Course Catalog

The course introduces the high-resolution MRM workflow using the SCIEX X500R QTOF system with SCIEX OS. This is an advanced workflow course, and it is recommended that you complete the LC-MS/MS Operation Series for the X500R QTOF system eLearning course before taking this course. Upon completion of the course, learners will be able to build an optimized MS method, submit a batch and process data.

The course covers the following topics:
- Guided MRM HR compound optimization
- TOF MSMS method editor
- Build a batch and run scheduled MRM HR
- Process data using the quantitation, and quantitation and targeted identification workflows

Chapters: 1
Duration: 25 minutes
Learner Level: Advanced
Certificate Type: Completion
PACE Accreditation: No

Course ID: f92ed636-7b44-48be-9966-e2294969f4a0

Read less

In this course, we introduce the SCIEX X500B QTOF System and BioPharmaView^TM software, and demonstrate the workflow for Intact Biologics analysis.

After taking this course, you should be able to:
- Understand the basics of Intact Biologics analysis
- Be familiar with the hardware and software features
- Create LC and MS methods to acquire data in SCIEX OS
- Submit a batch
- Process Intact Biologics data using BioPharmaView software

Chapters: 1
Duration: 20 minutes
Learner Level: Basic
Certificate Type: Completion
PACE Accreditation: No
Course ID: 4d4bac18-82e6-4ecb-9c9a-6c992f5b7468

Read less

This course covers the basics of how to use the X500R and X500B QTOF Systems with the SCIEX OS software, and is comprised of four modules: Safety and Lab Requirements, Preparation, Optimization, and Data Analysis. Upon completion of the series, participants will be informed of appropriate laboratory safety protocol, as well as how to prepare the system, mobile phases, and samples. They will also be able to tune and calibrate the X-Series QTOF system, build methods and create/submit batches. The final section will cover the review of TOF MS and IDA data.

Chapters: Four (4)
Duration: 20 minutes for each online course
Course Level: Basic
Certificate Type: Completion
PACE Accreditation: No

Course ID: 77a2fc7e-142e-43da-90da-96bb6b69aace

Read less

Time Of Flight mass spectrometry has a myriad of uses. Screening and quantitation for all types of toxilogical studies immediately comes to mind. The detection and measurement of compounds demands increased sensitivity (high resolution) so that the accurate mass of compounds can be properly determined.

Upon completion, participants will be able to:

- identify applications for which Time of Flight (TOF) mass spectrometry is used
- explain the principles of TOF mass spec at a high level
- detail how samples are processed via this method of LC analysis
- Describe TOF components such as the reflectron, quadrupoles, detector and accelerator
- View and comprehend theoretical animations illustrating how a mass spectrometer works to
screen and quantify analytes.

Chapters: One (1)
Duration: 30 minutes
Course Level: Basic
Certificate Type: Completion
PACE Accreditation: No

Course ID:

Read less

The course introduces the Non-targeted Screening Workflow using the SCIEX X500R QTOF system with SCIEX OS. This is an advanced workflow course, and it is highly recommended that you complete the Introduction to LC-MS/MS on the X500R QTOF System eLearning series before taking this course. Upon completion of the course, learners will be able to create LC and MS methods for screening workflows,  acquire data, and process acquired data using Analytics. 

The course covers the following topics:
- Create LC and MS Methods
- Create a batch and acquire data
- Process data using the Non-targeted screening workflow in Analytics

Chapters: 1
Duration: 25 minutes
Learner Level: Advanced
Certificate Type: Completion
PACE Accreditation: No

Course ID: 81915288-a86d-46cd-a6d7-3fa9d50632d7

Read less

Product Number: TRNSU118            Tuition: $3,130 USD              Location: Framingham, MA

Objective:

This is an introductory X500R QTOF mass spectrometry course designed for attendees who will be using SCIEX OS for small molecule quantitation (MRMHR) and/or small molecule screening workflows (IDA and SWATH). The course is divided between classroom-based lectures and hands-on laboratory work. The following topics will be covered: basic QTOF theory, overview of X500QTOF instrument technology, SCIEX OS orientation, instrument tuning and calibration, acquisition method creation (MRMHR, IDA, SWATH), data processing (including an introduction to library searching) and basic instrument maintenance. It is intended for those who have completed a SCIEX University Success Program or have some operational experience with SCIEX LC-MS systems.

CANCELLATION or RESCHEDULING POLICY

For cancellation/rescheduling, please contact us at na.customertraining@sciex.com at least 3 weeks prior to the start of class.
We reserve the right to cancel a class until 3 weeks prior to the start date of the training class. If the class is cancelled, we will assist you in rescheduling.

TRAINING LOCATION ADDRESS

500 Old Connecticut Path, Framingham, MA 01701

NOTES

The tuition payment (which does not include travel and living expenses) is for one participant at a SCIEX location and valid for 12 months from the date of purchase.

For any help regarding this training course, please contact na.customertraining@sciex.com

Read less

This course introduces the SCIEX X500B QTOF System and BioPharmaView^TM software, and demonstrates the workflow for Peptide Mapping analysis. 

After taking this course you should be able to:
- Understand the basics of Peptide Mapping analysis
- Create LC and MS methods in SCIEX OS
- Submit a batch in SCIEX OS
- Process peptide mapping data using BioPharmaView software

Chapters: 1 
Duration: 20 minutes
Learner Level: Basic 
Certificate Type: Completion
PACE Accreditation: No
Course ID: 9fd8ab30-e8f5-4a74-8867-51fa91931ec2

Read less