Export
*Trace Subtraction
*Q & A

For travel information go to Brea, California travel information

For travel information go to Framingham, MA

For travel information go to Indianapolis, Indiana travel information

The training is for one participant at a SCIEX location (does not include travel and living expenses)

Any questions, contact - Lisa.Kang@sciex.com

CANCELLATION / RESCHEDULING POLICY

For cancellation/rescheduling, please contact us at na.customertraining@absciex.com at least 3 weeks prior to the start of class.

We reserve the right to cancel a class until 3 weeks prior to the start date of the training class. If the class is cancelled we will assist you in rescheduling or offer you a refund for the cost of the class only.

Capillary Electrophoresis PA 800 Plus Comprehensive Course (4 days) View Course

Duration: 4 days
Language: English
Type: at SCIEX
Course Level: Intermediate

Product Number: 285614 Price: refer to Admin Locations: Brea, CA or Framingham, MA

The comprehensive CE training is composed of three individual courses. These courses will be taught back to back over four days, providing you the option to select individual courses or attend all three courses together.

Outline: see three individual courses
*CE Introduction and Theory

*Basic principles of CE
*Capillary Gel Electrophoresis for Proteins (IgG and SDSMW)
*Charge Heterogeneity Analysis (cIEF and CZE)
*Carbohydrate Analysis
*Free Zone Capillary Electrophoresis (CZE)
*Capillary Gel Electrophoresis for DNA and RNA
*Ion Analysis
*Chiral Analysis
*Q & A

*CE 32 Karat Software

*Instrument Configuration and System Administration
*with Direct Control, Methods and Sequences
*Data Analysis and Custom Reports
*Sequence Summary Reports
*Qualitative Analysis
*Calibration
*Mobility
*Data Export
*Trace Subtraction
*Q & A

*CE Maintenance and Troubleshooting

*PA800Plus Hardware Overview
*PA800Plus Maintenance
*Capillary Cartridge Assembly
*Troubleshooting the Electropherograms
*Common Error Messages
*Application Specific Troubleshooting
*Q & A

For travel information go to Brea, California travel information

For travel information go to Framingham, MA

For travel information go to Indianapolis, Indiana travel information

The training is for one participant at a SCIEX location (does not include travel and living expenses)

Any questions, contact - Lisa.Kang@sciex.com

CANCELLATION / RESCHEDULING POLICY

For cancellation/rescheduling, please contact - na.customertraining@absciex.com at least 3 weeks prior to the start of class.

We reserve the right to cancel a class until 3 weeks prior to the start date of the training class. If the class is cancelled we will assist you in rescheduling or offer you a refund for the cost of the class only.

Capillary Electrophoresis PA 800 Plus Introduction and Theory (1 day) View Course

Duration: 1 day
Language: English
Type: at SCIEX
Course Level: Intermediate

Product Number: 149844 Price: refer to Admin Locations: Brea, CA or Framingham, MA

Instructor Led Course

Capillary Electrophoresis PA800Plus_Introduction and Theory (1day)

This one-day lecture style course provides a sound basis on the fundamentals and theory of capillary electrophoresis and an overview of current chemistries and techniques.

Outline:
*Basic principles of CE
*Capillary Gel Electrophoresis for Proteins (IgG and SDSMW)
*Charge Heterogeneity Analysis (cIEF and CZE)
*Carbohydrate Analysis
*Free Zone Capillary Electrophoresis (CZE)
*Capillary Gel Electrophoresis for DNA and RNA
*Ion Analysis
*Chiral Analysis
*Q & A

For travel information go to

Brea, California travel information

Framingham, MA

Indianapolis, Indiana travel information

The training is for one participant at a SCIEX location (does not include travel and living expenses)

Any questions, contact - Lisa.Kang@sciex.com

CANCELLATION / RESCHEDULING POLICY

For cancellation/rescheduling, please contact us at na.customertraining@absciex.com at least 3 weeks prior to the start of class.

We reserve the right to cancel a class until 3 weeks prior to the start date of the training class. If the class is cancelled we will assist you in rescheduling or offer you a refund for the cost of the class only.

Capillary Electrophoresis PA 800 Plus Maintenance & Troubleshooting (1 day) View Course

Duration: 1 day
Language: English
Type: at SCIEX
Course Level: Intermediate

Product Number: 149845 Price: refer to Admin Locations: Brea, CA or Framingham, MA

In this one-day course, students will learn to troubleshoot methods and electropherogram problems, as well as common system problems. This class includes a troubleshooting workshop and hands-on system maintenance practice.

Outline:
*PA 800 Plus Hardware Overview
*PA 800 Plus Maintenance
*Capillary Cartridge Assembly
*Troubleshooting the Electropherograms
*Common Error Messages
*Application Specific Troubleshooting
*Q & A

For travel information go to Brea, California travel information

For travel information go to Framingham, MA

For travel information go to Indianapolis, Indiana travel information

The training is for one participant at a SCIEX location (does not include travel and living expenses)

Any questions, contact - Lisa.Kang@sciex.com

CANCELLATION / RESCHEDULING POLICY

For cancellation/rescheduling, please contact us at na.customertraining@absciex.com at least 3 weeks prior to the start of class.

We reserve the right to cancel a class until 3 weeks prior to the start date of the training class. If the class is cancelled we will assist you in rescheduling or offer you a refund for the cost of the class only.

Changing the Roughing Pump Oil View Course

Duration: 10 mins
Language: English
Type: Premium, eLearning Course
Course Level: Advanced
Rating:

★★★★★

★★★★★

This course demonstrates how to change the roughing pump oil for your SCIEX mass spectrometer, and is applicable for the following systems:

Triple quadrupole and QTRAP® systems (RUO and MD)
X500 QTOF series systems
TripleTOF® systems

It will cover the following topics:

Overview of why you should change the roughing pump oil and when to change it
Tools and materials needed
Steps involved in the oil change process

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Characterization and Monitoring of PTMs Using Dedicated MAM Solution View Course

Duration: 15 mins
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This video will demonstrate how PTMs can be characterized and monitored using a dedicated multi attribute methodology solution in SCIEX OS.

Chapters: 1
Certificate Type: None
PACE Accreditation: None

Charge Heterogeneity Analysis by cIEF and CZE View Course

Duration: 60 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This course is an overview of charge heterogeneity based analysis using cIEF and CZE. It is a two part course, and covers the theory of the two assays, sample analysis using the methods, kits and PA 800 Plus system, and finally how to troubleshoot common issues. You must complete Part A before continuing onto Part B.

After taking this course, you should be able to:

Understand the importance of charge heterogeneity characterization
Describe the relationship between pH and protein charge
Perform sample analysis using High Performance Capillary Isoelectric Focusing (cIEF)
Perform sample analysis using Capillary Zone Electrophoresis
Troubleshoot common issues

Chapters: 2
Certificate Type: Completion
PACE Accreditation: None

Creating Flagging Rules and Custom Columns in SCIEX OS View Course

Duration: 20 mins
Language: English
Type: Free Online, eLearning Course
Course Level: Advanced
Rating:

★★★★★

★★★★★

This eLearning course will cover several examples of how to create flagging rules and custom columns in SCIEX OS.

After completing this course, you should be able to:

Create custom columns
Create flagging rules using default and custom columns
Perform data review using flagging rules and custom columns
Import and export flagging rules into a method.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: None

Data Acquisition and Processing using the Lipidyzer Platform View Course

Duration: 10-20 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This course is comprised of 4 chapters that cover the data acquisition and processing workflow on the Lipidyzer ^TMPlatform. It is intended that you view each of these chapters in the following sequence shown. You will achieve a certificate once you have successfully completed all four chapters of this course.

Chapter 1: Performance Tests teaches you how to run the performance tests for the Lipidyzer Platform in order to ensure that settings for each lipid class are correct and to verify that the instrument is performing to specification.
Chapter 2: Batch Generation teaches you how to register an internal kit and then create a Lipidyzer Workflow.
Chapter 3: Sample Extraction tells you how to create an internal standard superpool mix and complete a successful Bligh & Dyer Lipid extraction.
Chapter 4: Results shows you how to view and report your results from your samples using the projects and batches functions in the Lipidomics software.

Chapters: Four (4)
Certificate Type: Completion
PACE Accreditation: No

DiscoveryQuant™ Analyze Software-Version 2.1 View Course

Duration: 20 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This training module presents the new features and work flow of DiscoveryQuant™ Software 2.1 Analyze. The use of optimized parameters from the DiscoveryQuant™ Software 2.1 Database is described to build Multiple Reaction Monitoring (MRM) acquisition methods. The procedures for DiscoveryQuant™ Software 2.1 Analyze sample batch template creation and sample analysis submission are presented. Data integration and final report generation are also covered.

Chapters: 1
Certificate Type: None
PACE Accreditation: No

DiscoveryQuant™ Optimize Software-Version 2.1 View Course

Duration: 20 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This training module presents the new features and work flow of DiscoveryQuant™ Software 2.1 Optimize. Initial hardware and starter method setup are reviewed. Automatic compound optimization through Flow Injection Analysis (FIA) is described including the use of the new QuickTune and FineTune options. Compound review using the DiscoveryQuant™ Software 2.1 Database is also covered.

Chapters: 1
Certificate Type: None
PACE Accreditation: No

Echo MS 系统操作教程 (Introduction to the Operation Series for the Echo MS） View Course

Duration: 65 mins
Language: Chinese
Type: Free Online, eLearning Course
Course Level: Basic

本在线学习系列旨在介绍如何使用Echo MS®系统进行基本的定量工作流程。课程由四个单元组成:实验室安全须知、实验准备、数据采集和数据分析。

实验室安全须知和实验准备包括适当的实验室安全程序、如何准备系统、流动相和样本。

数据采集包括创建MS和AE方法以及如何采集数据。

数据分析主要演示如何创建处理方法、处理和查看数据、生成报告和执行自动触发的数据处理。

如果需要，在页面上的“资源”标签中可以查看用作数据处理的示例数据。

单元数：4
学习时长：每单元5-20min
课程级别：初级
证书类型：完成
PACE 认证：NO

Echo® MS 系统介绍 (Introduction to the Echo® MS ) View Course

Duration: 15 mins
Language: Chinese
Type: Premium, eLearning Course
Course Level: Intermediate

本在线课程是对Echo^® MS系统的概览介绍。课程将讲授以下内容：

Echo MS 系统的部件和原理
如何通过 SCIEX OS 配置Echo MS 系统
建立方法
使用直接设备控制( Direct Device Control )
执行维护工作

单元数：1
证书类别：Completion
PACE 认证：None

Eksigent Ekspert™ microLC 200 System Maintenance and Troubleshooting View Course

Duration: 40 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This eLearning course will walk you through the maintenance and troubleshooting of Eksigent expert™ microLC 200 System. You have the option to advance to any specific topic of interest.

Chapters: 1
Certificate Type: None
PACE Accreditation: No

Eksigent NanoLC™ System View Course

Duration: 20 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

The Eksigent NanoLC™ Course is designed to provide the new user a primer on how to use the NanoLC in their experimental workflows and how to address common pitfalls that can arise when using the instrument, especially during the familiarization stages of its use. It is assumed the user has a working knowledge of mass spectrometry and high flow LC. The course is intended to help the new user set up the NanoLC instrument, design methods, run samples using the LC and troubleshoot common problems.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Fast Glycan Analysis for Biologics at SCIEX (1-day) View Course

Duration: 1 day
Language: German
Type: at SCIEX
Course Level: Intermediate

Product Number: 149848 Cost: Contact cesupport@sciex.com Location: Darmstadt, Germany

Description: This SCIEX University course is a comprehensive course covering sample preparation, PA 800 Plus instrument setup, data acquisition, and data analysis for glycan identification. You'll prepare a standard and your own samples using the SCIEX Fast Glycan Labeling and Analysis Kit. This course is provided in German.

It includes:
1 Day of instructor led training at a SCIEX Location by an Instructor with Applications expertise
Tuition for 1 Primary Learner to participate (does not include travel and living expenses)
Valid for 12 months from date of purchase
A course agenda can be viewed in the Resources section on the course page

CANCELLATION or RESCHEDULING POLICY

For cancellation/rescheduling, please contact us at least 2 weeks prior to the start of class.
We reserve the right to cancel a class until 3 weeks prior to the start date of the training class. If the class is cancelled, we will assist you in rescheduling.

TRAINING LOCATION ADDRESS

Landwehrstraße 54, 64293 Darmstadt, Germany

For any help regarding this training course, please contact cesupport@sciex.com

Front End Cleaning of SCIEX Triple Quadrupole and QTRAP® Systems View Course

Duration: 20 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This training module covers how to clean the front end components for SCIEX triple quadrupole and QTRAP mass spectrometer systems.
The following topics are covered during the course:

Overview of the front end components
Cleaning tips
System cleaning procedures for curtain and orifice plates, skimmer and ion guides.

Click on the "Resources" button on the left of the page for additional resources on "How to mimic a Divert Valve" and "Source/Gas Parameters and Settings".

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Front End Cleaning of SCIEX TripleTOF Systems View Course

Duration: 15 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This course will show you how to clean the front end components of your TripleTOF® System. It will demonstrate the following procedures:

Routine cleaning of the curtain and orifice plate without venting the system
Full cleaning of the QJet® ion guide, curtain and orifice plate by venting the system

Chapters:1
Certificate Type: Completion
PACE Accreditation: None

Gene Therapy CE Training - DNA/RNA Analysis at SCIEX (1-day) View Course

Duration: 1 day
Language: German
Type: at SCIEX
Course Level: Intermediate

Product Number: CETRN00001 Cost: Contact cesupport@sciex.com Location: Darmstadt, Germany

Description: This SCIEX University course uses theory and hands-on practice to cover DNA/RNA analysis. This course is provided in German.

It includes:
1 Day of instructor led training at a SCIEX Location by an Instructor with Applications expertise
Tuition for 1 Primary Learner to participate (does not include travel and living expenses)
Valid for 12 months from date of purchase
A course agenda can be viewed in the Resources section on the course page

CANCELLATION or RESCHEDULING POLICY

For cancellation/rescheduling, please contact us at least 2 weeks prior to the start of class.
We reserve the right to cancel a class until 3 weeks prior to the start date of the training class. If the class is cancelled, we will assist you in rescheduling.

TRAINING LOCATION ADDRESS

Landwehrstraße 54, 64293 Darmstadt, Germany

For any help regarding this training course, please contact cesupport@sciex.com

Gene Therapy CE Training - Virus Protein Analysis at SCIEX (1-day) View Course

Duration: 1 day
Language: German
Type: at SCIEX
Course Level: Intermediate

Product Number: CETRN00002 Cost: Contact cesupport@sciex.com Location: Darmstadt, Germany

Description: This SCIEX University course uses theory and hands-on practice to cover virus protein analysis. This course is provided in German.

It includes:
1 Day of instructor led training at a SCIEX Location by an Instructor with Applications expertise
Tuition for 1 Primary Learner to participate (does not include travel and living expenses)
Valid for 12 months from date of purchase
A course agenda can be viewed in the Resources section on the course page

CANCELLATION or RESCHEDULING POLICY

For cancellation/rescheduling, please contact us at least 2 weeks prior to the start of class.
We reserve the right to cancel a class until 3 weeks prior to the start date of the training class. If the class is cancelled, we will assist you in rescheduling.

TRAINING LOCATION ADDRESS

Landwehrstraße 54, 64293 Darmstadt, Germany

For any help regarding this training course, please contact cesupport@sciex.com

GenomeLab GeXP Applications Training and Troubleshooting at SCIEX (2-days) View Course

Duration: 2 days
Language: German,English
Type: at SCIEX
Course Level: Intermediate

Product Number: 608202 Cost: Contact cesupport@sciex.com Location: Darmstadt, Germany

Description: This SCIEX University course covers sequencing and fragment analysis applications using a CEQ-GeXP instrument. This course is available in English and German. The course includes hands-on laboratory exercises and covers the following applications:
- Sequencing - fragment analysis - gene expressions analysis. This course is provided in German.
- DNA sequencing
- DNA fragment analysis
- Gene expression studies by capillary electrophoresis
It covers how to successfully setup a reaction, data analysis and troubleshooting.

It includes:
2 Days of instructor led training at a SCIEX Location by an Instructor with Applications expertise
Tuition for 1 Primary Learner to participate (does not include travel and living expenses)
Valid for 12 months from date of purchase
A course agenda can be viewed in the Resources section on the course page

CANCELLATION or RESCHEDULING POLICY

For cancellation/rescheduling, please contact us at least 2 weeks prior to the start of class.
We reserve the right to cancel a class until 3 weeks prior to the start date of the training class. If the class is cancelled, we will assist you in rescheduling.

TRAINING LOCATION ADDRESS

Landwehrstraße 54, 64293 Darmstadt, Germany

For any help regarding this training course, please contact cesupport@sciex.com

Getting the Most Out of the Scheduled MRM Algorithm View Course

Duration: 20 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Advanced
Rating:

★★★★★

★★★★★

This course covers the theory of the Scheduled MRMalgorithm in Analyst and Analyst MD software, and how to create methods using the algorithm. It also covers enhancements to the algorithm in Analyst® software version 1.7.

After taking this course, you should be able to:

Understand how the Scheduled MRM algorithm works
Create a method using basic and advanced parameters
Describe some rules to follow when creating a method
Optimize your method using the sMRM Calculator script

Chapters:1
Certificate Type: Completion
PACE Accreditation: None

Giới thiệu phần mềm SCIEX OS (Introduction to SCIEX OS) View Course

Duration: 15 minutes
Language: Vietnamese
Type: Free Online, eLearning Course
Course Level: Basic

Khóa học eLearning này sẽ giới thiệu tổng quan về các chức năng trong SCIEX OS.

Sau khi hoàn thành khóa học này, bạn sẽ:
• Điều hướng thông qua SCIEX OS
• Hiểu chức năng chính của từng vùng làm việc trong SCIEX OS
• Thực hiện các tác vụ cơ bản trong từng không gian làm việc

Số chương: 1
Thời lượng: 15 phút
Trình độ người học: Cơ bản
Loại chứng chỉ: Hoàn thành
Chứng nhận PACE: Không

Giới thiệu về HPLC (Introduction to HPLC) View Course

Duration: 35 minutes
Language: Vietnamese
Type: Free Online, eLearning Course
Course Level: Basic

Khóa học này được thiết kế để giúp người dùng chưa quen với sắc ký lỏng hiểu những kiến thức cơ bản về HPLC. Khóa học bao gồm các chủ đề sau;
- Các thành phần cơ bản của hệ thống HPLC và chức năng của chúng
- Lý thuyết LC cơ bản cho các pha tĩnh và pha động khác nhau
- Các chế độ phân tách phổ biến và ứng dụng của chúng
- Độ phân giải trong sắc ký và cách thay đổi nó.

Những người học muốn đạt được chứng chỉ PACE và chứng nhận PACE để tham gia khóa học này (bằng 1 tín chỉ PACE) phải hoàn thành tốt mô-đun học tập và một bài khảo sát đánh giá trực tuyến ngắn gọn.

Số chương: 1
Thời lượng: khoảng 35 phút
Trình độ người học: Cơ bản
Loại chứng chỉ: Hoàn thành
Chứng nhận PACE: Có

Giới thiệu về Thời gian bay (Introduction to Time of Flight) View Course

Duration: 30 minutes
Language: Vietnamese
Type: Free Online, eLearning Course
Course Level: Basic

Khóa học này bao gồm lý thuyết và ứng dụng của khối phổ Thời gian bay. Sau khi hoàn thành khóa học, bạn sẽ có thể:
- xác định các ứng dụng và lợi ích của khối phổ Thời gian bay (TOF)
- giải thích các nguyên tắc của phép đo khối phổ TOF ở mức độ cao
- hiểu định nghĩa và ứng dụng của khối lượng chính xác

Số chương: 1
Thời lượng: 30 phút
Cấp độ khóa học: Cơ bản
Loại chứng chỉ: Hoàn thành
Công nhận PACE: Không

Giới thiệu về khối phổ (Introduction to Mass Spectrometry) View Course

Duration: 30 minutes
Language: Vietnamese
Type: Free Online, eLearning Course
Course Level: Basic

Buổi tự đào tạo này sẽ cung cấp những kiến thức cơ bản về khối phổ cho người mới dùng bao gồm việc sử dụng phổ khối, tạo ion, bộ phận phân tích khối và đầu dò. Những người học quan tâm đến việc có được chứng chỉ PACE và chứng nhận PACE để tham gia khóa học này (tương đương với 0,5 chứng chỉ PACE) phải hoàn thành mô-đun học tập và khảo sát đánh giá trực tuyến tóm tắt.

Chương: 1
Thời lượng: 33 minutes
Trình độ học viên: Basic
Loại chứng chỉ: Hoàn thành
PACE Công nhận: Đúng

Giới thiệu về sàng lọc hợp chất bằng LC-MS (Introduction to LC-MS Compound Screening) View Course

Duration: 30 minutes
Language: Vietnamese
Type: Free Online, eLearning Course
Course Level: Intermediate

Khóa học giới thiệu chủ đề dựa trên LC-MS để xác nhận sàng lọc hợp chất sử dụng công nghệ hệ thống QTRAP của hang AB SCIEX. Sau khi hoàn thành khóa học, người học sẽ có thể tạo ra một phương pháp chạy mẫu, tạo một lô chạy mẫu, xử lý dữ liệu và tạo một báo cáo.

Khóa học bao gồm các chủ đề sau:
- Giới thiệu về quy trình sàng lọc hợp chất
- Tổng quan về hệ thống LC-MS / MS
- Tổng quan về quy trình làm việc của thu nhận thông tin phụ thuộc (Information Dependent Acquisition / IDA)
- Cách xây dựng phương pháp MRM-IDA theo cách thủ công và sử dụng Trình hướng dẫn IDA
- Cách gửi một lô, xử lý dữ liệu và tạo báo cáo sàng lọc tổng hợp

Chương: 1
Thời lượng: 30 minutes
Trình độ học viên: Basic
Loại chứng chỉ: Hoàn thành
PACE Công nhận: Không

Guide de maintenance et de dépannage des systèmes SCIEX triple quadripôle et QTRAP (SCIEX Triple Quadrupole and QTRAP Systems Maintenance and Troubleshooting Guide) View Course

Duration: 30 minutes
Language: French
Type: Free Online, eLearning Course
Course Level: Intermediate

Ce cours est conçu pour présenter à l'utilisateur certains problèmes courants de maintenance et de dépannage pouvant survenir sur les systèmes SCIEX Triple Quadrupôle et QTRAP®. Il comprend les sujets suivants :
- Familiarisation avec le système de l'analyse des données MS, de la source d'ions et des sondes ESI et APCI
- Les dix problèmes les plus courants signalés à notre groupe d'assistance technique et de service
- Section des problèmes et de dépannage détaillant les problèmes les plus courants liés au signal, à l'ordinateur et à la communication et comment les résoudre
- La maintenance englobe les tâches de maintenance recommandées et les meilleures pratiques

Chapitres : 1
Durée: 30 minutes
Niveau d'apprentissage : Intermédiaire
Type de certificat: Achèvement
Accréditation PACE: Aucun

Guía de mantenimiento y resolución de problemas de los sistemas SCIEX de triple cuadrupolo y QTRAP (SCIEX Triple Quadrupole and QTRAP Systems Maintenance and Troubleshooting Guide) View Course

Duration: 30 mins
Language: Spanish
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

Este curso está diseñado para presentar al usuario algunos problemas comunes de mantenimiento y de diagnóstico de problemas que pueden ocurrir en los sistemas SCIEX Triple Quadrupole y QTRAP®. Los siguientes temas serán tratados:

Familiarización del sistema de análisis de datos MS, la fuente de iones, y las sondas ESI y APCI
Los diez problemas más comunes reportados a nuestro grupo de Servicio y de Soporte Técnico
Sección de problemas y diagnostico que detalla los problemas más comunes relacionados con la señal, la computadora y la comunicación, y cómo solucionarlos
El mantenimiento trata de las tareas de mantenimiento recomendadas y las mejores prácticas.

Tipo de certificado: Finalización
Acreditación PACE: No

HPLC串联质谱: 流动相准备与LC泵的概述(HPLC Tandem MS: Mobile Phase Preparation & LC Pumps Overview) View Course

Duration: 20 minutes
Language: Chinese
Type: Free Online, eLearning Course
Course Level: Basic

本培训主要讲解使用高效液相色谱(HPLC)系统进行质谱分析应用中的流动相准备和液相泵设置相关的基础知识。简要概述了高效液相色谱系统的组成，包括清洗LC泵的常规要点。特别强调了试剂和测量设备的正确使用。在本培训的最后附有一个简短的测验。

持续时间: 约10分钟

High-Resolution MRM (MRMHR) Workflow Using SCIEX QTOF and ZenoTOF Systems View Course

Duration: 25 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

The course introduces the high-resolution MRM workflow using SCIEX QTOF and ZenoTOF Systems with SCIEX OS. This is an advanced workflow course, and it is recommended that you complete the LC-MS/MS Operation Series for the X500R QTOF system eLearning course before taking this course. Upon completion of the course, learners will be able to build an optimized MS method, submit a batch and process data.

The course covers the following topics:

Guided MRM HR compound optimization
TOF MSMS method editor
Build a batch and run scheduled MRM HR
Process data using the quantitation, and quantitation and targeted identification workflows

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Hướng dẫn bảo trì bảo dưỡng và khắc phục sự cố trên hệ thống ba tứ cực và QTRAP của hang SCIEX View Course

Duration: 30 mins
Language: Vietnamese
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

Khóa học này được thiết kế để giới thiệu cho người dùng một số bảo trì và khắc phục sự cố phổ biến thông thường có thể xảy ra trên các hệ thống khối phổ ba tứ cực và QTRAP. Nó bao gồm các chủ đề sau:
- Làm quen với phân tích dữ liệu hệ thống MS, nguồn ion hóa và đầu dò ESI và APCI
- Mười vấn đề phổ biến nhất đã được báo cáo cho nhóm Dịch vụ và Hỗ trợ Kỹ thuật của chúng tôi
- Chi tiết về một số sự cố và cách khắc phục sự cố phổ biến nhất liên quan đến tín hiệu, máy tính và lỗi liên quan đến kết nối và cách khắc phục
- Bảo trì vượt qua các nhiệm vụ bảo trì được đề xuất và cách thực hành tốt nhất.

Chương: 1
Thời lượng: 30 minutes
Trình độ học viên: Basic
Loại chứng chỉ: Hoàn thành
PACE Công nhận: Không

Hệ thống SCIEX Triple Quad 7500 LC-MS/MS - Tổng quan về công nghệ QTRAP (SCIEX Triple Quad 7500 LC-MS/MS System – QTRAP Ready Technology Overview) View Course

Duration: 10 minutes
Language: Vietnamese
Type: Free Online, eLearning Course
Course Level: Basic

Khóa học này là tổng quan về công nghệ và tính năng mới được sử dụng trong Hệ thống SCIEX Triple Quad 7500 LC-MS/MS - QTRAP ready. Nó bao gồm các chủ đề sau:
- Chức năng QTRAP ready
- Nguồn Ion OptiFlow Pro
- Công nghệ E Lens
- Dẫn hướng ion D Jet
- Các tính năng và lợi ích của công nghệ mới

Loại chứng chỉ: Hoàn thành
Chứng nhận PACE: Không

IDA method creation using SCIEX QTRAP® systems View Course

Duration: 40 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Advanced
Rating:

★★★★★

★★★★★

The purpose of this presentation is to introduce novice users of SCIEX QTRAP® instruments to the subject of linear ion trap method creation. It is intended to introduce topics which the user might need to be aware of during method development.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

IgG Purity and Heterogeneity Assay View Course

Duration: 30 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This course is an overview of quantitative protein purity analysis using SDS-Gel Capillary Electrophoresis. It covers the theory of the application, separation, and sample analysis using the CE-SDS MW Kit and IgG Purity and Heterogeneity Assay Kit, and finally interpretation of the results.

After taking this course, you should be able to:

Understand the theory of the application and the separation
Perform sample analysis using the IgG Purity and Heterogeneity Assay Kit
Interpret results obtained using the PA 800 Plus System

Chapters:1
Certificate Type: Completion
PACE Accreditation: None

Installing the OptiFlow Interface on TripleTOF Systems View Course

Duration: 4 mins
Language: English
Type: Premium, How-to Videos
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This eLearning course will demonstrate how to remove the OptiFlow™ interface from your TripleTOF® system and switch between nanoflow and microflow or high flow.

After completing this course, you should be able to:

Remove the nano ion source and install a high or microflow ion source
Remove the OptiFlow interface and install the high flow curtain plate
Install the microflow electrode in the probe for the Turbo V™ ion source

Chapters: 1
Certificate Type: None
PACE Accreditation: No

Intact Biologics Analysis Using SCIEX X500B QTOF System and BioPharmaView Software View Course

Duration: 30 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

In this course, we introduce the SCIEX X500B QTOF System and BioPharmaView software, and demonstrate the workflow for Intact Biologics analysis.

After taking this course, you should be able to:

Understand the basics of Intact Biologics analysis
Be familiar with the hardware and software features
Create LC and MS methods to acquire data in SCIEX OS
Submit a batch
Process Intact Biologics data using BioPharmaView software

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Introducción a la HPLC (Introduction to HPLC) View Course

Duration: 35 minutes
Language: Spanish
Type: Free Online, eLearning Course
Course Level: Basic

Este curso está diseñado para ayudar a los usuarios que no están familiarizados con la Cromatografía Líquida a entender los fundamentos de la HPLC. El curso cubre los siguientes temas:

Componentes básicos del sistema HPLC y sus funciones
Teoría básica de LC para diferentes fases estacionarias y móviles
Modos de separación comunes y sus aplicaciones
Resolución en la cromatografía y cómo se puede alterar

Los alumnos interesados en obtener un certificado PACE y una acreditación PACE por realizar este curso (equivalente a un (1) crédito PACE) deben completar con éxito el módulo de aprendizaje y una breve encuesta de evaluación online.

Tipo de certificado: Finalización
Acreditación PACE: Sí

Introducción a la espectrometría de masas (Introduction to Mass Spectrometry) View Course

Duration: 30 minutes
Language: Spanish
Type: Free Online, eLearning Course
Course Level: Basic

En esta sesión de formación a su ritmo se cubren los fundamentos de la espectrometría de masas para nuevos usuarios, incluyendo: usos de la espectrometría de masas, formación de iones, analizadores de masas y detectores. Los alumnos interesados en obtener un certificado PACE y una acreditación PACE por realizar este curso (equivalente a 0,5 créditos PACE) deben completar con éxito el módulo de aprendizaje y una breve encuesta de evaluación en línea.

Tipo de certificado: Finalización
Acreditación PACE: Sí

Introducción al búsqueda de compuestos por LC-MS (Introduction to LC-MS Compound Screening) View Course

Duration: 30 mins
Language: Spanish
Type: Free Online, eLearning Course
Course Level: Intermediate

El curso introduce el tema de búsqueda de compuestos de confirmación basado en LC-MS utilizando la tecnología de los sistemas QTRAP de SCIEX. Al finalizar el curso, los alumnos serán capaces de crear un método de adquisición, enviar una secuencia, procesar datos y crear un informe.

El curso cubre los siguientes temas

Introducción al proceso de búsqueda de compuestos
Visión general de un sistema LC-MS/MS
Visión general del flujo de trabajo de adquisición dependiente de la información (IDA)
Cómo construir un método de adquisición MRM-IDA manualmente y utilizando el asistente IDA
Cómo enviar un lote, procesar los datos y crear un informe de cribado de compuestos

Tipo de certificado: Completion
Acreditación PACE: No

Introducción al triple cuadrupolo y LIT MS (Introduction to Triple Quadrupole and LIT MS) View Course

Duration: 40 minutes
Language: Spanish
Type: Free Online, eLearning Course
Course Level: Basic

Esta sesión de capacitación proporcionará una introducción a la teoría de triple cuadrupolo, trampa de iones lineal, escaneos y operaciones en espectrómetros de masas SCIEX. Los participantes que estén interesadas en obtener un certificado PACE y una acreditación PACE (equivalente a un (1) crédito PACE) deberán completar con éxito el módulo de aprendizaje y una breve encuesta de evaluación en línea.

Tipo de certificado: Finalización
Acreditación PACE: Si

Introduction au Triple Quadrupôle et LIT MS (Introduction to Triple Quad and LIT MS) View Course

Duration: 40 minutes
Language: French
Type: Free Online, eLearning Course
Course Level: Basic

Ce cours fournira une introduction à la théorie des pièges à ions triples quadripolaires et linéaires, aux balayages et au fonctionnement des spectromètres de masse SCIEX. Les participants intéressés à obtenir un certificat PACE et une accréditation PACE pour suivre ce cours (égal à un (1) crédit PACE) doivent réussir le module d'apprentissage et une brève évaluation des connaissances en ligne.

Chapitres : 1
Durée: 40 minutes
Niveau d'apprentissage : Basique
Type de certificat: Achèvement
Accréditation PACE: Oui

Introduction au criblage de composés LC-MS (Introduction to LC-MS Compound Screening) View Course

Duration: 30 minutes
Language: French
Type: Free Online, eLearning Course
Course Level: Intermediate

Le cours présente le sujet du criblage des composés de confirmation basé sur la LC-MS utilisant la technologie des systèmes SCIEX QTRAP®. À la fin du cours, vous serez capables de créer une méthode d'acquisition, de soumettre un lot, de traiter des données et de créer un rapport.

Le cours couvre les sujets suivants :

Introduction au processus de criblage des composés
Présentation d'un système LC-MS/MS
Vue d'ensemble du flux de travail de l'acquisition dépendante de l'information (IDA)
Comment construire une méthode d'acquisition MRM-IDA manuellement et à l'aide de l'assistant IDA
Comment soumettre un lot, traiter les données et créer un rapport de criblage des composés

Chapitres : 1
Type de certificat : Achèvement
Accréditation PACE : Aucune

Introduction of SWATH™ Acquisition and SWATH™ 2.0 Data Processing View Course

Duration: 30 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

After taking this training course, the user should be able to:

Understand the SWATH™ workflow;
Generate ion libraries from discovery data;
Utilize the SWATH™ 2.0 MicroApp for comprehensive XIC generation;
Utilize the SWATH™ 2.0 MicroApp for data export for further statistical analysis.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Introduction to Analyst TF Software View Course

Duration: 20 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Basic
Rating:

★★★★★

★★★★★

This course will introduce you to the Analyst® TF Software and give you an overview of the software and its functionality.

After taking this course, you should be able to:

Create a hardware profile
Perform Instrument Optimization
Understand MS/MS^ALL with SWATH^TMAcquisition, IDA and MRM ^HR scan types
Create methods using the Method Wizard
Create TOF MS and IDA methods
Create and submit batches
Explore your data

Chapters:1

Certificate Type: Completion

PACE Accreditation: None

Introduction to Analyst® Reporter 3.2 View Course

Duration: 20 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

Following the completion of this course, you will be able to explain how tags are used in Analyst Software Reporter 3.2, add and modify Text Tags to templates, add and modify Picture Tags to templates, explain how For Each Loops are used, and modify IF tags to flag results.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Introduction to Antibodies and Antibody-Drug Conjugates View Course

Duration: 20 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This course covers the theory of antibodies and antibody-drug conjugates.

After taking this training course, the user should be able to:

Identify the major structural components of antibodies as well as their endogenous function
Understand the basic interaction between antibodies and their epitopes on antigens
Identify antibody isotypes, IgG subclasses, and identify the difference between monoclonal and polyclonal antibodies
Understand the basis for mAb therapeutics and different types of fusion and chimeric proteins
Understand the different types of anti-drug antibody responses to therapeutic mAbs
Identify components of an antibody drug conjugate and various conjugation techniques and their effect on drug to antibody ratios
Explain potential differences in data acquired from ligand binding assays and LC/MS assays.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Introduction to ChemoView™ 2.0 Software Data Processing View Course

Duration: 20 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This self-paced, online training will demonstrate the workflow of ChemoView™ 2.0 Software data processing of MS/MS data acquired from SCIEX API and QTRAP® System instruments. Users will learn how to define analyte types and sample types; define Tests and Analytes; define processing methods and review reports.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Introduction to Cliquid® Software 3.3 View Course

Duration: 30 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This elearning course will cover:

How to use the Cliquid® Software to acquire and process data
How to create new tests or modify existing tests as an administrator
How to install purchased iMethods™ as an administrator
How to process screening data and create a report

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Introduction to HPLC View Course

Duration: 40 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Basic
Rating:

★★★★★

★★★★★

This course is designed to help users who are unfamiliar with Liquid Chromatography to understand the basics of HPLC. The course covers the following topics;
- Basic HPLC system components and their functions
- Basic LC theory for different stationary and mobile phases
- Common separation modes and their applications
- Resolution in chromatography and how it can be altered

Learners interested in obtaining a PACE certificate and PACE accreditation for taking this course (equal to one (1) PACE credit) must successfully complete the learning module and a brief online evaluation survey.

Chapters: 1
Certificate Type: Completion
PACE accreditation: Yes

Introduction to LC-MS Compound Screening View Course

Duration: 30 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

The course introduces the subject of LC-MS based confirmation compound screening utilizing SCIEX QTRAP® Systems Technology. Upon completion of the course, learners will be able to create an acquisition method, submit a batch, process data, and create a report.

The course covers the following topics:

Introduction to the Compound Screening process
Overview of an LC-MS/MS system
Overview of the Information Dependent Acquisition (IDA) workflow
How to build an MRM-IDA acquisition method manually and using the IDA Wizard
How to submit a batch, process data and creating a compound screening report

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Introduction to LC-MS/MS Operation Series for SCIEX IVD Triple Quadrupole and QTRAP Systems View Course

Duration: 60 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Basic
Rating:

★★★★★

★★★★★

This eLearning series is designed to teach a user how to use the SCIEX IVD triple quadrupole and QTRAP® systems for a basic quantitative workflow. It consists of four modules: Safety and Lab Requirements, Preparation, Optimization and Data Acquisition, and Data Processing.

Safety and Lab Requirements, and Preparation cover appropriate laboratory safety procedures, how to prepare the system, mobile phases, and samples.
Optimization and Data Acquisition covers compound and source optimization to create an acquisition method, and how to acquire data.
Data Processing details how to create a processing method, process and review data, and generate a report using MultiQuant^TM MD software.

If required, you can find example data to use as practice for data processing in the Resources section on the left side.

Chapters: Four (4)
Certificate Type: Completion
PACE Accreditation: No

Introduction to LC-MS/MS Operation Series for SCIEX Triple Quadrupole and QTRAP Systems View Course

Duration: 60 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Basic
Rating:

★★★★★

★★★★★

This eLearning series is designed to teach a user how to use the SCIEX triple quadrupole and QTRAP® systems (RUO systems only) for a basic quantitative workflow. It consists of four modules: Safety and Lab Requirements, Mobile Phase and Standards Preparation, Optimization and Data Acquisition, and Data Analysis.
Safety and Lab Requirements, and Mobile Phase and Standards Preparation cover appropriate laboratory safety procedures, how to prepare the system, mobile phases, and samples;
Optimization and Data Acquisition covers compound and source optimization to create an acquisition method, and how to acquire data;
Data Analysis shows you how to create a processing method, process and review data, and generate a report using MultiQuant or SCIEX OS-MQ software

If required, you can find example data to use as practice for data processing in the Resources section on the left side;

Chapters: Four (4)
Certificate Type: Completion
PACE Accreditation: No

Introduction to LC-MS/MS Operation Series for SCIEX TripleTOF Systems View Course

Duration: 60 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Basic
Rating:

★★★★★

★★★★★

This course covers the basics of how to use the SCIEX TripleTOF®Systems, and is comprised of four modules: Safety and Lab Requirements, Preparation, Optimization, and Data Analysis.

Safety and Lab Requirements, and Preparation cover appropriate laboratory safety procedures, how to prepare the system, mobile phases, and samples.
Optimization and Data Acquisition covers how to tune and calibrate the SCIEX TripleTOF system, build methods and create/submit batches.
Data Analysis details how to review TOF MS, Product Ion and IDA data using Analyst® TF, PeakView^TM and SCIEX OS software.

If required, you can find example data to use as practice for data processing in the Resources section on the left side.

Chapters: Four (4)
Certificate Type: Completion
PACE Accreditation: No

Introduction to LC-MS/MS Operation Series for the Topaz System View Course

Duration: 60 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Basic
Rating:

★★★★★

★★★★★

This eLearning series is designed to teach a user how to use the Topaz^TMSystem and ClearCore^TM MD software for a basic quantitative workflow. It consists of four modules: Safety and Lab Requirements, Preparation, Optimization and Data Analysis.

Safety and Lab Requirements, and Preparation cover appropriate laboratory safety procedures, how to prepare the system, mobile phases, and samples.
Optimization covers compound and source optimization to create LC and MS methods, and how to acquire data.
Data Analysis details how to create a processing method, process and review data, and generate a report.

If required, you can find example data to use as practice for data processing in the Resources section on the left side.

Chapters: Four (4)
Certificate Type: Completion
PACE Accreditation: No

Introduction to LC-MS/MS operation series for the SCIEX QTOF and ZenoTOF systems View Course

Duration: 60 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Basic
Rating:

★★★★★

★★★★★

This course covers the basics of how to use the ZenoTOF 7600, X500R and X500B QTOF systems with the SCIEX OS software, and is comprised of four modules: Safety and Lab Requirements, Mobile Phase and Standards Preparation, Optimization, and Data Analysis.

Safety and Lab Requirements, and Mobile Phase and Standards Preparation cover appropriate laboratory safety procedures, how to prepare the system, mobile phases, and samples;
LC-MS/MS covers tuning and calibration of the mass spectrometer, creation of acquisition methods, and creation and submission of batches.
Data Analysis shows you how to process and review TOF MS and IDA data

If required, you can find example data to use as practice for data processing in the Resources section on the left side;

Chapters: Four (4)
Certificate Type: Completion
PACE Accreditation: No

Introduction to Mass Spectrometry View Course

Duration: 40 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Basic
Rating:

★★★★★

★★★★★

This self-paced training session covers the basics of mass spectrometry for new users including the uses of mass spectrometry, ion formation, mass analyzers and detectors. Learners interested in obtaining a PACE certificate and PACE accreditation for taking this course (equal to 0.5 PACE credit) must successfully complete the learning module and a brief online evaluation survey.

Certificate Type: Completion
Pace Accreditation: Yes

Introduction to MetabolitePilot™ Software View Course

Duration: 30 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This is a general overview of the MetabolitePilot™ Software and its functionality, including use of the Compound Library, working with Biotransformations, setting up Processing Parameters, creating a Processing Batch in the Batch Workspace, reviewing the Results Workspace – including an overview of the Interpretation feature, and comparing data in the Correlation Workspace. Report generation and troubleshooting is also addressed.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Introduction to MicroLC View Course

Duration: 10 mins
Language: English
Type: Free Online, eLearning Course
Course Level: Basic
Rating:

★★★★★

★★★★★

This course is an introduction to microLC, and covers the following topics:

Theory and benefits of microLC such as sampling efficiency, sensitivity improvements and solvent savings
Modifying your method for microLC such as gradient conditions to use, appropriate injection volumes, how a trap and elute workflow can be beneficial, and best practices to achieve optimal robustness
System requirements including the pump requirements, and appropriate tubing and electrospray emitter IDs

Chapters: 1
Certificate Type: Completion
PACE Accreditation: None

Introduction to PeakView® Software and its Use in Met ID Data Processing View Course

Duration: 20 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

After taking this training course, you will be able to perform basic operations in PeakView® Software and use some of the more advanced functions such as FormulaFinder and Fragment Pane for the Met ID workflow.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Introduction to SCIEX OS View Course

Duration: 15 mins
Language: English
Type: Free Online, eLearning Course
Course Level: Basic
Rating:

★★★★★

★★★★★

This introductory eLearning course will give an overview of the functionality in SCIEX OS.

After completing this course, you should be:

Comfortable navigating through SCIEX OS
Understand the main function of each workspace in SCIEX OS
Perform basic tasks in each workspace

Chapters: 1
Certificate Type: Completion
PACE Accreditation: None

Introduction to SelexION® Differential Mobility Separation Technology View Course

Duration: 25 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate

This course is intended to cover the theory of Differential Mobility Separation (DMS) Technology and how to use the SelexION® device with your mass spectrometer.

After taking this course, you should be able to:

Understand the theory of DMS and DMS method parameters
Install the SelexION device and equilibrate the system before use
Optimize DMS method parameters for your analytes
Perform basic maintenance tasks

Refer to the Resources section on the left to view additional documents:

Workflows for Method Development and Routine use
Cleaning Procedures
Installation and Removal Procedures

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Introduction to Time Of Flight View Course

Duration: 40 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Basic
Rating:

★★★★★

★★★★★

This course covers the theory and application of Time Of Flight mass spectrometry. Upon completion of the course, you will be able to:

identify applications and benefits of Time of Flight (TOF) mass spectrometry
explain the principles of TOF mass spectrometry at a high level
understand the definition and application of accurate mass

Chapters: One (1)
Certificate Type: Completion
PACE Accreditation: No

Introduction to Triple Quadrupole and LIT MS View Course

Duration: 40 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Basic
Rating:

★★★★★

★★★★★

This course will provide an introduction to triple quadrupole and linear ion trap theory, scans and operation on SCIEX mass spectrometers. Learners interested in obtaining a PACE certificate and PACE accreditation for taking this course (equal to one (1) PACE credit) must successfully complete the learning module and a brief online evaluation survey.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: Yes

Introduction to the Echo® MS System View Course

Duration: 15 mins
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This eLearning course will give an overview of the Echo® MS System. It will cover the following topics:

Components and theory of the Echo MS System
How to configure the Echo MS System using SCIEX OS
Creating MS, AE and processing methods and batches
Using Direct Device Control
Maintenance tasks

Chapters: 1
Certificate Type: Completion
PACE Accreditation: None

Introduction to the Jasper HPLC System View Course

Duration: 30minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This training session will provide an overview of the Jasper^TM HPLC system and how to use the system for sample analysis.
After taking this course, you should be able to:

Understand the components of the Jasper HPLC System
Describe the LC flow path through the LC system
Acquire data for samples
Perform system tasks before and after acquisition

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Introduction to the Lipidyzer Platform View Course

Duration: 20 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This module will inform you on the basic components and the workflow of the Lipidyzer^TM Platform.

After taking this training course, you should be able to:

Understand the design of the Lipidyzer Platform
Have an understanding of the Lipidyzer Workflow
Know the consumables needed to perform a direct infusion
Have an understanding of the Lipidomics Workflow Software and its User Interface

Chapters: One (1)
Certificate Type: Completion
PACE Accreditation: No

Introduction to the Operation Series for the Echo MS System View Course

Duration: 65 mins
Language: English
Type: Free Online, eLearning Course
Course Level: Basic
Rating:

★★★★★

★★★★★

This eLearning series is designed to teach you how to use the Echo MS® systems for a basic quantitative workflow. It consists of four modules: Safety and Lab Requirements, Mobile Phase and Standards Preparation, Data Acquisition, and Data Analysis.

Safety and Lab Requirements, and Mobile Phase and Standards Preparation cover appropriate laboratory safety procedures, how to prepare the system, mobile phases, and samples.
Data Acquisition covers creation of MS and AE methods and and how to acquire data.
Data Analysis shows you how to create a processing method, process and review data, generate a report and perform auto-triggered data processing.

If required, you can find example data to use as practice for data processing in the Resources section on the left side.

Chapters: Four (4)
Certificate Type: Completion
PACE Accreditation: No

Introduction to the OptiFlow Quant Solution for MicroLC View Course

Duration: 25 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This eLearning series covers the OptiFlow Quant Solution for MicroLC. It applies to selected triple quadrupole, QTRAP® and TripleTOF® systems coupled with an OptiFlow® Turbo V ion source and the M5 MicroLC system. The series consists of a two part course:

System Overview
System Setup and Use

After completing this course, you should be able to:

Describe the different components in the OptiFlow Quant Solution
Setup and use the OptiFlow Turbo V ion source
Setup the system for the M5 MicroLC system
Describe the trap-elute workflow
Define mobile phases, purge and flush the M5 MicroLC system
Create autosampler methods using the Analyst Device Driver
Create acquisition methods for direct injection and trap-elute experiments
Understand best practices and maintenance of the M5 MicroLC system

Chapters: 2
Certificate Type: Completion
PACE Accreditation: None

Introduction to the Topaz System View Course

Duration: 25 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This eLearning course will provide an overview of the Topaz^TM System and explain the theory of various scan types.
After taking this course, you should be able to:

Understand the components of the Topaz System
Describe the LC flow path through the LC system in all modes
Explain how ions travel through the mass spectrometer
Discuss the theory for MS and MS/MS scans

Chapters: One
Certificate Type: Completion
PACE Accreditation: No

Introduction à la HPLC (Introduction to HPLC) View Course

Duration: 40 minutes
Language: French
Type: Free Online, eLearning Course
Course Level: Basic

Ce cours est conçu pour aider les utilisateurs qui ne sont pas familiarisés avec la chromatographie liquide à comprendre les bases de la HPLC. Le cours couvre les sujets suivants ;
- Composants du système HPLC de base et leurs fonctions
- Théorie de base de la LC pour différentes phases stationnaires et mobiles
- Modes de séparation communs et leurs applications
- Résolution en chromatographie et comment elle peut être modifiée

Les participants intéressés à obtenir un certificat PACE et une accréditation PACE pour suivre ce cours (égal à un (1) crédit PACE) doivent réussir le module d'apprentissage et une brève évaluation des connaissances en ligne.

Chapitres : 1
Durée: 40 minutes
Niveau d'apprentissage : Basique
Type de certificat: Achèvement
Accréditation PACE: Oui

Introduction à la spectrométrie de masse (Introduction to Mass Spectrometry) View Course

Duration: 33 minutes
Language: French
Type: Free Online, eLearning Course
Course Level: Basic

Cette session d'auto-formation couvre les bases de la spectrométrie de masse pour les nouveaux utilisateurs, y compris les utilisations de la spectrométrie de masse, la formation d'ions, les analyseurs de masse et les détecteurs. Les participants intéressés à obtenir un certificat PACE et une accréditation PACE pour suivre ce cours (égal à 0,5 crédit PACE) doivent réussir le module d'apprentissage et une brève évaluation des connaissances en ligne.

Chapitres : 1
Durée: 33 minutes
Niveau d'apprentissage : Basique
Type de certificat: Achèvement
Accréditation PACE: Oui

Ionization Techniques for SCIEX Sources View Course

Duration: 15 mins
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This course will introduce you to the different ionization techniques that can be performed using SCIEX ion sources, and important source and gas parameters for each ion source. A guide on optimizing the source parameters for the OptiFlow® Pro Ion Source can be accessed in the Resources tab at the top of the course page.

The course covers the following topics:

ESI, APCI and APPI ionization
Turbo V^TM, IonDrive^TM Turbo V, PhotoSpray®, DuoSpray^TM OptiFlow^® Turbo V sources, and the OptiFlow® Pro Ion Source
Important source parameters

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Jasper HPLC 系统入门 View Course

Duration: 30minutes
Language: Chinese
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

本培训课程将对Jasper HPLC系统做出概要介绍，并讲解如何使用该系统进行样品分析。

在学过本课程之后，你将能够：
- 认识Jasper HPLC系统的各单元

- 描述LC系统的流路
- 进行样品数据采集
- 并将能进行采集前的准备和采集后的收尾工作

章节：1
时长：30min
课程级别：基础
证书类型：Completion
PACE认证：否

Jasper HPLC 系统维护系列视频 View Course

Duration: 5 minutes
Language: Chinese
Type: Premium, How-to Videos
Course Level: Advanced
Rating:

★★★★★

★★★★★

本系列短视频是Jasper^TM HPLC 系统的维护演示，介绍了如何进行系列简单的仪器维护工作。

清洁柱温箱中的漏液
清洁泵漏液盘
拆卸自动进样器透明丙烯板
对进样口的清洁维护
冲洗进样针和定量环
去除冷凝水
更换保险丝
清洗单向阀
更换进样针密封垫
更换定量环

证书类型：无
PACE认证：无

LC-MS/MS 操作教程- SCIEX IVD 三重四极杆/QTRAP 系统 (Introduction to LC-MS/MS Operation Series for SCIEX IVD Systems ) View Course

Duration: 60 minutes
Language: Chinese
Type: Free Online, eLearning Course
Course Level: Basic
Rating:

★★★★★

★★★★★

在线学习系列课程为适用于SCIEX IVD 三重四极杆和QTRAP 的LC-MS/MS操作培训，包含四个单元：实验室安全须知、实验准备、方法优化、数据处理。在完成本系列课程之后，参与者将了解实验室安全规程，以及如何准备系统、流动相和样品，还将能够学会采集数据、浏览数据及使用MultiQuant MD软件生成报告。

单元数：4
时长：每单元20min
课程级别：基础
证书类型：Completion
PACE认证：否
Course ID: e57f9489-23bd-4c4f-8641-befa9153fc8c

LC-MS/MS 操作教程- SCIEX TripleTOF系统 View Course

Duration: 60 minutes
Language: Chinese
Type: Free Online, eLearning Course
Course Level: Basic
Rating:

★★★★★

★★★★★

本系列课程主要讲解SCIEX TripleTOF®系统的基础操作知识，共包含四个单元：实验室安全须知、实验准备、LC-MS/MS方法和数据处理。
实验室安全须知和实验准备单元包括适当的实验室安全程序，如何准备系统、流动相和样品。

LC-MS/MS方法单元包括如何调谐和校准SCIEX TripleTOF系统、构建方法和创建/提交样本批次。

数据处理单元详细介绍了如何使用Analyst®TF、PeakViewTM和SCIEX OS软件查看TOF MS数据、子离子数据和IDA数据。

课件屏幕左上角的资源文件夹中有可供数据处理操作参考的样本数据。

单元数：4
证书类别： Completion
PACE 认证：No

LC-MS/MS 操作教程- X-系列 QTOF 系统 View Course

Duration: 80 minutes
Language: Chinese
Type: Free Online, eLearning Course
Course Level: Basic
Rating:

★★★★★

★★★★★

本培训系列主要内容为如何使用配备SCIEX OS 软件的X500R QTOF系统，课程包含四个单元：实验室安全须知、实验准备、LC-MS/MS分析方法和数据处理。完成课程后，学员将了解正确的安全防护、知道如何准备系统、流动相和样品。学员也将能够对X-系列 QTOF系统进行调谐和校准，并会建立方法和新建批次。最后的部分为如何查看TOF MS 和IDA数据。

单元：4
学习时长:20min/单元
课程级别：基础
PACE Accreditation: No

LC-MS/MS 화합물 스크리닝 소개 View Course

Duration: 30 minutes
Language: Korean
Type: Free Online, eLearning Course
Course Level: Intermediate

이 과정은 AB SCIEX QTRAP® 시스템 기술을 활용하여 LC-MS 기반 확인 화합물 스크리닝을 소개합니다. 이 과정을 이수하면 수집 방법을 만들고 배치를 제출하고 데이터를 처리하며 보고서를 만들 수 있습니다.

이 과정은 다음 주제로 구성되어 있습니다.
- 화합물 스크리닝 프로세스 소개
- LC-MS/MS 시스템 개요
- IDA (Information Dependent Acquisition) 워크플로우 개요
- 수동으로 MRM-IDA 수집 방법 구축 및 IDA 마법사 사용 방법
- 배치 제출, 데이터 처리 및 화합물 스크리닝 보고서 생성 방법

장: 1
기간: 25~30 분
학습자 수준: 기초
인증 유형: 완료
PACE 승인: 없음

LC-MS/MS操作教程 - SCIEX 三重四极杆/QTRAP View Course

Duration: 60 minutes
Language: Chinese
Type: Free Online, eLearning Course
Course Level: Basic
Rating:

★★★★★

★★★★★

本在线学习系列课程为适用于SCIEX三重四极杆和QTRAP 的LC-MS/MS操作培训，包含四个单元：实验室安全须知、试验准备、优化与LC-MS/MS方法、数据处理。在完成本系列课程之后，参与者将了解实验室安全规程，以及如何准备系统、流动相和样品，还将能够优化方法、提交批次和使用MultiQuant软件生成结果列表与绘制标准曲线。

单元数：4
时长：每单元20min
课程级别：基础
证书类型：Completion
PACE认证：否

LC-MSによる化合物スクリーニング入門（Introduction to LC-MS Compound Screening） View Course

Duration: 30 mins
Language: Japanese
Type: Free Online, eLearning Course
Course Level: Intermediate

このコースでは、 SCIEX QTRAP^®システムテクノロジーを利用した LC-MS ベースの化合物同定スクリーニングについてご紹介します。このコースを修了すると、Acquisition Methodの作成、BatchのSubmit、データ解析、レポートの作成ができるようになります。

このコースでは、以下の内容をご紹介します。：
- LC-MSによる化合物同定スクリーニングのプロセスについて
- LC-MS/MS システムの概要
- IDA(Information Dependent Acquisition) ワークフローの概要
- 手動およびIDA Method Wizard によるMRM-IDA Acquisition Methodの作成方法
- BatchのSubmit方法、データ解析について、化合物スクリーニングレポートの作成方法

チャプター数：1
所要時間：30分
学習レベル:中級
コース修了認定証：有り
P.A.C.E. 認定対象: 対象外

LC-MS化合物筛查入门 View Course

Duration: 30 minutes
Language: Chinese
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

本课程讲解了使用SCIEX QTRAP 系统进行的以LC-MS为基础的确证化合物筛查技术。学员能够通过课程学习到如何新建筛查采集方法、提交批次、进行数据处理和新建报告。

课程内容涵盖以下章节：
- 化合物筛查流程介绍
- LC-MS/MS 系统简介
- 信息依赖性采集（IDA）工作流程介绍
- 如何通过手动和IDA向导新建MRM-IDA 采集方法
-如何提交批次、处理数据和新建化合物筛查报告

模块分节：1
证书类型： Completion
PACE 认证：No

Le système LC-MS/MS SCIEX Triple Quad 7500– Présentation de la technologie QTRAP Ready (SCIEX Triple Quad 7500 LC-MS/MS System – QTRAP Ready Technology Overview) View Course

Duration: 10 mins
Language: French
Type: Free Online, eLearning Course
Course Level: Basic

Ce cours est un aperçu des nouvelles technologies et fonctionnalités utilisées dans le système SCIEX Triple Quad 7500 LC-MS/MS - QTRAP Ready. Il couvre les sujets suivants :

Fonctionnalité QTRAP Ready
Source d'ions OptiFlow Pro
Technologie E Lens
Guide d'ions D Jet
Les caractéristiques et avantages de la nouvelle technologie

Type de certificat : Achèvement
Accréditation PACE : Aucune

LightSight® 2.2 Software for Metabolite Identification View Course

Duration: 20 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This self-paced, online training session is designed to introduce current Linear Ion Trap instrument users to LightSight® 2.2 software. Functionality improvements including analog data analysis will be covered. Additionally, the training session will cover how to generate acquisition methods as well as process data. Lastly, the training session will go over how to generate and submit MS/MS methods and basic reporting functionality.

Chapters: 1
Certificate Type: None
PACE Accreditation: No

Lightsight 软件应用培训(2天) View Course

Language: Chinese
Type: at SCIEX
Course Level: Intermediate

Lightsight软件是基于SCIEX 线性离子阱技术的药物代谢物发现与鉴定软件。培训内容主要包含LightSight软件的详细操作流程、技巧及使用注意事项等。适合已参加过QTRAP基础培训班或具备6个月以上使用经验的仪器操作员。

Lipid Analysis by Differential Ion Mobility Spectrometry - 1 General Overview View Course

Duration: 30 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

During this course, you will learn about the fundamental challenge of lipidomics analysis, namely isobaric interference, what SelexION® Technology is and how it works, the development of DMS as a tool for lipid analysis by mass spectrometry and finally see how SelexION® Technology has been used to solve difficult analytical problems in lipidomics.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Lipid Analysis by Differential Ion Mobility Spectrometry - 2 Hardware Components and Parameter Settings View Course

Duration: 30 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

The overall objective of this eLearning module is to describe in detail the different aspects of the SelexION® Technology device, including the hardware components and parameter settings. During this course, you will learn about the procedures to place the DMS cell onto the mass spectrometer and equilibrate the instrument. Additionally, the different parameter settings that control the function of the SelexION® Technology device will be introduced and discussed in terms of how they affect experimental results.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Lipid Analysis by Differential Ion Mobility Spectrometry - 3 Qualitative Analysis View Course

Duration: 30 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

The overall objective of this eLearning module is to describe how to use the SelexION® Technology device during qualitative analysis and to improve the qualitative characterization of lipids. During this course, you will learn how to develop qualitative analytical assays using the SelexION® Technology device on QTRAP® or Triple Quadrupole Systems or Triple TOF® Instruments. The sections in this module include COV optimization strategies on SCIEX instrument platforms, example data from qualitative lipid analysis and online resources.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Lipid Analysis by Differential Ion Mobility Spectrometry - 4 Quantitative Analysis View Course

Duration: 30 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

The overall objective of this eLearning module is to describe how to use the SelexION® device during quantitative analysis of lipids. The use of SelexION® Technology (differential ion mobility spectrometry, or DMS) in the study of lipidomics greatly improves the quantitative analysis of lipids by lowering the chromatographic baseline (i.e., noise) and minimizing isobaric interference. In this course, the steps needed to develop quantitative assays using DMS will be described on SCIEX Triple™ Quadrupole Instruments/QTRAP® System.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Lipid Analysis by Differential Ion Mobility Spectrometry - 5 Maintenance & Troubleshooting View Course

Duration: 30 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

The overall objective of this eLearning module is to describe routine maintenance of the SelexION® Technology device during the analysis of lipids. Regular cleaning of the DMS cell is suggested to maintain its robustness and performance. In this course, the procedures to clean the hardware are presented, and a troubleshooting guide is provided.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

LipidView™ 1.2 Software Training View Course

Duration: 1 hour
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This training module is intended to train users how to use LipidView™ 1.2 software and develop processing methods to quickly and identify detected lipids and generate lipid profiles from collected data.

Upon completion of LipidView™ 1.2 software training, you will be able to:
Understand the overall design and functionality of the software and successfully interpret the results generated with the LipidView software.
Create and edit a processing method that is specific to the particular instrument and scan types used to acquire lipidomic data
Review processed data using the multiple tools available in the software
Generate customized reports detailing lipidomic results
Export results for further processing by MarkerView software
Export methods to Analyst® software generated from discovery data
Perform relative quantitation on multiple samples, using internal standards to normalize sample data

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Logiciel Analyst – Acquérir (Analyst® Software - Acquire) View Course

Duration: 15 minutes
Language: French
Type: Free Online, eLearning Course
Course Level: Intermediate

Cette formation se concentre sur la création de méthodes et l'acquisition de données à l'aide des logiciels Analyst et Analyst MD. Il couvre les sujets suivants :

Création de méthodes d'acquisition de base et avancées telles que l'ionisation programmée, le MRM programmé (sMRM), les périodes multiples et les expériences IDA
Création d'un lot d'acquisition
Soumission du lot à la file d'attente
Démarrage de l'acquisition de données

Chapitres : 1
Type de certificat : Achèvement
Accréditation PACE : Aucune

Logiciel Analyst – Optimisation du composé et de la source (Analyst® Software - Compound and Source Optimization) View Course

Duration: 25 minutes
Language: French
Type: Free Online, eLearning Course
Course Level: Intermediate

Cette session de formation à votre rythme se concentre sur les bases de l'utilisation des logiciels Analyst® et Analyst MD pour l'optimisation du composé et de la source/gaz pour les systèmes d'instruments triple quadripôle et QTRAP®. L'optimisation manuelle du composé et de la source/gaz sera abordée. De plus, l'optimisation automatisée du composé par perfusion et l'optimisation automatisée de la source/gaz par l'analyse par injection de flux seront couvertes à l'aide de la fonction d'optimisation des composés.

Chapitres : 1
Type de certificat : Achèvement
Accréditation PACE : Aucune

Loạt bài giới thiệu hoạt động LC-MS / MS cho Hệ thống ba tứ cực và Hệ thống QTRAP (Introduction to LC-MS Operation Series for RUO Triple Quad and TRAP Systems) View Course

Duration: 60 minutes
Language: Vietnamese
Type: Free Online, eLearning Course
Course Level: Basic

Loạt bài trực tuyến này được thiết kế để hướng dẫn người dùng cách sử dụng hệ thống SCIEX ba tứ cực và hệ thống QTRAP® (chỉ dành cho hệ thống RUO) cho quy trình công việc định lượng cơ bản. Nó bao gồm bốn mô-đun: Yêu cầu về an toàn và phòng thí nghiệm, Chuẩn bị pha động và chất chuẩn, Tối ưu hóa và thu thập dữ liệu, Phân tích dữ liệu. Các Yêu cầu về an toàn và Ppòng thí nghiệm, Chuẩn bị pha động và chất chuẩn bao gồm các quy trình an toàn thích hợp trong phòng thí nghiệm, cách chuẩn bị hệ thống, pha động và mẫu.

Tối ưu hóa và thu thập dữ liệu bao gồm tối ưu hóa thông số hợp chất và nguồn để tạo phương pháp thu thập và cách thu thập dữ liệu.
Phân tích dữ liệu chỉ cho bạn cách tạo phương pháp xử lý, xử lý và xem xét dữ liệu cũng như tạo báo cáo bằng phần mềm MultiQuant hoặc SCIEX OS-MQ.
Nếu được yêu cầu, bạn có thể tìm dữ liệu ví dụ để thực hành cho quá trình xử lý dữ liệu trong phần Resource ở phía bên trái.

Số chương: 4
Thời lượng: 20 phút cho mỗi khóa học trực tuyến
Cấp độ khóa học: Cơ bản
Loại chứng chỉ: Hoàn thành
Chứng nhận PACE: Không

Loạt bài giới thiệu vận hành LC-MS cho Hệ thống QTOF SCIEX X-Series (Introduction to LC-MS Operation Series for SCIEX X-Series QTOF Systems) View Course

Duration: 10-20 minutes
Language: Vietnamese
Type: Free Online, eLearning Course
Course Level: Basic

Khóa học này bao gồm những kiến thức cơ bản về cách sử dụng Hệ thống QTOF X500R và X500B với phần mềm SCIEX OS và bao gồm bốn mô-đun: Yêu cầu về an toàn và phòng thí nghiệm, Chuẩn bị, Tối ưu hóa và Phân tích dữ liệu. Sau khi hoàn thành loạt bài này, người tham gia sẽ được thông báo về quy trình an toàn thích hợp trong phòng thí nghiệm, cũng như cách chuẩn bị hệ thống, pha động và mẫu. Họ cũng sẽ có thể tinh chỉnh và hiệu chỉnh hệ thống QTOF X-Series, xây dựng phương pháp và tạo / gửi các lô. Phần cuối cùng sẽ bao gồm việc xem xét dữ liệu TOF MS và IDA.

Số chương: 4
Thời lượng: 10-20 phút cho mỗi khóa học trực tuyến
Trình độ: Cơ bản
Loại chứng chỉ: Hoàn thành
Chứng nhận PACE: Không

Làm quen với khách hàng dòng SCIEX 4500, 5500, 6500 (SCIEX 4500, 5500, 6500 Series Customer Familiarization) View Course

Duration: 60 minutes
Language: Vietnamese
Type: Free Online, eLearning Course
Course Level: Basic

Đây là khóa học Làm quen với khách hàng dành cho các máy khối phổ dòng SCIEX 4500, 5500 và 6500. Bạn sẽ được làm quen với tổng quan về phần mềm và phần cứng, cách tinh chỉnh và hiệu chỉnh thiết bị, chạy một lô mẫu và thực hiện bảo trì đơn giản.

Số chương: 5
Thời lượng: 5-20 phút
Trình độ người học: Cơ bản
Loại chứng chỉ: Hoàn thành
Chứng nhận PACE: Không

Làm sạch mặt trước của Hệ thống SCIEX ba tứ cực và QTRAP (Front End Cleaning of SCIEX Triple Quadrupole and QTRAP Systems) View Course

Duration: 20 minutes
Language: Vietnamese
Type: Free Online, eLearning Course
Course Level: Intermediate

Mô-đun đào tạo này bao gồm cách làm sạch các thành phần phía trước cho hệ thống khối phổ kế ba tứ cực và QTRAP hãng Sciex.

Các chủ đề sau được đề cập trong suốt khóa học:
- Tổng quan về các thành phần giao diện người dùng
- Các mẹo làm sạch
- Quy trình làm sạch hệ thống đối với các đĩa mành và orifice, các skimmer và dẫn hướng ion.

Click vào nút "Resources" ở bên trái của trang để biết thêm về "Cách mô phỏng van chuyển hướng" và "Thông số nguồn / khí và cài đặt".

Số chương: 1
Thời lượng: 20 phút
Trình độ người học: Trung cấp
Loại chứng chỉ: Hoàn thành
Chứng nhận PACE: Không

MRM Cubed Application for Quantitation View Course

Duration: 20 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Advanced
Rating:

★★★★★

★★★★★

This self-paced training session provides an overview of MS3 quantitation also referred to as MRM cubed, used to solve difficult quantitation problems utilizing SCIEX QTRAP® systems. Users will learn the theory behind MRM3 as well as how to implement the workflow using proper Analyst® software parameters. This training session also provides a step-by-step guide to MRM3 method development.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Maintenance for the Lipidyzer Platform View Course

Duration: 10 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This module will inform you how to perform basic maintenance for the Lipidyzer Platform, and includes some FAQs.

After taking this module you should be able to….

Install all hardware parts of the SelexION® device
Clean and reassemble the DMS cell
Check that the direct infusion spray is stable

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

MetabolitePilot 软件应用培训(2天) View Course

Language: Chinese
Type: at SCIEX
Course Level: Intermediate

MetabolitePilot软件是基于SCIEX高分辨质谱数据的代谢物发现与确证软件。培训内容主要包含代谢物高分辨数据的采集、MetabolitePilo软件的详细操作流程、技巧及使用注意事项等。适合已参加过QTOF基础培训班或具备6个月以上使用经验的仪器操作员。

Method Development - Column Selectivity View Course

Duration: 20 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

In this course, we will be focusing on different types on column selectivity during method development.
After taking this course, the learner should be able to:

understand the different factors affecting column selectivity
know the differences between C18, C8, C4, phenyl and PFP type reverse phase columns
understand polar analyte selectivity including normal phase, polar functional groups and HILIC selectivity.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Method Development - Mobile Phase View Course

Duration: 20 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This course introduces the subject of reverse phase mobile phases in method development. In this module, we will be focusing on the choice of solvents, mobile phase pH and buffers, isocratic vs. gradient systems and column temperature.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Mobile Phase Preparation and HPLC Pumps Overview View Course

Duration: 20 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Basic
Rating:

★★★★★

★★★★★

This training module reviews the basics of mobile phase preparation and LC pump setup for mass spectrometry (MS) based analytical work using High Performance Liquid Chromatography (HPLC) systems. A brief overview of the components of an HPLC system is discussed and includes general tips on priming LC pumps. Special emphasis is given on proper use of MS grade reagents and measuring equipment. A short quiz tests the user’s knowledge after completion of the training module.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

MultiQuant 2.1 的query(查询)功能 View Course

Duration: 15 minutes
Language: Chinese
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

在此课程中以下内容将会逐一介绍：

软件关于Query的特点
"Acceptance Query"和"MRM Ratio Query"的使用
Query
Query结果
Query结果

单元数: 1
学习对象: 基础操作

MultiQuant 软件和SCIEX OS软件定量流程培训（2天） View Course

Language: Chinese
Type: at SCIEX
Course Level: Intermediate

本培训是针专注于SCIEX定量软件操作的针对性培训。旨在提高用户在SCIEX液质工作流程中更有效和灵活的使用定量软件，以准确和高效的完成项目任务。在实际工作中，检测结果的输出和检测报告的生成经常是困扰实验人员的难点。此培训将讲授如何量身定制合适的报告模板、如何通过Query简化操作流程。培训内容主要包含MultiQuantTM 和OS-MQ定量软件的基础操作、功能拓展以及报告模板的编辑流程等。适合已参加过SCIEX Triple QuadTM /QTRAP®基础培训班或具备6个月以上SCIEX仪器使用经验的学习者。

MultiQuant™ Software Queries View Course

Duration: 10 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

The following topics are covered in this course:

•MultiQuant™ Software Query Overview
•Using Predefined Queries
•Create Simple Query
•Query Export

Chapters: 1
Certificate: None
PACE Accreditation: No

MultiQuant™ MD 软件操作介绍(Working With MultiQuant MD) View Course

Duration: 25 minutes
Language: Chinese
Type: Premium, eLearning Course
Course Level: Intermediate

本课程主要介绍使用MultiQuant™MD软件进行定量。在完成本课程后，学习者将能够处理数据、审查结果并导出数据。

本课程将涵盖以下内容：

-新建处理方法和设置默认方法参数

-处理数据并查看结果表

-导出和报告数据

-使用 Audit Trail 查看器查看事件审计结果

章节: 1
证书类别: 结课
PACE 认证: No

MultiQuant™ Software 2.1 Audit Trail Security View Course

Duration: 10 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

In this course, the following topics are covered;

MultiQuant™ Software and Regulated Environments
Analyst Software Security Settings
Audit Trail Manager
Audit Trail Viewer and Review
Audit Trail Searches
Locking Results Table
Audit Map Export

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

MultiQuant™ 软件操作介绍(Working With MultiQuant Software) View Course

Duration: 60 minutes
Language: Chinese
Type: Premium, eLearning Course
Course Level: Intermediate

本课程是对LC-MS/MS 操作教程- 第四单元数据处理的中级扩展课程。

MultiQuant软件介绍中的工作流程与前面提到的LC-MS/MS课程中介绍的相同，并以此为基础，扩展每个使用者对SCIEX MultiQuant™软件界面的熟悉程度，并更了解该平台强大的分析能力。

完成本课程之后，学习者将能够:

- 在MultiQuant 软件中选择积分算法
- 使用MultiQuant Wizard 处理数据和生成结果表格
- 查看峰和更改积分参数
- 生成标准曲线、数据点图和分析统计表
- 通过Reporter工具生成报告

本在线自学课程中有一些交互部分，学习者可随时在课程中互动。

MultiQuant™ 소프트웨어 작동하기 View Course

Duration: 60 minutes
Language: Korean
Type: Free Online, eLearning Course
Course Level: Intermediate

이 교육과정은 "LC-MS/MS 작동 시리즈 소개 – 4. 데이터 처리"의 기본 과정을 성공적으로 마친 교육생을 위한 중급 교육과정입니다.

MultiQuant 소프트웨어는 SCIEX의 MultiQuant ™ 소프트웨어 인터페이스에 대한 각 학습자의 지식을 확장하고 플랫폼의 견고한 분석 기능을 익히기 위한 기초로서, 앞에서 말한 LC-MS/MS 과정에서 소개 된 것과 동일한 워크 플로우를 따릅니다.

이 학습 모듈을 성공적으로 완료하면 학습자는 다음을 수행 할 수 있습니다.

- MultiQuant 소프트웨어 통합 알고리즘 선택
- MultiQuant Wizard를 사용하여 데이터를 처리하고 결과 테이블 생성
- 피크 검토 및 통합 매개 변수 변경
- 교정 곡선 생성, 플롯 메트릭스 작성 및 통계 분석
- Reporter Tool을 사용하여 보고서 작성하기

자기주도학습 모듈 중에는 학습자가 지시에 따라 코스 자료와 상호 작용할 준비를 해야하는 수많은 포인트가 있습니다.

소요 시간 : 약 60 분

MultiQuant™ 소프트웨어 쿼리 (MultiQuant™ Software Queries) View Course

Duration: 10 minutes
Language: Korean
Type: Free Online, eLearning Course
Course Level: Intermediate

이 강좌에서는 다음 주제를 설명합니다.

•MultiQuant™ 소프트웨어 쿼리 개요
•사전 정의된 쿼리 사용
•간단 쿼리 생성
•쿼리 내보내기

장: 1
시간: 약 10분
학습자 수준: 기초
인증: 없음
PACE 승인: 없음

Non-targeted Screening Data Processing Using SCIEX OS Software View Course

Duration: 20 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This eLearning course focuses on data processing using the non-targeted screening workflow in the Analytics workspace of SCIEX OS software. This is applicable to all SCIEX instruments (excluding MD instruments).

After completing this course, you should be able to:

Describe the non-targeted workflow
Understand how library searching and formula finding can be used in data review
Create a processing method
Create results
Perform data review
Export data and create a report

Chapters: 1
Certificate Type: Completion
PACE Accreditation: None

Non-targeted Screening Workflow Using SCIEX X500R QTOF System View Course

Duration: 30 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

The course introduces the Non-targeted Screening Workflow using the SCIEX X500R QTOF system with SCIEX OS. This is an advanced workflow course, and it is highly recommended that you complete the Introduction to LC-MS/MS on the X500R QTOF System eLearning series before taking this course. Upon completion of the course, learners will be able to create LC and MS methods for screening workflows, acquire data, and process acquired data using Analytics.

The course covers the following topics:

Create LC and MS Methods
Create a batch and acquire data
Process data using the Non-targeted screening workflow in Analytics

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

OneOmics Suite in SCIEX Cloud Platform: ProteinPilot Cloud Workflow for Proteomics View Course

Duration: 20 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate

This course will show you how to use the OneOmics™ Suite in the SCIEX Cloud Platform for the ProteinPilot™Cloud Workflow for Proteomics. The topics covered are:

Overview of the OneOmics Suite in the SCIEX Cloud Platform
How to use CloudConnect for PeakView® software and upload your data files
How to set up your experimental metadata with Experiment Manager to process your ProteinPilot data
How to visualize the data using the Analytics and Browser applications

Chapters: 1
Course Certificate: Completion
PACE Accreditation: None

OneOmics Suite in SCIEX Cloud Platform: SWATH Quantification for Proteomics Workflow View Course

Duration: 20 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate

This course will show you how to perform SWATH quantification for Proteomics using the OneOmics™ Suite in the SCIEX Cloud Platform. The topics covered are:

Overview of the OneOmics Suite in the SCIEX Cloud Platform
How to use CloudConnect for PeakView® software and upload your data files
How to set up your data processing jobs and define the experimental metadata using Experiment Manager
Data processing using the Extractor and Assembler applications
How to visualize the data using the Analytics and Browser applications

Chapters: 1
Course Certificate: Completion
PACE Accreditation: None

OneOmics Suite in SCIEX Cloud Platform: SWATH Results Quantification for Metabolomics View Course

Duration: 20 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate

This course will show you how to process SWATH® results for Metabolomics using the OneOmics™ Suite in the SCIEX Cloud Platform. The topics covered are:

Overview of the OneOmics Suite in the SCIEX Cloud Platform
Using CloudConnect for PeakView Software
Setting up your data processing jobs using Experiment Manager
Data processing using the Extractor and Assembler Applications
Data visualization using the Analytics and Browser Applications

Chapters: 1
Course Certificate: Completion
PACE Accreditation: No

OneOmics Suite in SCIEX Cloud Platform: SWATH Results Visualization for Metabolomics and Proteomics Workflows View Course

Duration: 20 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate

This course will show you how to visualize SWATH® results for Proteomics and Metabolomics using the OneOmics™ Suite in the SCIEX Cloud Platform. The topics covered are:

Overview of the OneOmics Suite in the SCIEX Cloud Platform
How to use the MarkerView and Review applications to visualize your results
Show an example of how to process and visualize a full Multi-Omics data set using the tools in the OneOmics Suite

Chapters: 1
Course Certificate: Completion
PACE Accreditation: None

Peptide Mapping Analysis Using SCIEX X500B QTOF System and BioPharmaView Software View Course

Duration: 20 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This course introduces the SCIEX X500B QTOF System and BioPharmaView software, and demonstrates the workflow for Peptide Mapping analysis.

After taking this course you should be able to:

Understand the basics of Peptide Mapping analysis
Create LC and MS methods in SCIEX OS
Submit a batch in SCIEX OS
Process peptide mapping data using BioPharmaView software

Chapters:1

Certificate Type: Completion
PACE Accreditation: No

Peptide Quant Series - 1. Peptide Structure and Fragmentation View Course

Duration: 20 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This is the first training module in Peptide Quantitation eLearning Series. Upon completion of this eLearning module you will be able to identify major components of peptide backbone structure and conventional amino acids, predict general properties and charge state from peptide sequence, understand mode of peptide fragmentation in a quadrupole, associated peptide MS/MS fragments with a peptide sequence, and understand use of heavy isotope labeled internal standard peptides.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Peptide Quant Series - 2. Introduction to Peptide MRM Development View Course

Duration: 30 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This is the second training module in Peptide Quantitation eLearning Series. Upon completion of this eLearning module, you will be able to understand two major groups of Peptide Quant experiments; identify major ‘rules’ for picking MRM transitions for peptides;understand infusion based peptide MRM optimization methods; utilize Skyline software to predict potential fragment ions for any peptide sequence; and utilize Skyline software for on-column peptide MRM screening and optimization.

Chapters: 1
Certificate Type: None
PACE Accreditation: No

Peptide Quant Series - 3. Introduction to Sample Preparation Techniques for Peptides View Course

Duration: 40 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This is the third training module in Peptide Quant eLearning Series. Upon completion of this training, you will:

Understand basic principles behind protein precipitation methods
Understand isotope labeled internal standard peptides and their use in each sample prep protocol
Identify the different types of solid phase extractions methods, and determine proper conditions for enrichment of a specific peptide analyte
Be able to calculate matrix effects and recovery of extraction procedures; Understand peptide immunoaffinity enrichment strategies.

Chapters: 1
Certificate Type: None
PACE Accreditation: No

Peptide Quant Series - 4. Introduction to Sample Preparation Techniques for Protein Targets View Course

Duration: 40 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This is the 4th training module in Peptide Quant eLearning Series. After taking this training course, the user should be able to:

Understand the use of isotope labeled internal standard proteins and peptides and their use in each sample prep protocol
Understand basic principles behind size exclusion filtration methods
Identify different types of immunoaffinity captures methods, including depletion and enrichment strategies
Be able to apply generic protein precipitation and resolubilization protocols
Understand basic protein protease digestion methods for the cleavage of a protein target into peptides
Be able to calculate digestion efficiency and recovery of extraction preparation procedures.

Chapters: 1
Certificate Type: None
PACE Accreditation: No

Peptide Quant Series - 5. Advanced MS Selectivity for Peptide Quantitation on QTRAP® Systems View Course

Duration: 30 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This is the fifth training module in Peptide Quantitation eLearning Series. Upon completion of this eLearning module you will be able to:

Identify challenges associated with peptide quantitation such as poor fragmentation, high background, and endogenous interferences
Understand the use of an MRM3 method to selectively remove background and interferences for peptide quant
Understand the use of the SelexION™ differential mobility device to separate peptide analytes from endogenous interferences, even with poor fragmenting peptides.

Chapters: 1
Certificate Type: None
PACE Accreditation: No

Phần mềm Analyst – Tối ưu hóa thông số hợp chất và nguồn (Analyst® Software: Compound and Source Optimization) View Course

Duration: 25 minutes
Language: Vietnamese
Type: Free Online, eLearning Course
Course Level: Intermediate

Khóa học này tập trung vào những kiến thức cơ bản về cách sử dụng phần mềm Analyst® và Analyst MD để tối ưu hóa thông số hợp chất và nguồn / khí cho hệ thống thiết bị ba tứ cực và QTRAP®. Cách tối ưu hóa thủ công các thông số hợp chất và nguồn / khí sẽ được trình bày. Ngoài ra, tối ưu hóa thông số hợp chất tự động bằng phương pháp phun và tối ưu hóa nguồn / khí tự động bằng phân tích tiêm dòng sẽ được đề cập bằng cách sử dụng chức năng Tối ưu hóa thông số hợp chất.

Số chương: 1
Thời lượng: khoảng 25 phút
Trình độ: Trung cấp
Loại chứng chỉ: Hoàn thành
Chứng nhận PACE: Không

Processing of QTRAP MS/MS Data in MasterView™ Software for Identification View Course

Duration: 20 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This course introduces the subject of how to process QTRAP data using the MasterView™ software. Upon completion of the course, you will be able to successfully create acquisition and processing methods, and review your processing results in MasterView software.

After taking this training course, you should be able to:

Create an Scheduled MRM-IDA-MS/MS acquisition method in Analyst software
Import MS/MS libraries into MasterView software
Create a processing method for QTRAP MS/MS library searching in MasterView software
Process Scheduled MRM-IDA-MS/MS data in MasterView software
Review and filter results
Report results and export processing parameters for further processing in MultiQuant software

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Protein and Peptide Identification Workflows on SCIEX TripleTOF Systems View Course

Duration: 20 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

Upon completion of this training module, you should be able to:

Learn the SCIEX Protein/Peptide Identification Workflow
Understand the concepts to build an Information Dependent Acquisition (IDA) method using Analyst software
Evaluate IDA data using PeakView software
Understand the process of using ProteinPilot software to search and review data

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

QTRAP 질량분석기 사용자 교육 View Course

Language: Korean
Type: at SCIEX
Course Level: Intermediate

SCIEX KOREA 에서 진행되는 “QTRAP 질량분석기 사용자 교육”은 유료 교육으로 진행되며, 2 달에 한번씩 정기적으로 진행될 예정입니다. 그러나 한 클래스당 정원이 한정되어 있사오니, 미리 신청을 꼭 부탁드립니다.

교육 과정은 질량분석기 기본이론에서 부터 사용자 위주의 Software 교육 및 실습까지 구성되어 있으며, QTRAP 장비를 이용한 Library Matching 등의 다양한 기능을 배우실 수 있을 것입 니다.

교육 내용 및 일정 상세 보기 (hyperlink to https://www.absciex.com/Documents/training/kr/KR-Training-Course%20_QTRAP.pdf)

* 교육 문의 및 담당 : SCIEX Now™ (Tel : 080-020-1000)

Qualitative Lipid Analysis : MS/MSall on TripleTOF Instruments View Course

Duration: 20 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

During this eLearning course, you will be:

Presented with current challenges in the analysis of lipids by mass spectrometry
Introduced to the MS/MS ALL workflow and given step-by-step instructions for its implementation
Introduced to data processing strategies to deal with the large data arrays generated during lipidomics analysis.

Chapters: 1
Certificate Type: None
PACE Accreditation: No

Quantitation and Screening on X500R QTOF System eLearning Path View Course

Duration: 20-30 minutes
Language: English
Type: Paid Online, eLearning Path
Course Level: Basic

This training program is a self-paced eLearning Path for quantitation and screening on X500R QTOF Systems. It is designed for learners with limited operational experience with LC-MS systems and offers a workflow certificate upon completion of a final knowledge assessment Upon completion of the learning path, you should be able to successfully use your instrument and software for your workflow.

Duration: 20-30 minutes for each course
Learner Level: Novice
Certificate Type: Completion
PACE Accreditation: Yes for selected courses
Product Code: TRNELP003

Quantitation and Targeted Identification Data Processing Using SCIEX OS Software View Course

Duration: 20 mins
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This course focuses on qualitative data processing using the Quantitation and Targeted Identification workflow in SCIEX OS software. This course applies to all SCIEX instruments (excluding MD instruments).

After completing this course, you should be able to:

Describe the quantitation and targeted identification workflow
Understand the different types of library searches
Create a processing method
Create results
Perform qualitative data review using the results table and peak review pane
Export and report results

Chapters: 1
Certificate Type: Completion
PACE Accreditation: None

Quantitation and Targeted Identification Workflow with SWATH Acquisition using SCIEX X500R QTOF System View Course

Duration: 20 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This course covers the Quantitation and targeted identification workflow with SWATH Acquisition using the SCIEX X500R QTOF system. This is an advanced course, and it is recommended that learners first complete the "Introduction to LC-MS/MS" course prior to beginning this module. Upon completion of the course, learners will be able to create an LC and MS SWATH acquisition method, acquire and process data.

The course covers the following topics:

What is SWATH Acquisition?
Creating a LC Method in SCIEX OS
Using the SWATH Variable Window Calculator and creating an MS Method in SCIEX OS
Acquiring SWATH data
Processing TOF-MS and TOF-MS/MS data using Analytics

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

Quantitation on SCIEX Triple Quad and QTRAP Systems eLearning Path View Course

Duration: 20-30 minutes
Language: English
Type: Paid Online, eLearning Path
Course Level: Basic

This training program is a self-paced eLearning Path for quantitation on SCIEX Triple Quad and QTRAP Systems. It is designed for learners with limited operational experience with LC-MS systems and offers a workflow certificate upon completion of a final knowledge assessment. Upon completion of the learning path, you should be able to successfully use your instrument and software for your workflow.

Duration: 20-30 minutes for each course
Learner Level: Novice
Certificate Type: Completion
PACE Accreditation: Yes for selected courses
Product Code: TRNELP001

Quantitative Data Processing Using SCIEX OS Software View Course

Duration: 30 mins
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This eLearning series focuses on quantitative data processing using the Analytics workspace in SCIEX OS software for all SCIEX instruments (excluding MD instruments). This entire eLearning series consists of 3 modules : Algorithms and flagging, Create method and results, and Review and report results.

After completing this eLearning series of modules, you should be able to:

Understand the different types of integration algorithms and their parameters
Explain the pre-defined flagging rules for concentration, accuracy, integration and ion ratios
Create a processing method
Create results
Perform data review
Export and report results

Chapters: 3
Certificate Type: Completion
PACE Accreditation: None

Quick maintenance how to videos for the OptiFlow Turbo V source View Course

Duration: 10 minutes
Language: English
Type: Premium, How-to Videos
Course Level: Intermediate

This series of short maintenance videos focuses on the OptiFlow Turbo V Source, and covers how to perform simple instrument maintenance tasks.

Remove and Reinstall the Probe and Electrode
Remove the Ion Source

Chapters: 2
Certificate Type: None
PACE Accreditation: No

Quick maintenance how to videos for SCIEX Triple Quadrupole and QTRAP systems View Course

Duration: 25 minutes
Language: English
Type: Premium, How-to Videos
Course Level: Advanced
Rating:

★★★★★

★★★★★

This series of quick maintenance videos covers the SCIEX triple quadrupole and QTRAP systems. You will become familiar with performing simple maintenance tasks for your system.

General System Maintenance Videos:

Basic computer maintenance

Ion Source Maintenance Videos:

Removing and installing the ion source
Removing and installing the probe
Removing ion source covers
Replacing the metal turbo heater on the Turbo V ion source with external covers
Replacing the turbo heater on the IonDrive Turbo V ion source with external covers
Replacing the ceramic turbo heater on the Turbo V ion source without external covers
ESI probe maintenance and troubleshooting
APCI corona discharge needle replacement

Chapters: 9
Certificate Type: None
PACE Accreditation: No

Quick maintenance how to videos for SCIEX X500 QTOF systems View Course

Duration: 20 minutes
Language: English
Type: Free Online, How-to Videos
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This series of short maintenance videos focuses on the SCIEX X500 QTOF System mass spectrometers, and will cover how to perform simple instrument maintenance.

Upon completion of this course, you will be able to:

Perform system startup and shutdown
Replace the twin electrodes
Perform front end cleaning of the mass spectrometer
Refill and replace the CDS bottles

Chapters: 5
Certificate Type: None
PACE Accreditation: No

Quick maintenance how to videos for the ExionLC 2.0 system View Course

Duration: 40 minutes
Language: English
Type: Premium, How-to Videos
Course Level: Advanced

This series of short maintenance videos focuses on the ExionLC 2.0 system, and cover how to perform simple instrument maintenance tasks.

ExionLC 2.0 and 2.0+ Autosampler

Flushing the autosampler
Replacing the sample needle
Replacing the air needle
Replacing the syringe
Replacing the fuses

ExionLC 2.0 Binary Pump

Removing and installing the pump head
Dissembling and reassembling the pump head
Replacing the o-rings
Replacing the pump seals
Purging the pump
Replacing the check valves
Replacing the mixer
Replacing the filter cartridge

ExionLC 2.0+ Binary Pump

Replacing the check valves
Replacing the mixer
Replacing the stator and rotor seal
Replacing the filter cartridge

ExionLC 2.0 Detectors

Replacing the flow cell

Chapters: 18
Certificate Type: None
PACE Accreditation: No

Quick maintenance how to videos for the Jasper HPLC system View Course

Duration: 5 minutes
Language: English
Type: Premium, How-to Videos
Course Level: Advanced
Rating:

★★★★★

★★★★★

This series of short maintenance videos focuses on the Jasper HPLC System, and cover how to perform simple instrument maintenance tasks.

Clean Up the Leaks in the Column Oven
Clean the Pump Leak Tray
Remove Autosampler Clear Acrylic Panel (Panel F)
Clean the Rinsing Port & Cover and Replace Rinsing Port Cap
Rinse Needle and Sample loop
Remove Condensation
Replace the Fuses
Clean Check Valves
Replace the Needle Seal
Replace Sample Loop

Chapters: 10
Certificate Type: None
PACE Accreditation: No

Quick maintenance how to videos for the SCIEX M5 MicroLC system View Course

Duration: 6 mins
Language: English
Type: Premium, How-to Videos
Course Level: Advanced
Rating:

★★★★★

★★★★★

This series of short maintenance videos focuses on the SCIEX M5 MicroLC System, and cover how to perform simple instrument maintenance tasks.

Putting PAL Virtual Terminal into Extended User Mode
Replace the Valve Stator and Rotor Seal
Replace the Sample Loop
Prime the Autosampler Wash Pumps
Replace The Syringe Needle
Replace the Syringe Barrel and Plunger
Measure the Flow Rate
Calibrate the Flow Meters
Re-initialize Pressure Transducers

Chapters: 9
Certificate Type: None
PACE Accreditation: No

Resolution Equation View Course

Duration: 20 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

In this course, the Resolution equation and its components will be described and how each component affects resolution.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

SCIEX Biotransformation Workflow Using the BioTrans Solution View Course

Duration: 30 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This course covers how to acquire and process SWATH data using MetabolitePilot Software 2.0 with TOF instruments controlled either by the Analyst TF or SCIEX OS software.

After taking this course, you should be able to:

Describe SWATH acquisition and its workflow
Create SWATH acquisition methods
Build a batch and acquire SWATH data
Process, review and interpret SWATH data using MetabolitePilot for small molecule, peptide and ADC workflows

Chapters: 1
Certificate Type: Completion
PACE Accreditation: None

SCIEX Empower Driver View Course

Duration: 15 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Basic

This course is an introduction to the SCIEX Empower™ Driver that is used on SCIEX CE instrumentation. The Empower driver is a software interface that gives users direct control of their PA 800 Plus Pharmaceutical Analysis System in the Empower 3 Chromatography Data System or CDS.

This course will cover the following topics:

Overview of the SCIEX Empower Driver
Features and new updates of the Empower Driver related to detectors, creating methods and data processing
Video demonstration of using the features of the Empower Driver

Chapters: 1
Certificate Type: Completion
PACE Accreditation: None

SCIEX Fast Glycan Labeling and Analysis Technology View Course

Duration: 40 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This course is an overview of the SCIEX Fast Glycan labelling and analysis technology. It covers how to perform sample preparation using the SCIEX Fast Glycan Labeling and Analysis kit, and obtain separation of the glycans by capillary electrophoresis (CE) on the PA 800 Plus System.

After taking this course, you should be able to:

Understand the importance of glycan analysis
Perform sample preparation using the SCIEX Fast Glycan Labeling and Analysis kit
Use the PA 800 Plus System to perform data analysis
Troubleshoot common issues that occur when using the Fast Glycan Labeling and Analysis application

Chapters:1
Certificate Type: Completion
PACE Accreditation: None

SCIEX LC-MS基础培训: QTRAP（4天） View Course

Language: Chinese
Type: at SCIEX
Course Level: Basic,Intermediate

本培训课程适合具有1-3个月QTRAP仪器操作经验的初学者和有相关研发项目需求的中级用户。通过该培训学习者能够掌握使用QTRAP系统进行定性和定量分析所必需的知识。本课程以小分子应用为重点，分为基础LC-MS/MS理论讲座和旨在加强知识掌握的动手操作练习。重点介绍了：质谱定量工作流程、QTRAP扫描的基本功能、Scheduled MRM™采集和信息依赖性采集(IDA)方法的开发，还包含仪器的日常维护、软件操作及相应数据分析。由经验丰富的SCIEX讲师在SCIEX培训中心现场授课。

在完成本课程之后，学习者将能够清楚地理解三重四极杆和线性离子阱(LIT)理论与相关操作，能够使用QTRAP仪器进行化合物鉴定的信息依赖性采集(IDA)实验和基本数据处理，能够将课程中学习到的原则和实践技能应用于特定工作流程中。

SCIEX LC-MS基础培训: 三重四极杆（4天） View Course

Language: Chinese
Type: at SCIEX
Course Level: Basic

本培训课程适合具有1-3个月 SCIEX Triple Quad 仪器操作经验的初学者和有相关研发项目需求的中级用户。通过该培训，学习者能够掌握使用Triple Quad(三重四极杆)系统进行定量分析所必需的知识。本课程以小分子应用为重点，分为基础LC-MS/MS理论讲座和旨在加强知识掌握的动手操作练习。重点介绍了通过三重四极杆进行定量分析流程中的方法建立、进样分析、数据处理、日常维护与问题解决。由经验丰富的SCIEX讲师在SCIEX培训中心现场授课。

在完成本课程之后，学员能够清楚地理解LC-MS/MS基本原理与相关操作，熟悉定量流程中液相与质谱方法的建立与参数优化，使用定量软件进行各种数据分析时常见问题，也将迎刃而解。学员将能够把在此培训中学习到的原则和实践技能应用于质谱定量工作流程。

SCIEX MS Source Exhaust Maintenance and Troubleshooting View Course

Duration: 10 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This course explains an overview of the source exhaust for your mass spectrometer, and how it works. It explains the typical symptoms of source exhaust failure using both visual and audible clues, and details basic troubleshooting and maintenance tasks to keep your source exhaust working.

Chapters: 1
Certificate Type: None
PACE Accreditation: No

SCIEX NanoSpray III Ion Source View Course

Duration: 30 minutes
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This course is designed to provide the new user a primer on how to assemble, optimize and test the NanoSpray III Ion Source. It is assumed that you have a working knowledge of mass spectrometry and Nano flow LC. Following the completion of this course, you will be able to:

Describe the usage of the NanoSpray III Ion Source
Identify the different parts of the source
Assemble the NanoSpray III Ion Source
Test that the source is functioning properly
Optimize methods
Perform basic troubleshooting processes

Chapters: 1
Certificate Type: None
PACE Accreditation: No

SCIEX OS - MS Tune for SCIEX Triple Quad and QTRAP MS/MS Systems View Course

Duration: 30 mins
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate

This course covers how to use MS Tune in SCIEX OS for SCIEX Triple Quad and QTRAP MS/MS Systems. In this course, we will review the following topics:

Configuring devices in SCIEX OS
Tuning solutions
The Tuning Instrument data file
How to verify and tune your SCIEX system performance using SCIEX OS

Chapters: 1
Certificate Type: Completion
PACE Accreditation: None

SCIEX OS - Method Creation for Triple Quad and QTRAP Systems View Course

Duration: 30 mins
Language: English
Type: Premium, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This course covers how to create LC and MS methods for SCIEX Triple Quad and QTRAP Systems using SCIEX OS. It includes the following topics:

Creation of an MS method
Advanced MS method parameters
Advanced features for an MS method such as ionization scheduling, multiple experiments, experiment scheduling and default settings
Creation of an MS method using the Scheduled MRM algorithm
Creation of an IDA MS method
Conversion of an Analyst method to a SCIEX OS MS method
Creation of an LC method

Chapters: 1
Certificate Type: Completion
PACE Accreditation: None

SCIEX OS Security and Audit Trail View Course

Duration: 20 mins
Language: English
Type: Premium, eLearning Course
Course Level: Advanced
Rating:

★★★★★

★★★★★

This eLearning course will cover the security and audit trail functionality in SCIEX OS. After completing this course, you should be able to:

Understand how SCIEX OS works together with Windows to control and audit system access
Configure users and their access to SCIEX OS functionality
Set up audit map templates for auditing of project and workstation events
Review audited events using the Audit Trail workspace
Use the Event Log workspace to view unaudited system events

Chapters: 1
Certificate Type: Completion
PACE Accreditation: None

SCIEX OS 软件基础教程 (Introduction to SCIEX OS） View Course

Duration: 15 mins
Language: Chinese
Type: Free Online, eLearning Course
Course Level: Basic

本在线课程是SCIEX OS软件的功能介绍培训。

通过对本课程的学习能够掌握到：

SCIEX OS，进入目的功能
SCIEX OS 中每个模块的主要功能
能够在每个工作模块中完成基本任务

单元数： 1
学习市场： 15mins
学习者级别：初级
证书类型： Completion
PACE 认证：无

SCIEX QTRAP® 시스템을 사용하여 IDA 시험법 생성 View Course

Duration: 40min
Language: Korean
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

이 프리젠테이션의 목적은 SCIEX QTRAP® 장비 초보자가 Linear Ion Trap 시험법을 만드는 방법을 소개하기 위함입니다. 사용자가 시험법 개발 중에 알아야 하는 사항도 소개합니다.

기간: 약 34분

이 자가 주도형 교육 세션은 질량 분석법, 이온 형성, 질량 분석기 및 검출기 사용을 포함한 새로운 사용자의 질량 분석법 기초를 설명합니다. 이 과정의 PACE 인증과 PACE 승인(1 PACE 그레딧과 동일)을 얻고자 하는 학습자는 반드시 학습 모듈을 이수하고 간단한 온라인 평가 질문을 통과해야 합니다.

장: 1
기간: 33분
학습자 수준: 기초
인증 유형: 완료
Pace 승인: 있음

SCIEX QTRAP系统高级应用培训（2天） View Course

Language: Chinese
Type: at SCIEX
Course Level: Advanced

本培训课程适合具有六个月以上QTRAP仪器操作经验的使用者和有相关研发项目需求的中级用户。通过该培训学习者能够深入了解和应用QTRAP系统进行定性和定量分析。本课程以小分子应用目标，重点介绍了：质谱分段扫描定量工作流程、QTRAP扫描在定性和定量领域的深入应用、信息依赖性采集(IDA)方法的开发与优化，还包含IDA数据解读分析、谱库的构建与检索等内容。由经验丰富的SCIEX讲师在SCIEX培训中心现场授课。

SCIEX Software Workflow Training View Course

Language: Korean
Type: at SCIEX
Course Level: Intermediate

'SCIEX Software Workflow Training'은 4가지 주제 BioPharma, Proteomics, Small molecule screening, MET ID을 가지고 정기적으로 진행될 예정입니다.

SCIEX Software를 이용하여 도출하고자 하시는 데이터를 만드실 수 있도록 workflow를 교육 지원 해드립니다.

교육 일정은 총 1일로 구성되어 있으며, 사용자 위주의 Software 교육 및 실습으로 구성되어 있습니다.

교육 내용 및 일정 상세 보기 (hyperlink to https://www.absciex.com/documents/training/kr/KR-Training-Course-2020_SW_workflow.pdf)

* 교육 문의 및 담당 : SCIEX Now™ (Tel : 080-020-1000)

교육코드 날짜 주제 관련 소프트웨어

SCIEX Triple Quad 7500 LC-MS/MS System – QTRAP Ready Technology Overview View Course

Duration: 10 mins
Language: English
Type: Free Online, eLearning Course
Course Level: Basic
Rating:

★★★★★

★★★★★

This course is an overview of the new technology and features used in the SCIEX Triple Quad 7500 LC-MS/MS System – QTRAP Ready. It covers the following topics:

QTRAP Ready Functionality
OptiFlow Pro Ion Source
E Lens Technology
D Jet Ion Guide
The features and benefits of the new technology

Certificate Type: Completion
PACE Accreditation: None

SCIEX Triple Quad 和 QTRAP 系统的前端清洗 View Course

Duration: 20 minutes
Language: Chinese
Type: Free Online, eLearning Course
Course Level: Intermediate

本课程涵盖了Triple Quad™& QTRAP® 系统的前端清洗的基础知识和实践。课程中包含若干视频，对仪器的放真空，前端拆卸，清洗和组装等各方面进行了演示。

时长:20-30分钟
分钟学习者程度: 基础阶段

SCIEX Triple Quadrupole and QTRAP Systems Maintenance and Troubleshooting Guide View Course

Duration: 30 minutes
Language: English
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

This course is designed to introduce the user to some common maintenance and troubleshooting issues that may occur on SCIEX Triple Quadrupole and QTRAP® systems. It consists of the following topics:
- System familiarization of MS data analysis, the ion source and ESI and APCI probes
- Top ten most common problems reported to our Technical Support and Service group
- Problems and troubleshooting section detailing the most common signal related, computer and communication related issues and how to fix them
- Maintenance goes over recommended maintenance tasks and best practices

Chapters: 1
Certificate Type: Completion
PACE Accreditation: None

SCIEX Triple Quadrupole 및 QTRAP 시스템 유지관리 및 문제해결 가이드(TQ and QTRAP® Maintenance and Troubleshooting Guide) View Course

Duration: 30 minutes
Language: Korean
Type: Free Online, eLearning Course
Course Level: Intermediate
Rating:

★★★★★

★★★★★

이 강좌는 SCIEX Triple Quadrupole 및 QTRAP® 시스템의 일반적인 유지관리 및 문제해결을 사용자에게 설명하기 위해 계획되었으며, 다음 주제로 구성되어 있습니다.
- MS 데이터 분석, 이온 소스, ESI 프로브 및 APCI 프로브 등의 시스템 숙련도
- SCIEX 기술 지원 및 서비스(Technical Support and Service) 그룹에 보고된 가장 많이 발생한 최상위 문제 10개
- 가장 많이 발생하는 공통 신호 관련 문제 및 컴퓨터와 통신 관련 문제와 이를 해결하는 방법을 설명하는 문제 및 문제해결 섹션
- 권장 유지관리 작업 및 모범 사례를 설명하는 유지관리

시간: 30분
학습자 수준: 중급
인증 유형: 완료
PACE 승인: 없음

SCIEX Triple Quadrupole 및 QTRAP® 시스템의 LC-MS/MS 작동 시리즈 소개(Introduction to LC-MS/MS Operation Series for SCIEX Triple Quadrupole and QTRAP ) View Course

Duration: 60 minutes
Language: Korean
Type: Free Online, eLearning Course
Course Level: Basic

이 e 러닝시리즈는기본정량워크플로우를위해 SCIEX triple quadrupole 및 QTRAP® 시스템 (연구목적시스템만해당)을사용하는방법을사용자에게가르쳐주기위한과정입니다.안전및실험실요구사항, 이동상및시료준비, 최적화및데이터수집및데이터분석의네가지모듈로구성됩니다. 안전및실험실요구사항, 이동상및시료준비에는적절한실험실안전절차, 시스템준비방법, 이동상및샘플이포함됩니다. 최적화및데이터수집은수집방법을생성하기위한컴파운드및소스최적화그리고와데이터수집방법을다룹니다.데이터분석은데이터처리방법작성, 데이터처리및검토, MultiQuant^TM 또는 SCIEX OS-MQ 소프트웨어를사용하여보고서를생성하는방법을보여줍니다.필요한경우왼쪽의리소스섹션에서데이터처리를위한실습으로사용할예제데이터를찾을수있습니다.

챕터: Four (4)
소요 시간 : 각 온라인 코스 당 20분
코스 레벨 : 기본
인증 유형 : 완료
PACE 인증 : 아니오

SCIEX TripleTOF System eLearning Path View Course

Duration: 20-40 minutes
Language: English
Type: Paid Online, eLearning Path
Course Level: Basic

This training program is a self-paced eLearning Path for SCIEX TripleTOF® Systems. It is designed for learners with limited operational experience with LC-MS systems and offers a workflow certificate upon completion of a final knowledge assessment. Upon completion of the learning path, you should be able to successfully use your instrument and software for your workflow.

Duration: 20-30 minutes for each course
Learner Level: Novice
Certificate Type: Completion
PACE Accreditation: Yes for selected courses
Product Code: TRNELP005

SCIEX TripleTOF 系统在线学习路径 View Course

Duration: 20-30 minutes
Language: Chinese
Type: Paid Online, eLearning Path
Course Level: Basic

此为SCIEX University课程中SCIEX TripleTOF® 系统的自主在线学习路径。其适合于LC-MS系统操作经验较少的学习者。在完成最终的知识测验后将能够获得工作流程证书。在完成学习路径之后，完成学习路径后，您将能够顺利地将仪器和软件用于您的工作流程。

时长：20-30 min/每个课程
学习者级别：初学者
证书类型：结课
PACE 认证：对已选课程适用

产品编码：TRNELP005

SCIEX TripleTOF 系统的前端清洗(Front End Cleaning of SCIEX TripleTOF) View Course

Duration: 15 minutes
Language: Chinese
Type: Free Online, eLearning Course
Course Level: Intermediate

Analytical Flow

Ultra-low Flow

Clinical Research

Food and Beverage Testing

Environmental Testing

Pharma BioPharma

Forensics

Instrument Control Software

Workflow Module Software

Application Module Software

High Resolution Libraries

QTRAP ® Libraries

Kits

Reagents

Food Omics

Quick Links

Get Help

Customer Documents

For Contacts

For Support

For Public Relations

Course Catalog

Refine Your Search

Training Location

Training Topic

Technique

Training Type

Course Level

Certificate Type

Language

HPLC and CE products

Ion Mobility Spectrometry

Mass Spectrometers

Software

Integrated Solutions

Diagnostics Instruments

Filtered Options

QTRAP ^® Libraries