This series of short maintenance videos focuses on the ExionLC 2.0 system, and cover how to perform simple instrument maintenance tasks.

ExionLC 2.0 and 2.0+ Autosampler

• Rack positioning and syringe care
• Flushing the autosampler
• Replacing the sample needle
• Replacing the air needle
• Replacing the syringe
• Replacing the fuses

ExionLC 2.0 Binary Pump

• Removing and installing the pump head
• Dissembling and reassembling the pump head
• Replacing the o-rings
• Replacing the pump seals
• Purging the pump
• Replacing the check valves
• Replacing the mixer
• Replacing the filter cartridge

ExionLC 2.0+ Binary Pump

• Replacing the check valves
• Replacing the mixer
• Replacing the stator and rotor seal
• Replacing the filter cartridge

ExionLC 2.0 Detectors

• Replacing the flow cell

Related instruments: ExionLC 2.0 and 2.0+ system

Related software: Analyst and SCIEX OS software

Certificate type: None

PACE accreditation: None

This course introduces you the operating principles of the ExionLC 2.0 Autosampler and describes some best practices to use during acquisition. It covers the following topics:

• Introduction to the ExionLC 2.0 Automsampler
• Differences between fixed loop and flow through needle designs
• Operating principles of the ExionLC 2.0 Autosampler
• Operating modes for the ExionLC 2.0 Autosampler
• Best practices

Related instruments: ExionLC 2.0 and 2.0+ system

Related software: Analyst and SCIEX OS software

Certificate type: Completion

PACE accreditation: None

This training module presents the new features and work flow of DiscoveryQuant software 2.1 Analyze. The use of optimized parameters from the DiscoveryQuant software 2.1 Database is described to build Multiple Reaction Monitoring (MRM) acquisition methods. The procedures for DiscoveryQuant software 2.1 Analyze sample batch template creation and sample analysis submission are presented. Data integration and final report generation are also covered.

Chapters: 1
Certificate Type: None
PACE Accreditation: No

This learning path for the ExionLC 2.0 and 2.0+ systems covers the use and maintenance of your LC system. Upon completion of the learning path, you should be able to successfully use your instrument for your workflow.

完成本课程后，用户应该能够：

了解SWATH 工作流程

使用发现数据生成离子数据库

利用 SWATH 2.0 MicroApp 生成全面 XIC 以进行蛋白质和肽定量

利用 SWATH 2.0 MicroApp 进行数据导出，进行进一步的统计分析

このトレーニングコースの受講後、以下のことができるようになります。：

• SWATHワークフローを理解する
• ディスカバリーデータからIon Libraryを生成する
• 包括的なXIC生成のためにSWATH 2.0 MicroAppを利用する
• SWATH 2.0 MicroAppを利用した、さらなる統計解析のためのデータのエクスポート

チャプター数 : 1
コース修了認定証 : 有り
P.A.C.E. 認定対象 : 対象外

This course gives you an introduction to the SCIEX ExionLC 2.0 and 2.0+ system and covers its features and benefits. It includes the following topics:

• Overview of the system
• Overview of the different modules

Related instruments: ExionLC 2.0 and 2.0+ systems

Related software: SCIEX OS and Analyst software

Certificate type: Completion

PACE accreditation: None

This training module presents the new features and work flow of DiscoveryQuant software 2.1 Optimize. Initial hardware and starter method setup are reviewed. Automatic compound optimization through Flow Injection Analysis (FIA) is described including the use of the new QuickTune and FineTune options. Compound review using the DiscoveryQuant software 2.1 Database is also covered.

Chapters: 1
Certificate Type: None
PACE Accreditation: No

This self-paced, online training will demonstrate the workflow of ChemoView 2.0 software data processing of MS/MS data acquired from SCIEX triple quad and QTRAP system instruments. Users will learn how to define analyte types and sample types; define Tests and Analytes; define processing methods and review reports.

This training session describes the maintenance procedures for the API 2000 and QTRAP systems TurboIonSpray source.

Chapters: 1
Certificate Type: None
PACE Accreditation: No