강좌 카탈로그

이 자가 주도형 교육 세션에서는 Triple Quadrupole 과 QTRAP 장비 시스템의 분해능과 보정에 사용되는 Analyst 및 Analyst MD 소프트웨어 사용 방법에 대한 기본 사항을 중점으로 설명합니다. 주제는 다음과 같습니다.

• 분해능 최적화
• 분해능 피크 스펙트럼 검토
• 스펙트럼에서 질량 보정
• 질량 보정 보고서 및 질량 보정 결과

인증: 없음
PACE 승인: 없음

이 자가 주도형 교육 세션에서는 새 사용자를 위한 Analyst 소프트웨어 기본 작동 방법을 설명합니다. 주제에는 사용자 인터페이스, 프로젝트 폴더 및 구조, 시스템 상태 아이콘, 소프트웨어의 5가지 모드, 도움말 파일을 찾는 방법, 하드웨어 프로필, 감사 추적 및 기본 컴퓨터 유지관리 등이 포함되어 있으나 이에 국한되지 않습니다. 이 강좌 이수에 대한 PACE 인증서와 PACE 승인 획득(PACE 크레딧 한 개(1)와 동일)에 관심 있는 학습자는 학습 모듈과 간단한 온라인 평가 조사를 성공적으로 완료해야 합니다.

이 교육 강좌에서는 Analyst 및 Analyst MD 소프트웨어를 사용한 분석법 만들기와 데이터 수집을 집중적으로 설명합니다. 다음 주제로 구성되어 있습니다.
- 예약 이온화, Scheduled MRM (sMRM), 여러 기간 및 IDA 실험과 같은 기본 및 고급 수집 방법 만들기
- 수집 배치 만들기
- 배치를 대기열에 제출
- 데이터 수집 시작

기간: 15분
학습자 수준: 기초
인증 유형: 완료
PACE 승인: 없음

이 자가 주도형 교육 세션에서는 Triple Quadrupole과 QTRAP 장비 시스템의 화합물 및 소스/가스를 최적화할 수 있는 Analyst 및 Analyst MD 소프트웨어 사용 방법에 대한 기본 사항을 중점으로 설명합니다. 수동 화합물 및 소스/가스 최적화를 설명합니다. 또한 화합물 최적화 기능을 사용하여 주입을 통한 자동 화합물 최적화 및 플로 인젝션 분석을 통한 자동 소스/가스 최적화를 설명합니다.

이 e러닝 시리즈는 기본 정량 분석 워크플로우용 Echo MS® 시스템을 사용하는 방법을 설명하기 위해 설계되었습니다. 이 시리즈는 안전 및 실험실 요구 사항, 이동상 및 표준물 전처리, 데이터 수집 및 데이터 분석 등 4가지 모듈로 구성되어 있습니다.

• 안전 및 실험실 요구 사항과 이동상 및 표준물 전처리에서는 적절한 실험실 안전 절차와 시스템, 이동상, 시료를 전처리하는 방법을 설명합니다.
• 데이터 수집은 MS 및 AE 분석법 만들기 및 데이터 수집 방법을 설명합니다.
• 데이터 분석에서는 처리 분석법 만들기, 데이터 처리 및 검토, 보고서 생성 및 데이터 처리 자동 트리거 방법을 설명합니다.

필요한 경우 왼쪽의 리소스 섹션에서 예제 데이터를 찾아 데이터 처리 실습에 사용할 수 있습니다.

장: 4
인증 유형: 완료

이 교육과정은 "LC-MS/MS 작동 시리즈 소개 – 4. 데이터 처리"의 기본 과정을 성공적으로 마친 교육생을 위한 중급 교육과정입니다.

MultiQuant 소프트웨어는 SCIEX의 MultiQuant 소프트웨어 인터페이스에 대한 각 학습자의 지식을 확장하고 플랫폼의 견고한 분석 기능을 익히기 위한 기초로서, 앞에서 말한 LC-MS/MS 과정에서 소개 된 것과 동일한 워크 플로우를 따릅니다.

이 학습 모듈을 성공적으로 완료하면 학습자는 다음을 수행 할 수 있습니다.

- MultiQuant 소프트웨어 통합 알고리즘 선택
- MultiQuant Wizard를 사용하여 데이터를 처리하고 결과 테이블 생성
- 피크 검토 및 통합 매개 변수 변경
- 교정 곡선 생성, 플롯 메트릭스 작성 및 통계 분석
- Reporter Tool을 사용하여 보고서 작성하기

자기주도학습 모듈 중에는 학습자가 지시에 따라 코스 자료와 상호 작용할 준비를 해야하는 수많은 포인트가 있습니다.

이 강좌에서는 다음 주제를 설명합니다.

•MultiQuant소프트웨어 쿼리 개요
•사전 정의된 쿼리 사용
•간단 쿼리 생성
•쿼리 내보내기

장: 1
인증: 없음
PACE 승인: 없음

이 과정에서는 SCIEX Triple Quad 및 QTRAP 시스템을 위한 SCIEX OS 소프트웨어에서 MS Tune 작업 공간을 사용하는 방법에 대해 다룹니다. 이 과정에서는 다음 주제를 배우게 될 것입니다:

• SCIEX OS 소프트웨어에서의 장치 구성
• 튜닝 솔루션
• 튜닝 시스템 데이터 파일
• SCIEX OS 소프트웨어를 사용하여 SCIEX 시스템 성능을 확인하고 조정하는 방법

• 기기 성능 확인
• 튜닝 및 보정
• 포지티브 검출기 최적화

관련 기기: 4500, 5500, 5500+, 6500, 6500+, 7500 시스템

관련 소프트웨어: SCIEX OS 소프트웨어

인증 유형: 완료

PACE 승인: 아니요

이 강좌에서는 SCIEX OS 소프트웨어의 Explorer(탐색기) 작업 영역을 사용하여 데이터 파일을 정성 검토하는 방법을 설명합니다. 다음과 같은 주제를 설명합니다.

• 데이터 보기
• 스펙트럼 및 크로마토그램 생성
• 데이터 파일 정보 보기
• 처리 작업 수행

관련 장비: 3200, 4000, 3500, 4500, 5500, 5500+, 6500, 6500+, 7500, TripleTOF 6600+, TripleTOF 6600, TripleTOF 5600, TripleTOF 5600+, TripleTOF 4600, TripleTOF 4600+, X500R QTOF, X500B QTOF 및 ZenoTOF 7600 시스템

관련 소프트웨어: SCIEX OS 소프트웨어

인증 유형: 완료

이 강좌에서는 SCIEX OS 소프트웨어를 사용하여 데이터를 수집하는 방법을 보여주며 SCIEX OS 소프트웨어에서 지원되는 모든 Triple Quad, QTRAP, X500 및 ZenoTOF 시스템에 적용됩니다. 다음과 같은 주제가 포함되어 있습니다.

• SCIEX OS 소프트웨어 개요
• 시료 및 분석법 정보 입력
• 성분 농도 입력
• 배치 제출
• Queue(대기열) 작업 영역
• Status(상태) 및 Data acquisition(데이터 수집) 패널
• 자동 검량
• 결정 규칙

관련 장비: 4500, 5500, 5500+, 6500, 6500+, 7500, X500R, X500B, ZenoTOF 7600 시스템

관련 소프트웨어: SCIEX OS 소프트웨어

인증 유형: 완료

PACE 승인: 없음

이 입문자용 e러닝 강좌에서는 SCIEX OS 소프트웨어의 기능을 간략하게 설명합니다.

이 강좌를 이수한 후에는 다음을 할 수 있어야 합니다.

• 편리하게 SCIEX OS 소프트웨어 탐색
• SCIEX OS 소프트웨어의 각 작업 공간 기본 기능 이해
• 각 작업 공간에서 기본 작업 수행

장: 1
인증 유형: 완료
PACE 승인: 없음

이 과정은 SCIEX OS 소프트웨어와 함께 ZenoTOF 7600, X500R 및 X500B QTOF 시스템을 사용하는 방법에 대한 기본 사항을 다루며 안전 및 실험실 요구 사항, 이동상 및 표준 준비, 최적화 및 데이터 분석의 4개 모듈로 구성됩니다.

• 안전 및 실험실 요구 사항, 이동상 및 표준 준비에서는 적절한 실험실 안전 절차, 시스템 준비 방법, 이동상 및 샘플을 다룹니다.
• LC-MS/MS는 질량 분석기의 조정 및 교정, acquisition 방법 생성, 배치 생성 및 제출을 다룹니다.
• 데이터 분석은 TOF MS 및 IDA 데이터를 처리하고 검토하는 방법을 보여줍니다.

필요한 경우 왼쪽의 리소스 섹션에서 데이터 처리 연습으로 사용할 예제 데이터를 찾을 수 있습니다.

관련 장비: X500R, X500B, ZenoTOF 7600 systems

관련 소프트웨어: SCIEX OS software

인증서 유형: 완료

PACE 인증: 없음

이 프리젠테이션의 목적은 SCIEX QTRAP 장비 초보자가 Linear Ion Trap 시험법을 만드는 방법을 소개하기 위함입니다. 사용자가 시험법 개발 중에 알아야 하는 사항도 소개합니다.

이 자가 주도형 교육 세션은 질량 분석법, 이온 형성, 질량 분석기 및 검출기 사용을 포함한 새로운 사용자의 질량 분석법 기초를 설명합니다. 이 과정의 PACE 인증과 PACE 승인(1 PACE 그레딧과 동일)을 얻고자 하는 학습자는 반드시 학습 모듈을 이수하고 간단한 온라인 평가 질문을 통과해야 합니다.

장: 1
인증 유형: 완료
Pace 승인: 있음

이 강좌는 SCIEX Triple Quadrupole 및 QTRAP 시스템의 일반적인 유지관리 및 문제해결을 사용자에게 설명하기 위해 계획되었으며, 다음 주제로 구성되어 있습니다.
- MS 데이터 분석, 이온 소스, ESI 프로브 및 APCI 프로브 등의 시스템 숙련도
- SCIEX 기술 지원 및 서비스(Technical Support and Service) 그룹에 보고된 가장 많이 발생한 최상위 문제 10개
- 가장 많이 발생하는 공통 신호 관련 문제 및 컴퓨터와 통신 관련 문제와 이를 해결하는 방법을 설명하는 문제 및 문제해결 섹션
- 권장 유지관리 작업 및 모범 사례를 설명하는 유지관리 

시간: 30분
학습자 수준:  중급
인증 유형: 완료
PACE 승인: 없음

이 e 러닝시리즈는기본정량워크플로우를위해 SCIEX triple quadrupole 및 QTRAP 시스템 (연구목적시스템만해당)을사용하는방법을사용자에게가르쳐주기위한과정입니다.안전및실험실요구사항, 이동상및시료준비, 최적화및데이터수집및데이터분석의네가지모듈로구성됩니다. 안전및실험실요구사항, 이동상및시료준비에는적절한실험실안전절차, 시스템준비방법, 이동상및샘플이포함됩니다. 최적화및데이터수집은수집방법을생성하기위한컴파운드및소스최적화그리고와데이터수집방법을다룹니다.데이터분석은데이터처리방법작성, 데이터처리및검토, MultiQuant 또는 SCIEX OS-MQ 소프트웨어를사용하여보고서를생성하는방법을보여줍니다.필요한경우왼쪽의리소스섹션에서데이터처리를위한실습으로사용할예제데이터를찾을수있습니다.

챕터: Four (4)
인증 유형 : 완료
PACE 인증 : 아니오

이 강좌는 SCIEX TripleTOF® 시스템 사용 방법에 대한 기본 사항을 설명하고 안전 및 실험실 요구 사항, 준비, 최적화 및 데이터 분석 등 4가지 모듈로 구성되어 있습니다.
안전 및 실험실 요구 사항과 준비에서는 적절한 실험실 안전 절차와 시스템, 이동상, 시료 준비 방법을 설명합니다.  
최적화 및 데이터 수집에서는 SCIEX TripleTOF 시스템을 조정 및 보정하고, 실험법을 만들고, 배치를 생성/제출하는 방법을 설명합니다. 
데이터 분석에서는 Analyst® TF, PeakView^TM 및 SCIEX OS 소프트웨어를 사용하여 TOF MS, 생성물 이온 및 IDA 데이터를 검토하는 방법을 상세하게 설명합니다.

필요한 경우 왼쪽의 리소스 섹션에서 예제 데이터를 찾아 데이터 처리 실습에 사용할 수 있습니다. 

장: 총 4장
기간: 각 온라인 강좌마다 20분
강좌 수준: 기초
인증 유형: 완료
PACE 승인: 없음

이 교육에서는 SCIEX의 triple quadrupole과 QTRAP 질량분석 시스템의 프론트 엔드 클리닝 방법을 학습하실 수 있습니다.

• 이 코스에서 다루는 주제:
• 프론트엔드 구성품 개요
• 청소 팁
• 커튼과 오리피스 플레이트, 스키머와 이온 가이드 클리닝 방법

관련 시스템: 3200, 3200 MD, 4000, 3500, 4500, 4500 MD, 5500, 5500+, 6500, 6500+, Citrine, 7500 systems

관련 소프트웨어: Analyst, Analyst MD and SCIEX OS software

코스 종료: 완성

이 강좌에서는 TOF (Time of Flight) 질량 분석법의 이론과 응용 분야를 설명합니다. 이 강좌를 이수하면 다음을 수행할 수 있습니다.

(한국어 자막은 왼쪽 플레이어의 메뉴 옆 메모 섹션에 있습니다)

• TOF (Time of Flight) 질량 분석법의 응용 분야와 이점을 식별할 수 있습니다.
• TOF 질량 분석법 원리를 자세하게 설명할 수 있습니다.
• Accurate Mass의 정의와 응용 분야를 파악할 수 있습니다.

장: 1
인증 유형: 완료

이 교육 세션에서는 Triple Quadrupole 및 Linear Ion Trap 이론, SCIEX 질량 분석기에서의 스캔과 작동을 설명합니다. 이 강좌 이수에 대한 PACE 인증서와 PACE 승인 획득(PACE 크레딧 한 개(1)와 동일)에 관심 있는 학습자는 학습 모듈과 간단한 온라인 평가 조사를 성공적으로 완료해야 합니다.

기간: 약 40

이 교육 과정은 액체 크로마토그래피에 익숙하지 않은 사용자에게 HPLC 기본 지식을 이해하는 데 도움을 주기 위해 고안되었습니다. 본 과정에서는 다음과 같은 주제를 다룹니다.

-기본 HPLC 시스템 구성 요소 및 그 기능 -공통 분리 모드 및 그 적용
PACE 인증서 및 PACE 인증을 받고자 하는 학습자는 본 교육 과정에 참여하기 위해 (PACE 크레딧과 동일) 학습 모듈 및 간단한 온라인 평가인 퀴즈 문제를 성공적으로 이수해야 합니다.

인증서 발급: 가능
PACE 인증서: 가능

이 과정은 MasterView 소프트웨어를 사용하여 QTRAP 데이터를 처리하는 방법을 설명합니다. 이 과정을 이수하면 성공적으로 수집 및 프로세싱 방법을 만들고 MasterView에서 프로세싱 결과를 검토할 수 있습니다.

이 교육 과정을 수강한 후 사용자는 다음을 할 수 있습니다.
- Analyst 소프트웨어에서 Scheduled MRM-IDA-MS/MS 수집 방법 생성
- MS/MS 라이브러리를 MasterView 소프트웨어에 가져오기
- MasterView 소프트웨어에서 QTRAP MS/MS 라이브러리 검색을 위한 프로세싱 방법 생성
- MasterView 소프트웨어에서 Scheduled MRM-IDA-MS/MS 데이터 처리
- 결과 보고 및 필터링
- MultiQuant 소프트웨어에서 좀 더 처리하기 위해 결과 보고 및 프로세싱 매개변수 내보내기

장: 1
인증 유형: 완료
PACE 승인: 없음

이 강좌에서는 분석법 개발에 사용할 수 있는 여러 가지 유형의 컬럼 선택성을 중점으로 설명합니다.

이 강좌를 수강한 후 학습자는 다음을 할 수 있습니다.
- 컬럼 선택성에 영향을 미치는 여러 가지 요인 파악
- C18, C8, C4, 페닐 및 PFP 유형 역상 컬럼 간 차이점 이해
- 순상, 극성 기능군 및 HILIC 선택성을 비롯한 극성 분석물 선택성 이해

장: 1
인증 유형: 완료
PACE 승인: 없음

This course introduces the subject of reverse phase mobile phases in method development. In this module, we will be focusing on the choice of solvents, mobile phase pH and buffers, isocratic vs. gradient systems and column temperature.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

이 강좌 모듈에서는 고성능 액체 크로마토그래피(HPLC) 시스템을 사용하는 분석 작업을 토대로 이동상 준비와 질량 분석기(MS)용 LC 펌프 설치에 대한 기본 사항을 검토합니다. 여기에서는 HPLC 시스템의 구성 요소에 대한 간략한 개요와 프라이밍 LC 펌프의 일반적인 팁을 설명합니다. MS 등급 시약과 측정 장비의 올바른 사용을 중점으로 설명합니다. 이 강좌 모듈 끝에는 사용자의 이해 정도를 테스트하기 위한 짧은 퀴즈가 있습니다.

이 강좌에서는 신규 사용자에게 질량 분석법 응용 분야, 이온 형성, mass analyzer 및 검출기를 포함하여 질량 분석법 기초를 설명합니다. 이 강좌를 수강한 후에는 다음을 할 수 있어야 합니다.

•  질량 분석기에서 다양한 분자를 구별하는 데 분자 질량을 사용하는 이유를 설명합니다.
• 질량 분석기의 주요 구성 요소를 식별하고 해당 기능을 설명합니다.
• 질량 스펙트럼 데이터 유형에 제공되는 정보를 지정합니다.
• 질량 분석법에서 가장 중요한 매개변수를 정의합니다.
• 질량 분석기 유형 간의 차이점과 이상적인 사용 방법을 설명합니다.
• 질량 분석법에서 발생할 수 있는 문제 설명 및 이를 해결하는 방법에 대한 예시 제공

관련 장비: 3200, 3200MD, 4000, 4500, 4500MD, 5500, 5500+, 6500, 6500+, Citrine, 7500, TripleTOF 4600+, TripleTOF 5600, TripleTOF 5600+, TripleTOF 6600, TripleTOF 6600+, X500R, X500B 및 ZenoTOF 7600 시스템

관련 소프트웨어: Analyst, Analyst MD, Analyst TF 및 SCIEX OS 소프트웨어

인증 유형: 완료

이 과정에서는 질량 분석에 의한 정량의 기본을 소개할 것입니다. 이 과정에서는 다음 항목을 다룰 것입니다:

• 왜 질량 분석기를 사용합니까?
• 보정 곡선은 어떻게 수행합니까?
• 어떤 품질 매개변수를 고려해야 합니까?
  

관련 기기 : 3200, 3200 MD, 4000, 3500, 4500, 4500 MD, 5500, 5500+, 6500, 6500+, Citrine, 7500, TripleTOF 6600+, TripleTOF 6600, TripleTOF 5600, TripleTOF 5600+, TripleTOF 4600, TripleTOF 4600+, X500R QTOF및 ZenoTOF 7600 시스템
관련 소프트웨어: MultiQuant, Analyst, Analyst MD 및 SCIEX OS 소프트웨어
인증서 유형: 가능
PACE 인증: 없음

이 자가주도형, 온라인 교육 과정은Triple Quadrupole시스템과 QTRAP® 시스템 사용자에게 실험 감도를 향상시킬 수있는 실질적인 제안을 제공합니다.

과정 레벨 : 기초
교육 시간 : 약 20분

This course explains essential topics regarding how to use the Analyst Administrator Console (AAC) and the following topics are included:

• Overview of the Analyst Administrator Console (AAC).
• How to use the software to perform different functions

Related instruments: 3200, 3500, 4000, 4500, 5500, 5500+, 6500, 6500+ systems

Related software: Analyst software

Certificate type: Completion

PACE accreditation: None

Сессия для самостоятельного изучения фокусируется на основах использования программного обеспечения Analyst и Analyst MD для оптимизации соединений и параметров источника ионизации/газов для тройных квадруполей и систем QTRAP. Включает в себя демонстрацию ручной оптимизации соединений и параметров источника ионизии/газов. Также во время сессии будет рассмотрена автоматическая оптимизация соединений с помощью метода инфузии и метода проточно-инжекционного анализа (ПИА).

Глава: 1

本课程将向您介绍Analyst TF软件，并对该软件及其功能进行概述。

完成课程后，将能够：

-创建硬件配置文件

-优化仪器

-了解MS/MS^ALL SWATH^TM、IDA和MRM ^HR扫描类型

-创建TOF MS 和IDA方法

-创建和提交批次

-浏览数据

证书类别: 结课

このコースでは、Analyst^® TF ソフトウェアの概要とその機能についてご紹介します。

• Hardware Profileの作成
• Instrument Optimizationの実行
• SWATH AcquisitionによるMS/MSALLやIDA、MRMHRスキャンに関する理解
• Method Wizardを使ったMethodの作成
• TOF MS および IDA Methodの作成
• Batchの作成とSubmit
• データの表示・閲覧

チャプター数 : 1
コース修了認定証 : 有り
P.A.C.E. 認定対象 : 対象外

本トレーニングコースはAnalystおよびAnalyst MDソフトウェアで制御する四重極およびQTRAP装置における基本的な化合物とイオンソース/ガスの最適化に焦点を当てた内容で、受講者のペースで進めていただけます。インフュージョンを用いて手動で行うこれらのパラメータの最適化について説明されており、加えてFIAモードで行う化合物パラメータ自動最適化のプロセスもカバーされています。

This course will give you an overview of Analyst and Analyst MD software. After taking this course, you should be able to:

• Describe the Analyst software structure
• Navigate through the six modes of the software
• Interpret the system status icons
• Identify data file types
• Locate Analyst software tools and help

Related instruments: 3200, 3200MD, 4000, 4500, 4500MD, 5500, 5500+, 6500, 6500+, Citrine  systems

Related software: Analyst and Analyst MD software

Certificate type: Completion

PACE accreditation: Yes

Learners interested in obtaining a PACE certificate and PACE accreditation for taking this course (equal to 0.5 PACE credit) must successfully complete the learning module and a brief online evaluation survey.

SCIEX is approved (or has applied for approval) as a provider of continuing education programs in the clinical laboratory sciences by the ASCLS P.A.C.E. ® Program.

このコースは、セルフペース型のトレーニングプログラムです。トリプル四重極およびQTRAP装置の分解能と質量精度の調整を行うための基本的なAnalystおよびAnalyst MDソフトウェア操作に焦点を当てご説明しています。
含まれるトピックは次のとおりです。：
必要な試薬
手動による分解能と質量精度の確認
手動による分解能補正と質量精度補正
Instrument Optimization機能を用いた自動キャリブレーション
自動キャリブレーションの結果とそのレポートについて

このコースは、セルフペース型のトレーニングプログラムです。操作にまだ慣れておられないユーザー様向けに、AnalystおよびAnalyst MDソフトウェアの基本的な操作方法をご紹介しています。トピックには以下の内容を含みますが、これらだけに限りません。：ソフトウェアインターフェースの概要、Projectフォルダとその構造、System Status（システムステータス）アイコン、ソフトウェアの5つのモード、Helpの位置、Hardware Profile（ハードウェアプロファイル）の設定、セキュリティー設定やAudit Trail（監査証跡）機能、基本的なコンピュータメンテナンス。このコースを受講してPACEの証明書・修了証とPACE認定（0.5 PACEクレジットに相当）を取得したい方は、モジュールの学習を終え、習得度を確認するクイズに合格してください。

このトレーニングコースでは、AnalystとAnalyst MDソフトウェアを利用したAcquisition Methodの作成とデータ取得に焦点を当てご紹介します。以下のトピックを含みます。：
- 基本的なAcquisition Methodの作成方法、Scheduled -ionization機能、Scheduled MRM(sMRM)、複数のPeriodやIDA Experimentを含む応用的なAcquisition Methodの作成方法
- Acquisition Batchの作成方法
- Batch のQueue（キュー）へのSubmit方法
- データ取得の開始方法

コース修了認定証： 有り
P.A.C.E. 認定対象: 対象外

このコースでは、Analyst および Analyst MD ソフトウェアの Explore モードでデータファイルを処理するための基本的な機能をご紹介します。このコースでは、データファイルの開き方、グラフを拡大する方法、バックグラウンドの減算、スペクトルの表示方法、抽出イオンクロマトグラムの表示方法、データのスムージング方法、グラフのラベリング、便利なスクリプト、Fragment Interpretation Toolなどの基本的な機能をご紹介します。

チャプター数：1
コース修了認定証： 有り
P.A.C.E. 認定対象: 対象外

本自助学习课程是针对新用户的Analyst软件的基础培训。课程内容包括以下内容的详细介绍：

• Analyst用户界面概览 - 项目文件夹及其结构、系统状态图标
• Analyst软件模块功能介绍 - 硬件配置、调谐和校准、建立采集方法和批次、Explore、定量
• 计算机维护的注意事项

This eLearning course will cover the basic operation and maintenance for the CESI 8000 Plus system. After completing this course, you should be able to:

• Understand the different modes of operation for CESI-MS
• Understand the appropriate parameters and instrument settings for connecting the CESI 8000 Plus system to an MS System
• Be familiar with different capillary types
• Perform basic maintenance on your system

Related instruments: CESI 8000 Plus system

Related software: 32 Karat software and CESI 8000 software

Certificate type: Completion

PACE accreditation: None

This course explains what electron activated dissociation (EAD) is and its features and benefits for your workflows.

It covers the following topics:

• The basics of EAD
• How to tune and create EAD methods using SCIEX OS software
• The advantages and benefits of using EAD for different types of workflows

Related instruments: ZenoTOF 7600 system

Related software: SCIEX OS software

Certificate type: Completion

PACE accreditation: None

This course is designed to help you to operate an LC system correctly and mainly discusses the use of LC when combined with a mass spectrometer (LC-MS). It covers the following topics:

• Preparation of mobile phases and other solvents
• Appropriate tubing to use and connection to the MS and column
• Operation of the autosampler
• Checklist for system start up
• Checklist for system shutdown

Related instruments: ExionLC AE system

Related software: Analyst, Analyst TF, Analyst MD and SCIEX OS software

Certificate type: Completion

PACE accreditation: None

Dieser Kurs soll Ihnen helfen, ein LC-System korrekt zu bedienen. Er erläutert hauptsächlich die Verwendung von LC in Kombination mit einem Massenspektrometer (LC-MS). Folgende Themen werden behandelt:

• Vorbereitung von mobilen Phasen und anderen Lösungsmitteln
• Verwendung geeigneter Schläuche und Anschlüsse an das MS und die Säule
• Betrieb des Autosamplers
• Checkliste für das Hochfahren des Systems
• Checkliste für das Herunterfahren des Systems

Zugehörige Instrumente: ExionLC AE system

Zugehörige Software: Analyst, Analyst TF, Analyst MD und SCIEX OS software

Zertifikatstyp: Abschluss

PACE-Akkreditierung: Keine

This course covers how to use the front panel of the BioPhase 8800 system for data acquisition and covers the following topics:

• Orientation of the front panel of the BioPhase 8800 system
• Ribbon and status panel
• Acquisition functions
• Management functions

Note: This course does not include method creation or project management.

Related instruments: BioPhase 8800 system

Related software: None

Certificate type: Completion

PACE accreditation: None

This course gives you an introduction to the BioPhase 8800 system and discuss its features and benefits. The course covers the following topics:

• Overview of the BioPhase 8800 system
• Features and benefits of the system
• Examples of use such as CE-CDS analysis, cIEF analysis and AAV Capsid analysis

Related instruments: BioPhase 8800 system

Related software: BioPhase software

Certificate type: Completion

PACE accreditation: None

本课程为BioPhase 8800系统的基础介绍课程，课程将讨论系统的功能和优势。以下主题将在课程中讲解：

• BioPhase 8800系统概览
• 系统的特点和优势
• 应用实例，如CE-SDS 分析，cIEF分析和AAV衣壳分析

章节数：1

证书类型：结课

本课程为Biologics Explorer软件的介绍课程，课程内容涵盖以下主题:

• Biologics Explorer 软件概述
• 运行工作流程(workflows)
• 管理工流程
• 帮助和工具

完成本课程后，学习者将能够理解：

• 通过 Biologics Explorer 软件进行数据处理的基本原理
• 在软件中如何开始
• 如何使用 Biologics Explorer 软件的工作流程
• 从哪里获得帮助

相关仪器：TripleTOF 4600、TripleTOF 5600、TripleTOF 6600、TripleTOF 6600+、 X500R QTOF、X500B QTOF 和 ZenoTOF 7600系统

相关软件：Biologics Explorer 软件

证书类型：结课证书

本在线学习课程将介绍CESI 8000 Plus系统的基本操作和维护。

完成本课程后，学习者将能够：

• 了解CESI-MS的不同操作方式
• 了解CESI 8000 Plus系统连接到MS系统的适当参数和仪器设置
• 熟悉不同的毛细管类型
• 对系统进行基本维护

单元数：1

证书类型：结课

This video will demonstrate how PTMs can be characterized and monitored using a dedicated multi attribute methodology solution in SCIEX OS. 

Chapters: 1
Certificate Type: None
PACE Accreditation: None

This course is an overview of charge heterogeneity based analysis using cIEF and CZE. It is a two part course, and covers the theory of the two assays, sample analysis using the methods, kits and PA 800 Plus system, and finally how to troubleshoot common issues. You must complete Part A before continuing onto Part B.

• Understand the importance of charge heterogeneity characterization
• Describe the relationship between pH and protein charge
• Perform sample analysis using High Performance Capillary Isoelectric Focusing (cIEF)
• Perform sample analysis using Capillary Zone Electrophoresis
• Troubleshoot common issues

Chapters: 2
Certificate Type: Completion
PACE Accreditation: None

This eLearning course will cover several examples of how to create flagging rules and custom columns in SCIEX OS software.

After completing this course, you should be able to:

• Create custom columns
• Create flagging rules using default and custom columns
• Perform data review using flagging rules and custom columns
• Import and export flagging rules into a method.
  

Chapters: 1
Certificate Type: Completion
PACE Accreditation: None

This course introduces you to the SWATH workflow and data processing using the SWATH Acquisition MicroApp.

After taking this training course, you should be able to:

• Understand the SWATH workflow
• Generate ion libraries from discovery data
• Use the SWATH Acquisition MicroApp for comprehensive XIC generation
• Use the SWATH Acquisition MicroApp for data export for further statistical analysis.

Related instruments: 4600, 5600, 6600, 6600+ systems

Related software: Analyst TF software

Certificate type: Completion

PACE accreditation: None

This training module presents the new features and work flow of DiscoveryQuant software 2.1 Analyze. The use of optimized parameters from the DiscoveryQuant software 2.1 Database is described to build Multiple Reaction Monitoring (MRM) acquisition methods. The procedures for DiscoveryQuant software 2.1 Analyze sample batch template creation and sample analysis submission are presented. Data integration and final report generation are also covered.

Chapters: 1
Certificate Type: None
PACE Accreditation: No

This training module presents the new features and work flow of DiscoveryQuant software 2.1 Optimize. Initial hardware and starter method setup are reviewed. Automatic compound optimization through Flow Injection Analysis (FIA) is described including the use of the new QuickTune and FineTune options. Compound review using the DiscoveryQuant software 2.1 Database is also covered.

Chapters: 1
Certificate Type: None
PACE Accreditation: No

本在线学习系列旨在介绍如何使用Echo MS系统进行基本的定量工作流程。课程由四个单元组成:实验室安全须知、实验准备、数据采集和数据分析。

实验室安全须知和实验准备包括适当的实验室安全程序、如何准备系统、流动相和样本。

数据采集包括创建MS和AE方法以及如何采集数据。

数据分析主要演示如何创建处理方法、处理和查看数据、生成报告和执行自动触发的数据处理。

如果需要，在页面上的“资源”标签中可以查看用作数据处理的示例数据。

单元数：4
证书类型：结课

本次线上学习课程将为您介绍Echo MS+与ZenoTOF 7600及6500+系列的联用方案，阐释了AEMS（声波激发质谱）的技术原理与仪器配置。本课程适合熟悉SCIEX质谱产品的学员。

完成课程后，您将有能力完成如下内容：

• 阐述AEMS技术的工作原理
• 描述Echo® MS+系统的各个构成组件
• 配置仪器并查看其运行状态
• 通过仪器控制窗口实现仪器的手动操控

相关仪器: Echo MS+ 系统, ZenoTOF 7600 系统与 6500+ 系统

相关软: SCIEX OS 软件

证书类型: 结课证书

Dieser Kurs führt neue Benutzer in die grundlegende Bedienung der Analyst- und Analyst MD-Software ein. Zu den Themen gehören unter anderem: Die Benutzeroberfläche, Projektordner und ihre Struktur, Systemstatussymbole, die fünf Modi der Software, das Auffinden von Hilfedateien, Hardwareprofile, Audit-Trail und grundlegende Computerwartung.

Zugehörige Instrumente: 3200, 3200 MD, 4000, 3500, 4500, 4500 MD, 5500, 5500+, 6500, 6500+ und Citrine series system

Zugehörige Software: Analyst und Analyst MD software

Zertifizierungsart: Abschluß

Dieser Kurs behandelt die Theorie und Anwendung der Flugzeit-Massenspektrometrie und behandelt die folgenden Themen:

• Flugzeittheorie
• Faktoren, die die Massenauflösung bei bei TOF-MS beeinflussen und technische Verbesserungsmaßnahmen
• Definition der monoisotopischen und durchschnittlichen Masse sowie der Massengenauigkeit
• Scanrate und Massenstabilität in der Flugzeitmassenspektrometrie
• Vorteile und Anwendungen von TOF-Instrumenten

Zugehörige Instrumente: TripleTOF 6600+, TripleTOF 6600, TripleTOF 5600, TripleTOF 5600+, TripleTOF 4600, TripleTOF 4600+, X500R QTOF, X500B QTOF und ZenoTOF 7600 System

Zugehörige Software: Analyst TF und SCIEX OS Software

Zertifizierungsart: Abschluß

Dieser Kurs soll Anwendern, die mit der Flüssigchromatographie (LC) noch nicht vertraut sind, helfen, die wichtigsten Grundlagen zu verstehen, und behandelt die folgenden Themen:

• Grundlagen der Flüssigkeitschromatographie
• Hauptkomponenten des LC-Systems
• Wahl des LC-Methodentyps
• Umkehrphasenchromatographie (Reversed-phase, RP)

Zugehörige Instrumente: ExionLC AE and M5 MicroLC system

Zugehörige Software: Analyst, Analyst TF, Analyst MD and SCIEX OS software

Zertifikatsart: Abschluß

Dieser Kurs behandelt die Grundlagen der Massenspektrometrie für neue Benutzer, einschließlich ihrer Anwendungen, der Ionenbildung, der Massenanalysatoren und Detektoren. Nach dem Absolvieren dieses Kurses sollten Sie:

• Erklären können, warum Massenspektrometer die Molekülmasse zur Unterscheidung verschiedener Moleküle nutzen
• Die Hauptkomponenten eines Massenspektrometers zu identifieren und deren Funktion zu beschreiben
• Angeben können, welche Informationen in massenspektralen Datentypen enthalten sind
• Die wichtigsten Parameter der Massenspektrometrie definieren können
• Die Unterschiede zwischen den Massenspektrometertypen und ihre ideale Verwendung beschreiben können
• Die Herausforderungen beschreiben, die bei der Massenspektrometrie auftreten können, und Beispiele für deren Bewältigung nennen können

Zugehörige Instrumente: 3200, 3200MD, 4000, 4500, 4500MD, 5500, 5500+, 6500, 6500+, Citrine, 7500, TripleTOF 4600+, TripleTOF 5600, TripleTOF 5600+, TripleTOF 6600, TripleTOF 6600+, X500R, X500B and ZenoTOF 7600 systems

Zugehörige Software: Analyst, Analyst MD, Analyst TF and SCIEX OS software

Zertifizierungstyp: Abschluß

Dieser Kurs führt Sie in die Grundlagen der Quantifizierung mittels Massenspektrometrie ein. Er behandelt die folgenden Themen:

• Warum Massenspektrometrie für die Quantifizierung nutzen?
• Wie erstellt man eine Kalibrierkurve?
• Auf welche Qualitätsparameter sollten Sie achten?

Zugehörige Instrumente: 3200, 3200 MD, 4000, 3500, 4500, 4500 MD, 5500, 5500+, 6500, 6500+, Citrine, 7500, TripleTOF 6600+, TripleTOF 6600, TripleTOF 5600, TripleTOF 5600+, TripleTOF 4600, TripleTOF 4600+, X500R QTOF und ZenoTOF 7600 system

Zugehörige Software: MultiQuant, Analyst, Analyst MD und SCIEX OS software

Zertifizierungsart: Abschluß

Dieser Kurs bietet eine Einführung in die Triple-Quadrupol- und lineare Ionenfallentheorie, die zugehörigen Scans und den Betrieb von SCIEX-Massenspektrometern.

Zugehörige Instrumente: 3200, 3200MD, 4000, 4500, 4500MD, 5500, 5500+, 6500, 6500+, Citrine, 7500 systems

Zugehörige Software: Analyst, Analyst MD and SCIEX OS software

Zertifizierungsart: Abschluß

This eLearning course will walk you through the maintenance and troubleshooting of Eksigent expert microLC 200 system. You have the option to advance to any specific topic of interest.

Chapters: 1
Certificate Type: None
PACE Accreditation: No

The Eksigent NanoLC course is designed to provide a primer on how to use the NanoLC system in their experimental workflows and how to address common pitfalls that can arise when using the instrument, especially during the familiarization stages of its use.  It is assumed the user has a working knowledge of mass spectrometry and high flow LC.  The course is intended to help the new user set up the NanoLC instrument, design methods, run samples using the LC and troubleshoot common problems.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

This learning path for the ExionLC 2.0 and 2.0+ systems covers the use and maintenance of your LC system. Upon completion of the learning path, you should be able to successfully use your instrument for your workflow.

This learning path for the ExionLC AE system covers the use and maintenance of your LC system. Upon completion of the learning path, you should be able to successfully use your instrument for your workflow.

本在线学习课程是 ExionLC AE 系统的描述讲解并包含如何使用。涵盖以下内容：

• 系统概览
• 设备配置
• LC 方法建立
• 批次创建
• 推荐操作

完成本课程后，学习者将能够：

• 配置系统
• 通过设备控制面板和系统控制面板手动控制系统
• 描述创建LC方法时要使用的适当参数设置
• 创建并提交一批样品进行分析
• 使用前对系统进行purge和平衡
• 使用推荐操作进行溶液和样品板的准备

相关仪器: ExionLC AE 系统

相关软件: SCIEX OS 软件

证书类型: 结课

本系列为介绍 ExionLC AE、岛津LC-40和LC-40 CL系统的快速维护系列，涵盖如何执行简单的仪器维护任务。视频中的任务可能会使用不同的模型进行演示，对于列出的所有适用系统，操作过程是相同的。

泵

• 拆卸泵头
• 清洗泵头和止回阀
• 更换高压密封圈
• 更换柱塞和隔板
• 安装泵头
• 更换内部过滤器
• 更换吸液过滤器

自动进样器

• 为不同类型进样板调整针位置
• 拆卸高压阀
• 更换高压阀转子和定子
• 安装高压阀
• 拆卸低压阀
• 更换低压阀转子和定子
• 泵柱塞和密封圈的更换
• 更换针密封圈
• 换针
• 调整进样口
• 重置使用计数器

换板器

• 清洗换板器通气过滤器

检测器

• 重建流通池

相关仪器：ExionLC AE、岛津 LC-40 和 LC-40 CL 系统

相关软件: Analyst 软件和 SCIEX OS 软件

证书类型：无

This course will show you how to clean the front end components of your TripleTOF system. It will demonstrate the following procedures:

• Routine cleaning of the curtain and orifice plate without venting the system
• Full cleaning of the QJet ion guide, curtain and orifice plate by venting the system

Related instruments: TripleTOF 4600+, 5600, 5600+, 6600+ systems

Related software: Analyst TF software

Certificate type: Completion

PACE accreditation: None

This course covers how to clean the front end components for SCIEX triple quadrupole and QTRAP mass spectrometer systems. It includes best practices to follow when cleaning your system and how to prevent frequent full front end cleaning.

The following topics are covered during the course:

• Overview of the front end components for your system
• Routine cleaning procedure to clean the curtain plate
• Full cleaning procedure to clean the curtain plate, orifice plate and skimmer and ion guides

This certificate for this course will expire after 1 year. At this time, you can re-enroll in the course to retake the knowledge assessment. 

Related instruments: 3200, 3200MD, 4000, 3500, 4500, 4500MD, 5500, 5500+, 6500, 6500+, Citrine, 7500 and 7500+ systems

Related software: Analyst, Analyst MD and SCIEX OS software

Certificate type: Completion (expires after 1 year)

PACE accreditation: None

Khóa học eLearning này sẽ giới thiệu tổng quan về các chức năng trong SCIEX OS.

Sau khi hoàn thành khóa học này, bạn sẽ:
• Điều hướng thông qua SCIEX OS
• Hiểu chức năng chính của từng vùng làm việc trong SCIEX OS
• Thực hiện các tác vụ cơ bản trong từng không gian làm việc

Số chương: 1
Loại chứng chỉ: Hoàn thành
Chứng nhận PACE: Không

Khóa học này được thiết kế để giúp người dùng chưa quen với sắc ký lỏng hiểu những kiến thức cơ bản về HPLC. Khóa học bao gồm các chủ đề sau;
- Các thành phần cơ bản của hệ thống HPLC và chức năng của chúng
- Lý thuyết LC cơ bản cho các pha tĩnh và pha động khác nhau
- Các chế độ phân tách phổ biến và ứng dụng của chúng
- Độ phân giải trong sắc ký và cách thay đổi nó.

Những người học muốn đạt được chứng chỉ PACE và chứng nhận PACE để tham gia khóa học này (bằng 1 tín chỉ PACE) phải hoàn thành tốt mô-đun học tập và một bài khảo sát đánh giá trực tuyến ngắn gọn.

Số chương: 1
Loại chứng chỉ: Hoàn thành
Chứng nhận PACE: Có

Khóa học này bao gồm lý thuyết và ứng dụng của khối phổ Thời gian bay. Sau khi hoàn thành khóa học, bạn sẽ có thể:
- xác định các ứng dụng và lợi ích của khối phổ Thời gian bay (TOF)
- giải thích các nguyên tắc của phép đo khối phổ TOF ở mức độ cao
- hiểu định nghĩa và ứng dụng của khối lượng chính xác

Số chương: 1
Loại chứng chỉ: Hoàn thành
Công nhận PACE: Không

Buổi tự đào tạo này sẽ cung cấp những kiến thức cơ bản về khối phổ cho người mới dùng bao gồm việc sử dụng phổ khối, tạo ion, bộ phận phân tích khối và đầu dò. Những người học quan tâm đến việc có được chứng chỉ PACE và chứng nhận PACE để tham gia khóa học này (tương đương với 0,5 chứng chỉ PACE) phải hoàn thành mô-đun học tập và khảo sát đánh giá trực tuyến tóm tắt.

Chương: 1
Loại chứng chỉ: Hoàn thành
PACE Công nhận: Đúng

Khóa học giới thiệu chủ đề dựa trên LC-MS để xác nhận sàng lọc hợp chất sử dụng công nghệ hệ thống QTRAP của hang AB SCIEX. Sau khi hoàn thành khóa học, người học sẽ có thể tạo ra một phương pháp chạy mẫu, tạo một lô chạy mẫu, xử lý dữ liệu và tạo một báo cáo.

Khóa học bao gồm các chủ đề sau:
- Giới thiệu về quy trình sàng lọc hợp chất
- Tổng quan về hệ thống LC-MS / MS
- Tổng quan về  quy trình làm việc  của thu nhận thông tin phụ thuộc (Information Dependent Acquisition / IDA) 
- Cách xây dựng phương pháp MRM-IDA theo cách thủ công và sử dụng Trình hướng dẫn IDA
- Cách gửi một lô, xử lý dữ liệu và tạo báo cáo sàng lọc tổng hợp

Chương: 1
Loại chứng chỉ: Hoàn thành
PACE Công nhận: Không

Dieser Kurs erklärt, was elektronenaktivierte Dissoziation (EAD) ist und welche Besonderheiten und Vorteile es für ihren Workflow bietet. 

Er enthält folgende Themen:

• Grundlagen von EAD
• Wie man EAD Methoden in SCIEX OS software kreiert und einstellt
• Vorteile und Nutzen von EAD für unterschiedliche Workflows

Zugehörige Instrumente: ZenoTOF 7600 system

Zugehörige Software: SCIEX OS software

Zertifizierungsart: Abschluß

Ce cours est conçu pour présenter à l'utilisateur certains problèmes courants de maintenance et de dépannage pouvant survenir sur les systèmes SCIEX Triple Quadrupôle et QTRAP. Il comprend les sujets suivants :
- Familiarisation avec le système de l'analyse des données MS, de la source d'ions et des sondes ESI et APCI
- Les dix problèmes les plus courants signalés à notre groupe d'assistance technique et de service
- Section des problèmes et de dépannage détaillant les problèmes les plus courants liés au signal, à l'ordinateur et à la communication et comment les résoudre
- La maintenance englobe les tâches de maintenance recommandées et les meilleures pratiques

Chapitres : 1
Type de certificat: Achèvement
Accréditation PACE: Aucun

• Familiarización del sistema de análisis de datos MS, la fuente de iones, y las sondas ESI y APCI
• Los diez problemas más comunes reportados a nuestro grupo de Servicio y de Soporte Técnico
• Sección de problemas y diagnostico que detalla los problemas más comunes relacionados con la señal, la computadora y la comunicación, y cómo solucionarlos
• El mantenimiento trata de las tareas de mantenimiento recomendadas y las mejores prácticas.

Tipo de certificado: Finalización
Acreditación PACE: No

本培训主要讲解使用高效液相色谱(HPLC)系统进行质谱分析应用中的流动相准备和液相泵设置相关的基础知识。简要概述了高效液相色谱系统的组成，包括清洗LC泵的常规要点。特别强调了试剂和测量设备的正确使用。在本培训的最后附有一个简短的测验。

持续时间: 约10分钟

Khóa học này được thiết kế để giới thiệu cho người dùng một số bảo trì và khắc phục sự cố phổ biến thông thường có thể xảy ra trên các hệ thống khối phổ ba tứ cực và QTRAP. Nó bao gồm các chủ đề sau:
- Làm quen với phân tích dữ liệu hệ thống MS, nguồn ion hóa và đầu dò ESI và APCI
- Mười vấn đề phổ biến nhất đã được báo cáo cho nhóm Dịch vụ và Hỗ trợ Kỹ thuật của chúng tôi
- Chi tiết về một số sự cố và cách khắc phục sự cố phổ biến nhất liên quan đến tín hiệu, máy tính và lỗi liên quan đến kết nối và cách khắc phục
- Bảo trì vượt qua các nhiệm vụ bảo trì được đề xuất và cách thực hành tốt nhất.

Chương: 1
Loại chứng chỉ: Hoàn thành
PACE Công nhận: Không

Khóa học này là tổng quan về công nghệ và tính năng mới được sử dụng trong Hệ thống SCIEX Triple Quad 7500 LC-MS/MS - QTRAP ready. Nó bao gồm các chủ đề sau:
- Chức năng QTRAP ready
- Nguồn Ion OptiFlow Pro
- Công nghệ E Lens
- Dẫn hướng ion D Jet
- Các tính năng và lợi ích của công nghệ mới

Loại chứng chỉ: Hoàn thành
Chứng nhận PACE: Không

This course is an overview of quantitative protein purity analysis using SDS-Gel Capillary Electrophoresis. It covers the theory of the application, separation, and sample analysis using the CE-SDS MW Kit and IgG Purity and Heterogeneity Assay Kit, and finally interpretation of the results. 

• Understand the theory of the application and the separation
• Perform sample analysis using the IgG Purity and Heterogeneity Assay Kit
• Interpret results obtained using the PA 800 Plus System

Chapters:1
Certificate Type: Completion
PACE Accreditation: None

• Componentes básicos del sistema HPLC y sus funciones
• Teoría básica de LC para diferentes fases estacionarias y móviles
• Modos de separación comunes y sus aplicaciones
• Resolución en la cromatografía y cómo se puede alterar

Los alumnos interesados en obtener un certificado PACE y una acreditación PACE por realizar este curso (equivalente a un (1) crédito PACE) deben completar con éxito el módulo de aprendizaje y una breve encuesta de evaluación online.

Tipo de certificado: Finalización
Acreditación PACE: Sí

 En esta sesión de formación a su ritmo se cubren los fundamentos de la espectrometría de masas para nuevos usuarios, incluyendo: usos de la espectrometría de masas, formación de iones, analizadores de masas y detectores. Los alumnos interesados en obtener un certificado PACE y una acreditación PACE por realizar este curso (equivalente a 0,5 créditos PACE) deben completar con éxito el módulo de aprendizaje y una breve encuesta de evaluación en línea.

Tipo de certificado: Finalización
Acreditación PACE: Sí

El curso introduce el tema de búsqueda de compuestos de confirmación basado en LC-MS utilizando la tecnología de los sistemas QTRAP de SCIEX. Al finalizar el curso, los alumnos serán capaces de crear un método de adquisición, enviar una secuencia, procesar datos y crear un informe.

• Introducción al proceso de búsqueda de compuestos
• Visión general de un sistema LC-MS/MS
• Visión general del flujo de trabajo de adquisición dependiente de la información (IDA)
• Cómo construir un método de adquisición MRM-IDA manualmente y utilizando el asistente IDA
• Cómo enviar un lote, procesar los datos y crear un informe de cribado de compuestos

Tipo de certificado: Completion
Acreditación PACE: No

Esta sesión de capacitación proporcionará una introducción a la teoría de triple cuadrupolo, trampa de iones lineal, escaneos y operaciones en espectrómetros de masas SCIEX. Los participantes que estén interesadas en obtener un certificado PACE y una acreditación PACE (equivalente a un (1) crédito PACE) deberán completar con éxito el módulo de aprendizaje y una breve encuesta de evaluación en línea.

Tipo de certificado: Finalización
Acreditación PACE: Si

Ce cours fournira une introduction à la théorie des pièges à ions triples quadripolaires et linéaires, aux balayages et au fonctionnement des spectromètres de masse SCIEX. Les participants intéressés à obtenir un certificat PACE et une accréditation PACE pour suivre ce cours (égal à un (1) crédit PACE) doivent réussir le module d'apprentissage et une brève évaluation des connaissances en ligne.

Chapitres : 1
Type de certificat: Achèvement
Accréditation PACE: Oui

Le cours présente le sujet du criblage des composés de confirmation basé sur la LC-MS utilisant la technologie des systèmes SCIEX QTRAP®. À la fin du cours, vous serez capables de créer une méthode d'acquisition, de soumettre un lot, de traiter des données et de créer un rapport.

• Introduction au processus de criblage des composés
• Présentation d'un système LC-MS/MS
• Vue d'ensemble du flux de travail de l'acquisition dépendante de l'information (IDA)
• Comment construire une méthode d'acquisition MRM-IDA manuellement et à l'aide de l'assistant IDA
• Comment soumettre un lot, traiter les données et créer un rapport de criblage des composés

Chapitres : 1
Type de certificat : Achèvement
Accréditation PACE : Aucune

This course will introduce you to the Analyst TF Software and give you an overview of the software and its functionality.

• Create a hardware profile
• Perform Instrument Optimization
• Understand MS/MS^ALL with SWATH Acquisition, IDA and MRM ^HR scan types
• Create methods using the Method Wizard
• Create TOF MS and IDA methods
• Create and submit batches
• Explore your data

Certificate Type: Completion
PACE Accreditation: None

This course introduces you to the Biologics Explorer software and covers the following topics:

• Overview of Biologics Explorer software
• Running workflows
• Managing workflows
• Help and tools

After taking this course, you should know:

• What the principle of data processing in Biologics Explorer software
• How to get started
• How to work with Biologics Explorer software workflows
• Where to get help

Related instruments: TripleTOF 4600, TripleTOF 5600, TripleTOF 6600, TripleTOF 6600+, X500R QTOF, X500B QTOF, ZenoTOF 7600 systems

Related software: Biologics Explorer software

Certificate type: Completion

PACE accreditation: None

This eLearning course will demonstrate the workflow of ChemoView 2.0 software data processing of MS/MS data acquired from SCIEX Triple Quad and QTRAP system instruments. Users will learn how to define analyte types and sample types; define tests and analytes; define processing methods and review reports.

Related instruments: 3000, 3200, 4000, 4500, 5500, 5500+, 6500, 6500+ systems

Related software: ChemoView software

Certificate type: None

PACE accreditation: None

This elearning course will cover:

• How to use Cliquid software to acquire and process data
• How to create new tests or modify existing tests as an administrator
• How to install purchased iMethods as an administrator
• How to process screening data and create a report

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

This course is designed to help users who are unfamiliar with Liquid Chromatography to understand the basics of HPLC. The course covers the following topics;
- Basic HPLC system components and their functions
- Basic LC theory for different stationary and mobile phases
- Common separation modes and their applications
- Resolution in chromatography and how it can be altered

Learners interested in obtaining a PACE certificate and PACE accreditation for taking this course (equal to one (1) PACE credit) must successfully complete the learning module and a brief online evaluation survey.

Chapters: 1
Certificate Type: Completion
PACE accreditation: Yes

This course gives you an introduction to LC-MS analysis PFAS and is intended for learners who have a basic understanding of chemistry and quantitation by LC-MS. It covers the following topics:

• Overview of PFAS
• LC-MS analysis of PFAS
• Qualitative analysis of PFAS

Related instruments: 3200, 4000, 3500, 4500, 5500, 5500+, 6500, 6500+, 7500, 7500+, TripleTOF 6600+, TripleTOF 6600, TripleTOF 5600, TripleTOF 5600+, TripleTOF 4600, TripleTOF 4600+, X500R QTOF and ZenoTOF 7600 systems

Related software: None

Certificate type: Completion

PACE accreditation: None

This course is intended for learners who are already familiar with LC-MS analysis and now want to analyze synthetic oligonucleotides e.g. ASOs or siRNA. It will cover the following topics:

• Use of synthetic oligonucleotides
• Structure of different types
• Common analysis goals
• Specific aspects and best practices for LC-MS analysis
• Introduction to interpreting mass spectral data

After taking this course, you will be able to explain:

• The chemical nature
• Challenges in LC-MS analysis
• Best practices to achieve optimal results

Related instruments: TripleTOF 4600, 5600, 6500+, 6600, 6600+, X500R, X500B and ZenoTOF 7600 and 7600+ systems

Related software: Molecule Profiler software

Certificate type: Completion

PACE accreditation: None

The course introduces the subject of LC-MS based confirmation compound screening utilizing SCIEX QTRAP systems technology. Upon completion of the course, learners will be able to create an acquisition method, submit a batch, process data, and create a report.

• Introduction to the compound screening process
• Overview of an LC-MS/MS system
• Overview of the Information Dependent Acquisition (IDA) workflow 
• How to build an MRM-IDA acquisition method manually and using the IDA Wizard
• How to submit a batch, process data and creating a compound screening report

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

This course will explain the content covered during the customer familiarization training (CFC) provided by the service engineer during installation of your instrument. It will teach you how to use the SCIEX IVD triple quadrupole and QTRAP systems for a basic quantitative workflow. It consists of four modules: Safety and Lab Requirements, Preparation, Optimization and Data Acquisition, and Data Processing.

• Safety and Lab Requirements and Preparation explain appropriate laboratory safety procedures, how to prepare the system, mobile phases, and samples.
• Optimization and Data Acquisition show you how to perform compound and source optimization to create an acquisition method, and how to acquire data.
• Data Processing details how to create a processing method, process and review data, and generate a report using MultiQuant MD software.

If required, you can find example data to use as practice for data processing in the Resources tab.

Related instruments: 3200MD, 4500MD, Citrine systems

Related software: Analyst MD, MultiQuant MD software

Certificate type: Completion

PACE accreditation: None

This eLearning course will explain the content covered during the customer familiarization training (CFC) provided by the service engineer during installation of your instrument. It covers the basics of how to use the SCIEX TripleTOF systems, and is comprised of four modules: Safety and Lab Requirements, Preparation, Optimization, and Data Analysis. 

• Safety and Lab Requirements, and Preparation explain appropriate laboratory safety procedures, how to prepare the system, mobile phases, and samples.  
• Optimization and Data Acquisition shows you how to tune and calibrate the SCIEX TripleTOF system, build methods and create/submit batches. 
• Data Analysis details how to review TOF MS, Product Ion and IDA data using Analyst TF, PeakView and SCIEX OS software.

If required, you can find example data to use as practice for data processing in the Resources tab. 

Related instruments: 4600, 4600+, 5600, 6600, 6600+ systems

Related software: Analyst TF, PeakView and SCIEX OS software

Certificate type: Completion

PACE accreditation: None

This eLearning course will explain the content covered during the customer familiarization training (CFC) provided by the service engineer during installation of your instrument. It will teach you how to use the SCIEX triple quadrupole and QTRAP systems (RUO systems only) for a basic quantitative workflow. It consists of four modules: Safety and Lab Requirements, Mobile Phase and Standards Preparation, Optimization and Data Acquisition, and Data Analysis.

• Safety and Lab Requirements, and Mobile Phase and Standards Preparation explains appropriate laboratory safety procedures, how to prepare the system, mobile phases, and samples;
• Optimization and Data Acquisition shows you how to perform compound and source optimization to create an acquisition method, and how to acquire data;
• Data Analysis shows you how to create a processing method, process and review data, and generate a report using MultiQuant or SCIEX OS-MQ software

If required, you can find example data to use as practice for data processing in the Resources tab.

Related instruments: 3000, 4000, 3500, 4500, 5500, 5500+, 6500, 6500+, 7500 systems

Related software: Analyst, MultiQuant and SCIEX OS software

Certificate type: Completion

PACE accreditation: None

This eLearning course will explain the content covered during the customer familiarization training (CFC) provided by the service engineer during installation of your instrument. It covers the basics of how to use the ZenoTOF 7600, 7600+, X500R and X500B QTOF systems with SCIEX OS software, and is comprised of four modules: Safety and Lab Requirements, Mobile Phase and Standards Preparation, Optimization, and Data Analysis.

• Safety and Lab Requirements and Mobile Phase and Standards Preparation explain appropriate laboratory safety procedures, how to prepare the system, mobile phases, and samples;
• LC-MS/MS shows you how to perform tuning and calibration of the mass spectrometer, creation of acquisition methods, and creation and submission of batches.
• Data Analysis shows you how to process and review TOF MS and IDA data

If required, you can find example data to use as practice for data processing in the Resources tab.

Related instruments: X500R, X500B, ZenoTOF 7600 and 7600+ systems

Related software: SCIEX OS software

Certificate type: Completion

PACE accreditation: None

This is a general overview of the MetabolitePilot software and its functionality, including use of the Compound Library, working with Biotransformations, setting up Processing Parameters, creating a Processing Batch in the Batch Workspace, reviewing the Results Workspace – including an overview of the Interpretation feature, and comparing data in the Correlation Workspace. Report generation and troubleshooting is also addressed.;

This eLearning course explains QTRAP technology in more detail and covers the following topics:

• How ions are trapped
• How different LIT scans work
• Important method parameters

Related instruments: 4500, 5500, 5500+, 6500, 6500+, 7500 systems

Related software: Analyst and SCIEX OS software

Certificate type: Completion

PACE accreditation: None

This course introduces you to SWATH and Zeno SWATH data acquisition and covers the following topics:

• Principle of SWATH and Zeno SWATH data independent acquisition
• Different aspects of SWATH acquisition and data analysis
• Benefits of a SWATH method and potential applications

Related instruments: 4600, 5600, 6600, 6600+, X500R, X500B, ZenoTOF 7600 systems

Related software: Analyst TF and SCIEX OS software

Certificate type: Completion

PACE accreditation: None

This course is intended to cover the theory of Differential Mobility Separation (DMS) Technology and how to use the SelexION device with your mass spectrometer.

• Understand the theory of DMS and DMS method parameters
• Install the SelexION device and equilibrate the system before use
• Optimize DMS method parameters for your analytes
• Perform basic maintenance tasks

• Workflows for Method Development and Routine use
• Cleaning Procedures
• Installation and Removal Procedures

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

This course gives you an introduction to antibodies. After taking this training course, you should be able to:

• Identify the major structural components of antibodies as well as their endogenous function
• Understand the basic interaction between antibodies and their epitopes on antigens
• Identify antibody isotypes, IgG subclasses, and identify the difference between monoclonal and polyclonal antibodies
• Understand the difference of polyclonal and monoclonal antibodies
• Understand why antibodies and antibody drug conjugates are used as therapeutic agents

Related instruments: TripleTOF 6600+, TripleTOF 6600, TripleTOF 5600, TripleTOF 5600+, TripleTOF 4600, TripleTOF 4600+, X500R QTOF, X500B QTOF and ZenoTOF 7600 systems

Related software: Analyst TF and SCIEX OS software

Certificate type: Completion

PACE accreditation: None

This course is designed to help users who are unfamiliar with liquid chromatography (LC) to understand the basics and covers the following topics:

• Fundamentals of liquid chromatography
• LC system main components
• Selection of the LC method type
• Reversed-phase chromatography

Related instruments: ExionLC AE and M5 MicroLC system

Related software: Analyst, Analyst TF, Analyst MD and SCIEX OS software

Certificate type: Completion

PACE accreditation: Yes

Learners interested in obtaining a PACE certificate and PACE accreditation for taking this course (equal to 0.5 PACE credit) must successfully complete the learning module and a brief online evaluation survey.

SCIEX is approved (or has applied for approval) as a provider of continuing education programs in the clinical laboratory sciences by the ASCLS P.A.C.E. ® Program.

This course covers the basics of mass spectrometry for new users including the applications for mass spectrometry, ion formation, mass analyzers and detectors. After taking this course, you should be able to:

• Explain why mass spectrometers use molecular mass to distinguish different molecules
• Identify the main components of a mass spectrometer and describe their function
• Specify what information is given in mass spectral data types
• Define the most important parameters in mass spectrometry
• Describe the differences in mass spectrometer types and their ideal use
• Explain the challenges that can arise in mass spectrometry and give examples of how to tackle them

Related instruments: 3200, 3200MD, 4000, 4500, 4500MD, 5500, 5500+, 6500, 6500+, Citrine, 7500, TripleTOF 4600+, TripleTOF 5600, TripleTOF 5600+, TripleTOF 6600, TripleTOF 6600+, X500R, X500B and ZenoTOF 7600 systems

Related software: Analyst, Analyst MD, Analyst TF and SCIEX OS software

Certificate type: Completion

PACE accreditation: Yes

Learners interested in obtaining a PACE certificate and PACE accreditation for taking this course (equal to 1 PACE credit) must successfully complete the learning module and a brief online evaluation survey. 

SCIEX is approved (or has applied for approval) as a provider of continuing education programs in the clinical laboratory sciences by the ASCLS P.A.C.E. ® Program.

This self-paced training session covers the basics of mass spectrometry for new users including the uses of mass spectrometry, ion formation, mass analyzers and detectors. Learners interested in obtaining a PACE certificate and PACE accreditation for taking this course (equal to 0.5 PACE credit) must successfully complete the learning module and a brief online evaluation survey.

Certificate Type: Completion
Pace Accreditation: Yes

This course is an introduction to microLC and covers the following topics:

• Theory and benefits of microLC such as sampling efficiency, sensitivity improvements and solvent savings
• Modifying your method for microLC such as gradient conditions to use, appropriate injection volumes, how a trap and elute workflow can be beneficial, and best practices to achieve optimal robustness
• System requirements including the pump requirements, and appropriate tubing and electrospray emitter IDs

Related instruments: M5 MicroLC system

Related software: Analyst, Analyst TF and SCIEX OS software

Certificate type: Completion

PACE accreditation: None

This course will introduce you to multiplexing using the Transcend LC systems and explains how to acquire LC-MS data with the Transcend LC systems using Xcalibur and SCIEX OS software.

The following topics are covered:

• What is multiplexing?
• Software setup
• Data acquisition

After taking this course, you should be able to:

• Describe how to use multiple LC channels to reduce sample analysis time
• Explain how the software programs are integrated to perform data acquisition
• Configure the software to support multiplexing systems for data acquisition
• Create acquisition and processing methods
• Create a sample batch for acquisition
• Review the status of sample acquisition in the software

Related instruments: 4500, 5500, 5500+, 6500, 6500+, 7500, X500R QTOF and ZenoTOF 7600 systems

Related software: SCIEX OS software

Certificate type: Completion

PACE accreditation: None

This course will introduce you to the basics of quantitation by mass spectrometry. It covers the following topics:

• Why use mass spectrometry?
• How do you perform a calibration curve?
• Which quality parameters do you need to consider?

Related instruments: 3200, 3200 MD, 4000, 3500, 4500, 4500 MD, 5500, 5500+, 6500, 6500+, Citrine, 7500, TripleTOF 6600+, TripleTOF 6600, TripleTOF 5600, TripleTOF 5600+, TripleTOF 4600, TripleTOF 4600+, X500R QTOF and ZenoTOF 7600 systems

Related software: MultiQuant, Analyst, Analyst MD and SCIEX OS software

Certificate type: Completion

PACE accreditation: None

This eLearning course will give you an introduction to the Echo® MS+ system coupled with the ZenoTOF 7600 and 6500+ systems. It will explain the theory of AEMS and device configuration. It is intended for learners who are already familiar with SCIEX MS systems. 

After completing the course, you should be able to: 

• Explain how AEMS technology works
• Describe the different components of the Echo® MS+ system
• Configure the devices and view their status
• Manually control the devices using the Device Control window

Related instruments: Echo® MS+ system, ZenoTOF 7600 system and 6500+ system

Related software: SCIEX OS software

Certificate type: Completion

PACE accreditation: None

This course introduces you the operating principles of the ExionLC 2.0 Autosampler and describes some best practices to use during acquisition. It covers the following topics:

• Introduction to the ExionLC 2.0 Automsampler
• Differences between fixed loop and flow through needle designs
• Operating principles of the ExionLC 2.0 Autosampler
• Operating modes for the ExionLC 2.0 Autosampler
• Best practices

Related instruments: ExionLC 2.0 and 2.0+ system

Related software: Analyst and SCIEX OS software

Certificate type: Completion

PACE accreditation: None

This eLearning course will describe the ExionLC AE system and how to use it. It covers the following topics:

• System overview
• Device setup
• LC method creation
• Batch creation
• Best practices

After completing the course, you should be able to :

• Configure the devices for use
• Manually control the system using the device control pane and control panel on the system
• Describe appropriate parameter settings to use when creating an LC method
• Create and submit a sample batch for analysis
• Purge and equilibrate the system before use
• Apply best practices when preparing solution and sample plates for use.

Related instruments: ExionLC AE system

Related software: SCIEX OS software

Certificate type: Completion

PACE accreditation: None

This training session will provide an overview of the Jasper HPLC system and how to use the system for sample analysis. 
After taking this course, you should be able to:

• Understand the components of the Jasper HPLC system
• Describe the LC flow path through the LC system
• Acquire data for samples
• Perform system tasks before and after acquisition

Chapters: 1
Certificate Type: Completion
PACE Accreditation: No

• Understand the design of the Lipidyzer Platform
• Have an understanding of the Lipidyzer Workflow
• Know the consumables needed to perform a direct infusion
• Have an understanding of the Lipidomics Workflow Software and its User Interface

Chapters: One (1)
Certificate Type: Completion
PACE Accreditation: No

This course introduces you to the M5 MicroLC system and includes the following topics:

• Overview of the M5 MicroLC system
• System setup
• Method and batch creation
• Best practices and maintenance

After completing the course, you should be able to:

• Describe the components in the M5 MicroLC system
• Explain the steps in a trap and elute workflow
• Activate the LC system
• Create methods for direct injection and trap and elute experiments
• Create a batch for acquisition and equilibrate the system
• Describe best practices for using the system and how to perform basic maintenance tasks

Related instruments: M5 MicroLC system

Related software: Analyst, Analyst TF and SCIEX OS software

Certificate type: Completion

PACE accreditation: None

This course gives you an introduction to the SCIEX ExionLC 2.0 and 2.0+ system and covers its features and benefits. It includes the following topics:

• Overview of the system
• Overview of the different modules

Related instruments: ExionLC 2.0 and 2.0+ systems

Related software: SCIEX OS and Analyst software

Certificate type: Completion

PACE accreditation: None

This course will explain the content covered during the customer familiarization training (CFC) provided by the field service employee (FSE) during installation of your instrument. It will teach you how to use the Echo® MS+ system combined with the SCIEX Triple Quad 6500+ system for a workflow using TOF MS data. It consists of four modules: Safety requirements, System setup, Method creation and Acquisition.

• Safety requirements and System setup explain appropriate laboratory safety procedures, how to configure the system and prepare system solvents and samples.
• Method creation shows you how to create MS and AE methods and optimize the method parameters.
• Acquisition shows you how to acquire data, create a processing method, process and review data, perform automated data processing after acquisition.

If required, you can find example data to use as practice for data processing in the Resources tab.

Related instruments: Echo® MS+ and SCIEX Triple Quad 6500+ system

Related software: SCIEX OS software

Certificate type: Completion

PACE accreditation: None

This course will explain the content covered during the customer familiarization training (CFC) provided by the field service employee (FSE) during installation of your instrument. It will teach you how to use the Echo® MS+ system combined with the ZenoTOF 7600 system for a workflow using TOF MS data. It consists of four modules: Safety requirements, System setup, Method creation and Acquisition.

• Safety requirements and System setup explain appropriate laboratory safety procedures, how to configure the system and prepare system solvents and samples.
• Method creation shows you how to create MS and AE methods and optimize the method parameters.
• Acquisition shows you how to acquire data, create a processing method, process and review data, perform automated data processing after acquisition.

If required, you can find example data to use as practice for data processing in the Resources tab.
Related instruments: Echo® MS+ and ZenoTOF 7600 system

Related software: SCIEX OS software

Certificate type: Completion

PACE accreditation: None

This course covers the theory and application of time-of-flight mass spectrometry and will cover the following topics:

• Time-of-flight theory
• Factors impacting mass resolution in TOF MS and technical measures for improvement
• Definitions of monoisotopic mass, average mass and mass accuracy
• Scan rate and mass stability in TOF MS
• Benefits and applications of TOF instruments

Related instruments: TripleTOF 6600+, TripleTOF 6600, TripleTOF 5600, TripleTOF 5600+, TripleTOF 4600, TripleTOF 4600+, X500R QTOF, X500B QTOF and ZenoTOF 7600 systems

Related software: Analyst TF and SCIEX OS software

Certificate type: Completion

PACE accreditation: None

This course will provide an introduction to triple quadrupole and linear ion trap theory, scans and operation on triple quadrupole and LIT mass spectrometers. After taking this course, you should be able to:

• Describe the features and benefits of triple quadrupole and QTRAP systems
• Describe the process for ionization and ion transfer
• Describe how the different scan types work
• Describe when you might use the different scan types

Related instruments: 3200, 3200MD, 4000, 4500, 4500MD, 5500, 5500+, 6500, 6500+, Citrine, 7500 systems

Related software: Analyst, Analyst MD and SCIEX OS software

Certificate type: Completion

PACE accreditation: Yes

Learners interested in obtaining a PACE certificate and PACE accreditation for taking this course (equal to 0.5 PACE credit) must successfully complete the learning module and a brief online evaluation survey.

SCIEX is approved (or has applied for approval) as a provider of continuing education programs in the clinical laboratory sciences by the ASCLS P.A.C.E. ® Program.

This course will provide an introduction to triple quadrupole and linear ion trap theory, scans and operation on SCIEX mass spectrometers.  Learners interested in obtaining a PACE certificate and PACE accreditation for taking this course (equal to one (1) PACE credit) must successfully complete the learning module and a brief online evaluation survey.

Chapters: 1
Certificate Type: Completion
PACE Accreditation: Yes

Ce cours a pour but d'aider les utilisateurs qui ne sont pas encore familiarisés avec la chromatographie en phase liquide (LC) à comprendre les principes de base essentiels et aborde les sujets suivants :

• Principes de base de la chromatographie en phase liquide
• Principaux composants du système LC
• Choix du type de méthode LC
• Chromatographie en phase inverse (RP)

Instruments associés : ExionLC AE et M5 MicroLC system

Logiciels associés : Analyst, Analyst TF, Analyst MD et SCIEX OS software

Type de certificat: Achèvement

Ce cours vous présente les bases de la quantification par spectrométrie de masse. Il couvre les sujets suivants :

• Pourquoi utiliser la spectrométrie de masse pour la quantification ?
• Comment établir une courbe d'étalonnage ?
• Quels sont les paramètres de qualité auxquels il faut faire attention ? 

Instruments associés : 3200, 3200 MD, 4000, 3500, 4500, 4500 MD, 5500, 5500+, 6500, 6500+, Citrine, 7500, TripleTOF 6600+, TripleTOF 6600, TripleTOF 5600, TripleTOF 5600+, TripleTOF 4600, TripleTOF 4600+, X500R QTOF et ZenoTOF 7600 system 
Logiciels associés : MultiQuant, Analyst, Analyst MD et SCIEX OS software
Type de certification : Fermeture
Type de certificat : Achèvement

Accréditation PACE : Aucune

Ce cours couvre les bases de la spectrométrie de masse pour les nouveaux utilisateurs, y compris ses applications, la formation des ions, les analyseurs de masse et les détecteurs. Après avoir suivi ce cours, vous devriez :

• Pouvoir expliquer pourquoi les spectromètres de masse utilisent la masse moléculaire pour distinguer différentes molécules.
• Identifier les principaux composants d'un spectromètre de masse et décrire leur fonction.
• Savoir indiquer quelles informations sont contenues dans les types de données de spectrométrie de masse.
• Savoir définir les principaux paramètres de la spectrométrie de masse
• Savoir décrire les différences entre les types de spectromètres de masse et leur utilisation idéale
• Savoir décrire les défis qui peuvent survenir en spectrométrie de masse et donner des exemples pour les surmonter.

Instruments associés : 3200, 3200MD, 4000, 4500, 4500MD, 5500, 5500+, 6500, 6500+, Citrine, 7500, TripleTOF 4600+, TripleTOF 5600, TripleTOF 5600+, TripleTOF 6600, TripleTOF 6600+, X500R, X500B and ZenoTOF 7600 systems

Logiciels associés : Analyst, Analyst MD, Analyst TF and SCIEX OS software

Type de certificat : Achèvement

Accréditation PACE : Aucun

本培训课程将对Jasper HPLC系统做出概要介绍，并讲解如何使用该系统进行样品分析。

在学过本课程之后，你将能够：
- 认识Jasper HPLC系统的各单元

- 描述LC系统的流路
- 进行样品数据采集
- 并将能进行采集前的准备和采集后的收尾工作

章节：1
证书类型：结课

This course is designed to guide you through troubleshooting difficulties you have encountered while using your LC-MS system and covers the most common issues that we have seen our customers experience. This course is not an eLearning course and does not provide a certificate of completion. It is provided in a question and answer format to help you find the cause for your current situation. At each stage, it provides instructions on how to test for different causes.

Related instruments: 3200, 3200MD, 4000, 4500, 4500MD, 5500, 5500+, 6500, 6500+, Citrine, 7500 and 7500+ systems

Related software: Analyst, Analyst MD and SCIEX OS software

Certificate type: None

PACE accreditation: None

在线学习系列课程为适用于SCIEX IVD 三重四极杆和QTRAP 的LC-MS/MS操作培训，包含四个单元：实验室安全须知、实验准备、方法优化、数据处理。在完成本系列课程之后，参与者将了解实验室安全规程，以及如何准备系统、流动相和样品，还将能够学会采集数据、浏览数据及使用MultiQuant MD软件生成报告。

单元数：4
证书类型：结课
 

本系列课程主要讲解SCIEX TripleTOF系统的基础操作知识，共包含四个单元：实验室安全须知、实验准备、LC-MS/MS方法和数据处理。
 实验室安全须知和实验准备单元包括适当的实验室安全程序，如何准备系统、流动相和样品。

LC-MS/MS方法单元包括如何调谐和校准SCIEX TripleTOF系统、构建方法和创建/提交样本批次。

数据处理单元详细介绍了如何使用AnalystTF、PeakView和SCIEX OS软件查看TOF MS数据、子离子数据和IDA数据。

课件屏幕左上角的资源文件夹中有可供数据处理操作参考的样本数据。

单元数：4
证书类别： 结课

本课程涵盖了如何使用配备SCIEX OS软件的ZenoTOF 7600、X500R和X500B QTOF系统的基础知识。课程包括四个单元: 安全与实验室要求、流动相和标准品的准备、优化和数据分析。

• 安全和实验室要求以及实验准备单元包括适当的实验室安全步骤、如何准备系统、流动相和样本
• LC -MS/MS单元包括质谱的调整和校准，采集方法的创建，批次的创建和提交
• 数据分析单元演示了如何处理和查看TOF MS和IDA数据

如果需要，可以在左侧的“资源”部分中找到示例数据，作为数据处理的练习;

章节: 4

证书类别: 结课

本在线学习系列课程为适用于SCIEX三重四极杆和QTRAP 的LC-MS/MS操作培训，包含四个单元：实验室安全须知、试验准备、优化与LC-MS/MS方法、数据处理。在完成本系列课程之后，参与者将了解实验室安全规程，以及如何准备系统、流动相和样品，还将能够优化方法、提交批次和使用MultiQuant软件生成结果列表与绘制标准曲线。

单元数：4
证书类型：结课

このコースでは、 SCIEX QTRAP システム テクノロジーを利用した LC-MS ベースの化合物同定スクリーニングについてご紹介します。このコースを修了すると、Acquisition Methodの作成、BatchのSubmit、データ解析、レポートの作成ができるようになります。

このコースでは、以下の内容をご紹介します。：
- LC-MSによる化合物同定スクリーニングのプロセスについて
- LC-MS/MS システムの概要
- IDA(Information Dependent Acquisition) ワークフローの概要 
- 手動およびIDA Method Wizard によるMRM-IDA Acquisition Methodの作成方法
- BatchのSubmit方法、データ解析について、化合物スクリーニングレポートの作成方法

チャプター数：1
コース修了認定証： 有り
P.A.C.E. 認定対象: 対象外

Ce cours est un aperçu des nouvelles technologies et fonctionnalités utilisées dans le système SCIEX Triple Quad 7500 LC-MS/MS - QTRAP Ready. Il couvre les sujets suivants :

• Fonctionnalité QTRAP Ready
• Source d'ions OptiFlow Pro
• Technologie E Lens
• Guide d'ions D Jet
• Les caractéristiques et avantages de la nouvelle technologie

Type de certificat : Achèvement
Accréditation PACE : Aucune

• Création de méthodes d'acquisition de base et avancées telles que l'ionisation programmée, le MRM programmé (sMRM), les périodes multiples et les expériences IDA
• Création d'un lot d'acquisition
• Soumission du lot à la file d'attente
• Démarrage de l'acquisition de données

Chapitres : 1
Type de certificat : Achèvement
Accréditation PACE : Aucune

Cette session de formation à votre rythme se concentre sur les bases de l'utilisation des logiciels Analyst et Analyst MD pour l'optimisation du composé et de la source/gaz pour les systèmes d'instruments triple quadripôle et QTRAP. L'optimisation manuelle du composé et de la source/gaz sera abordée. De plus, l'optimisation automatisée du composé par perfusion et l'optimisation automatisée de la source/gaz par l'analyse par injection de flux seront couvertes à l'aide de la fonction d'optimisation des composés.

Chapitres : 1
Type de certificat : Achèvement
Accréditation PACE : Aucune

Loạt bài trực tuyến này được thiết kế để hướng dẫn người dùng cách sử dụng hệ thống SCIEX ba tứ cực và hệ thống QTRAP (chỉ dành cho hệ thống RUO) cho quy trình công việc định lượng cơ bản. Nó bao gồm bốn mô-đun: Yêu cầu về an toàn và phòng thí nghiệm, Chuẩn bị pha động và chất chuẩn, Tối ưu hóa và thu thập dữ liệu, Phân tích dữ liệu. Các Yêu cầu về an toàn và Ppòng thí nghiệm, Chuẩn bị pha động và chất chuẩn bao gồm các quy trình an toàn thích hợp trong phòng thí nghiệm, cách chuẩn bị hệ thống, pha động và mẫu.

• Tối ưu hóa và thu thập dữ liệu bao gồm tối ưu hóa thông số hợp chất và nguồn để tạo phương pháp thu thập và cách thu thập dữ liệu.
• Phân tích dữ liệu chỉ cho bạn cách tạo phương pháp xử lý, xử lý và xem xét dữ liệu cũng như tạo báo cáo bằng phần mềm MultiQuant hoặc SCIEX OS-MQ.
• Nếu được yêu cầu, bạn có thể tìm dữ liệu ví dụ để thực hành cho quá trình xử lý dữ liệu trong phần Resource ở phía bên trái.

Số chương: 4
Loại chứng chỉ: Hoàn thành
Chứng nhận PACE: Không

Khóa học này bao gồm những kiến thức cơ bản về cách sử dụng Hệ thống QTOF X500R và X500B với phần mềm SCIEX OS và bao gồm bốn mô-đun: Yêu cầu về an toàn và phòng thí nghiệm, Chuẩn bị, Tối ưu hóa và Phân tích dữ liệu. Sau khi hoàn thành loạt bài này, người tham gia sẽ được thông báo về quy trình an toàn thích hợp trong phòng thí nghiệm, cũng như cách chuẩn bị hệ thống, pha động và mẫu. Họ cũng sẽ có thể tinh chỉnh và hiệu chỉnh hệ thống QTOF X-Series, xây dựng phương pháp và tạo / gửi các lô. Phần cuối cùng sẽ bao gồm việc xem xét dữ liệu TOF MS và IDA.

Số chương: 4
Loại chứng chỉ: Hoàn thành
Chứng nhận PACE: Không

Đây là khóa học Làm quen với khách hàng dành cho các máy khối phổ dòng SCIEX 4500, 5500 và 6500. Bạn sẽ được làm quen với tổng quan về phần mềm và phần cứng, cách tinh chỉnh và hiệu chỉnh thiết bị, chạy một lô mẫu và thực hiện bảo trì đơn giản.

Số chương: 5
Loại chứng chỉ: Hoàn thành
Chứng nhận PACE: Không

Mô-đun đào tạo này bao gồm cách làm sạch các thành phần phía trước cho hệ thống khối phổ kế ba tứ cực và QTRAP hãng Sciex.

Các chủ đề sau được đề cập trong suốt khóa học:
- Tổng quan về các thành phần giao diện người dùng
- Các mẹo làm sạch
- Quy trình làm sạch hệ thống đối với các đĩa mành và orifice, các skimmer và dẫn hướng ion.

Click vào nút "Resources" ở bên trái của trang để biết thêm về "Cách mô phỏng van chuyển hướng" và "Thông số nguồn / khí và cài đặt".

Số chương: 1
Loại chứng chỉ: Hoàn thành
Chứng nhận PACE: Không

このコースは、MultiQuant ソフトウェアを使いこなすことを目的としています。この学習モジュールを修了すると、以下のことができるようになります:

• MultiQuantソフトウェアの積分アルゴリズムの選択
• MultiQuant ウィザードを使用したデータの処理・解析とResults Tableの作成
• ピークの確認と積分パラメータの変更
• 検量線、メトリックプロット、統計（Statistics Table）の作成
• Reporterツールを使用したレポートの作成

チャプター数 : 1

コース修了認定証 : 有り

P.A.C.E. 認定対象 : 対象外

This course will show you how to use the OneOmics Suite in the SCIEX Cloud Platform for the ProteinPilot Cloud workflow for proteomics. The topics covered are:

• Overview of the OneOmics Suite in the SCIEX Cloud Platform
• How to use CloudConnect for PeakView software and upload your data files
• How to set up your experimental metadata with Experiment Manager to process your ProteinPilot data
• How to visualize the data using the Analytics and Browser applications

Related instruments: TripleTOF 4600, 4600+, 5600, 5600+, 6600, Z500B, X500R, ZenoTOF 7600 systems

Related software: ProteinPilot, OneOmics, PeakView software

Certificate type: Completion

This course will show you how to perform SWATH quantification for Proteomics using the OneOmics Suite in the SCIEX Cloud Platform. The topics covered are:

• Overview of the OneOmics Suite in the SCIEX Cloud Platform
• How to use CloudConnect for PeakView software and upload your data files
• How to set up your data processing jobs and define the experimental metadata using Experiment Manager
• Data processing using the Extractor and Assembler applications
• How to visualize the data using the Analytics and Browser applications

Related instruments: TripleTOF 4600, 4600+, 5600, 5600+, 6600, Z500B, X500R, ZenoTOF 7600 systems

Related software: OneOmics, PeakView software

Certificate type: Completion

PACE accreditation: None

This course will show you how to process SWATH results for Metabolomics using the OneOmics Suite in the SCIEX Cloud Platform. The topics covered are:

• Overview of the OneOmics Suite in the SCIEX Cloud Platform
• Using CloudConnect for PeakView software
• Setting up your data processing jobs using Experiment Manager
• Data processing using the Extractor and Assembler Applications
• Data visualization using the Analytics and Browser Applications

Related instruments: TripleTOF 4600, 4600+, 5600, 5600+, 6600, Z500B, X500R, ZenoTOF 7600 systems

Related software: OneOmics, PeakView software

Certificate type: Completion

This course will show you how to visualize SWATH results for Proteomics and Metabolomics using the OneOmics Suite in the SCIEX Cloud Platform. The topics covered are:

• Overview of the OneOmics Suite in the SCIEX Cloud Platform
• How to use the MarkerView and Review applications to visualize your results
• Show an example of how to process and visualize a full Multi-Omics data set using the tools in the OneOmics Suite

Related instruments: TripleTOF 4600, 4600+, 5600, 5600+, 6600, Z500B, X500R, ZenoTOF 7600 systems

Related software: OneOmics, PeakView software

Certificate type: Completion

PACE accreditation: None

本课程是 PA 800 Plus系统维护工作的快速系列视频介绍。

卡盒处理系列

• 组装卡盒和拆卸毛细管
• 为UV和PDA检测安装卡盒狭缝和O形环
• 安装LIF狭缝和probe导向组件
• 更换冷却液管路
• 切割毛细管
• 毛细管的储存
• 为UV和PDA检测安装和拆卸卡盒
• 更换 UV 或 PDA 检测器
• 更换 LIF 检测器

 系统维护系列

• 清洗电极、电极保护支架和接口模块
• 拆卸和更换电极和电极保护支架
• 为UV或PDA检测器清洁光纤线
• 添加毛细管卡盒冷却液
• 更换嵌圈
• 更换氘灯

相关仪器：PA 800 Plus 系统

相关软件：32 Karat 软件

证书类型：无

This course explains how data files acquired using the Echo® MS system are split for use during data processing and covers the following topics:

• How data splitting is done
• What file splitting issues indicate
• Different causes of data splitting issues

After completing this course, you should be able to:

• Explain the Echo® MS data file structure
• Describe how a data file is split into individual samples by the software
• Troubleshoot common data splitting issues

Related instruments: Echo® MS system

Related software: SCIEX OS software

Certificate type: Completion

PACE accreditation: None

Khóa học này tập trung vào những kiến thức cơ bản về cách sử dụng phần mềm Analyst và Analyst MD để tối ưu hóa thông số hợp chất và nguồn / khí cho hệ thống thiết bị ba tứ cực và QTRAP. Cách tối ưu hóa thủ công các thông số hợp chất và nguồn / khí sẽ được trình bày. Ngoài ra, tối ưu hóa thông số hợp chất tự động bằng phương pháp phun và tối ưu hóa nguồn / khí tự động bằng phân tích tiêm dòng sẽ được đề cập bằng cách sử dụng chức năng Tối ưu hóa thông số hợp chất.

Số chương: 1
Loại chứng chỉ: Hoàn thành
Chứng nhận PACE: Không

This course goes into detail about the practical aspect of quantitation and includes the following topics:

• Selection of precursor and fragment ions
• Reasons for poor accuracy by loss of the target molecule (matrix effect)
• Use of isotope-labeled standards
• Surrogate matrix
• Injection volume
• Correct pipetting
• Data points per chromatographic peak

After taking this course, you should be able to select the best precursor and fragment ions, identify the factors which can negatively impact the accuracy and know what to consider to get best quantitative results, e.g. the use of isotope-labeled standards.

Related instruments: 3200, 3200 MD, 4000, 3500, 4500, 4500 MD, 5500, 5500+, 6500, 6500+, Citrine, 7500, TripleTOF 6600+, TripleTOF 6600, TripleTOF 5600, TripleTOF 5600+, TripleTOF 4600, TripleTOF 4600+, X500R QTOF and ZenoTOF 7600 systems

Related software: Analyst, Analyst MD, MultiQuant and SCIEX OS software

Certificate type: Completion

PACE accreditation: None

This course focuses on quantitative data processing using the Analytics workspace in SCIEX OS software for all SCIEX instruments (excluding MD instruments). This entire eLearning series consists of 3 modules : Algorithms and flagging, Create method and results, and Review and report results. 

• Understand the different types of integration algorithms and their parameters

• Explain the pre-defined flagging rules for concentration, accuracy, integration and ion ratios

• Create a processing method

• Create results

• Perform data review

• Export and report results

Related instruments: 3000, 3200, 3500, 4000, 4500, 5500, 5500+, 6500, 6500+, 7500, 7500+, 4600, 4600+, 5600, 6600, 6600+, X500R, X500B, ZenoTOF 7600 and 7600+ systems

Related software: SCIEX OS software

Certificate type: Completion

PACE accreditation: None

This series of short maintenance videos focuses on the ExionLC AE, Shimadzu LC-40 and LC-40 CL systems and cover how to perform simple instrument maintenance tasks. The tasks in the videos may be demonstrated using a different model, but the procedures are the same for all applicable systems listed. 

Pumps

• Pump head disassembly
• Pump head and check valve cleaning
• High pressure seal replacement
• Plunger and diaphragm replacement
• Pump head installation
• Inline filter replacement
• Suction filter replacement

Autosampler

• Adjusting the needle position for different plate types
• High pressure valve removal
• High pressure valve rotor and stator replacement
• High pressure valve installation
• Low pressure valve removal
• Low pressure valve rotor and stator replacement
• Measuring pump plunger and seal replacement
• Needle seal replacement
• Needle replacement
• Injection port adjustment
• Resetting the usage counters

Plate changer

• Cleaning the plater changer air inlet filter

Detectors

• Rebuilding the flow cell

Related instruments: ExionLC AE, Shimadzu LC-40 and LC-40 CL systems

Related software: Analyst and SCIEX OS software

Certificate type: None

PACE accreditation: None

This series of short maintenance videos focuses on the SCIEX X500 and ZenoTOF 7600 systems and will cover how to perform simple instrument maintenance tasks.

• Perform system shutdown
• Perform system startup
• Replace the twin electrodes
• Perform front end cleaning of the mass spectrometer
• Refill and replace the CDS bottles

Related instruments: X500R, X500B and ZenoTOF 7600 systems

Related software: SCIEX OS software

Certificate type: None

PACE accreditation: None

This series of quick maintenance videos covers the SCIEX triple quadrupole and QTRAP systems. You will become familiar with performing simple maintenance tasks for your system.

Ion source maintenance videos

• Removing and installing the ion source
• Removing and installing the probe
• Removing ion source covers
• Replacing the metal turbo heater on the Turbo V ion source with external covers
• Replacing the turbo heater on the IonDrive Turbo V ion source with external covers

Related instruments: 3200, 3200MD, 3500, 4000, 4500, 4500MD, 5500, 5500+, 6500, 6500+, Citrine systems

Related software: Analyst and Analyst MD software

Certificate type: None

PACE accreditation: None

This series of short maintenance videos focuses on the BioPhase 8800 system and cover how to perform simple instrument maintenance tasks.

• Install, eject and store the cartridge
• Load the reagent and sample plates
• Install the UV filters
• Install the LIF filters
• Clean the sample lid
• Install the UV lamp
• Add capillary cartridge coolant

Related instruments: BioPhase 8800 system

Related software: BioPhase software

Certificate type: None

PACE accreditation: None

This series of short maintenance videos focuses on the ExionLC 2.0 system, and cover how to perform simple instrument maintenance tasks.

ExionLC 2.0 and 2.0+ Autosampler

• Rack positioning and syringe care
• Flushing the autosampler
• Replacing the sample needle
• Replacing the air needle
• Replacing the syringe
• Replacing the fuses

ExionLC 2.0 Binary Pump

• Removing and installing the pump head
• Dissembling and reassembling the pump head
• Replacing the o-rings
• Replacing the pump seals
• Purging the pump
• Replacing the check valves
• Replacing the mixer
• Replacing the filter cartridge

ExionLC 2.0+ Binary Pump

• Replacing the check valves
• Replacing the mixer
• Replacing the stator and rotor seal
• Replacing the filter cartridge

ExionLC 2.0 Detectors

• Replacing the flow cell

Related instruments: ExionLC 2.0 and 2.0+ system

Related software: Analyst and SCIEX OS software

Certificate type: None

PACE accreditation: None

This series of short maintenance videos focuses on the M5 MicroLC system, and cover how to perform simple instrument maintenance tasks.

• Putting PAL Virtual Terminal into Extended User Mode
• Replace the valve stator and rotor seal
• Replace the sample loop
• Prime the autosampler wash pumps
• Replace the syringe needle
• Replace the syringe barrel and plunger
• Measure the flow rate
• Calibrate the flow meters
• Re-initialize pressure transducers

Related instruments: M5 MicroLC system

Related software: Analyst, Analyst TF and SCIEX OS software

Certificate type: None

PACE accreditation: None

This series of short maintenance videos focuses on the PA 800 Plus system and cover how to perform simple instrument maintenance tasks.

Cartridge handling

• Cartridge rebuild and capillary removal
• Installing the cartridge aperture and O-ring for UV and PDS detection
• Installing the LIF aperture and probe guide
• Changing coolant tubing
• Trimming a capillary
• Capillary storage
• Installing and removing the capillary cartridge for UV or PDA detection
• Changing a UV or PDA detector
• Changing the LIF detector

System maintenance

• Cleaning the electrodes, insertion levers and interface block
• Removing and replacing the insertion levers and electrodes
• Cleaning the fiber-optic cable connectors for UV or PDA detectors
• Adding capillary cartridge coolant
• Replacing quad rings
• Changing the deuterium lamp

Related instruments: PA 800 Plus system

Related software: 32 Karat software

Certificate type: None

PACE accreditation: None

该课程是对 SCIEX 7500 系统的新技术和功能的概述。包含以下内容：

• QTRAP Ready 功能
• OptiFlow Pro 离子源
• E Lens 技术
• D Jet 离子导向组件

相关仪器: 7500 系统

相关软件：SCIEX OS 软件

证书类型：结课证书

This course is an introduction to the SCIEX Empower Driver that is used on SCIEX CE instrumentation. The Empower driver is a software interface that gives users direct control of their PA 800 Plus Pharmaceutical Analysis System in the Empower 3 Chromatography Data System or CDS.

This course will cover the following topics:

• Overview of the SCIEX Empower Driver
• Features and new updates of the Empower Driver related to detectors, creating methods and data processing
• Video demonstration of using the features of the Empower Driver

このコースでは、基本的な定量ワークフローにおける SCIEX IVD トリプル四重極および QTRAP システムの操作方法を学びます。「安全性およびラボの要件」、「準備」、「LC-MS/MS」、「データ解析」の 4 つのモジュールで構成されています。

• 「安全性およびラボの要件」、「準備」では、適切なラボの安全手順、システム、移動相、サンプルの準備方法についてご説明します。
• 「LC-MS/MS」では、化合物およびイオンソースの最適化によるAcquisition Methodの作成、およびデータの取得方法についてご説明します。
• 「データ解析」では、Processing Methodの作成、データの処理・解析とレビュー、MultiQuant MD ソフトウェアを使用したレポートの作成方法について詳しくご説明します。

「Resources」に、データ処理・解析の練習用のデータ例を掲載しています。必要に応じて、ご利用ください。

チャプター数 : 4
コース修了認定証 : 有り
P.A.C.E. 認定対象 : 対象外

Dieser Kurs beschreibt das Quellenabsaugsystem für Ihr Massenspektrometer und behandelt die folgenden Themen:

• Was ist das Quellenabsaugsystem und wie funktioniert es?
• Häufige Symptome und Ursachen für Ausfall des Quellenabsaugsystems
• Fehlersuche und Wartung für die Quellenabsaugung

Nach diesem Kurs sollten Sie wissen, wie man die Komponenten der Absauganlage identifiziert, und in der Lage sein, Probleme mit der Absauganlage zu beheben.

Zugehörige Instrumente: 3200, 3200MD, 4000, 4500, 4500MD, 5500, 5500+, 6500, 6500+, Citrine, 7500, TripleTOF 6600+, TripleTOF 6600, TripleTOF 5600, TripleTOF 5600+, TripleTOF 4600, TripleTOF 4600+, X500R, X500B and ZenoTOF 7600 systems

Zugehörige Software: Analyst, Analyst MD, Analyst TF und SCIEX OS software

Zertifizierungsart: Abschluß

This course describes the source exhaust system for your mass spectrometer and covers the following topics:

• What is the source exhaust and how does it work?
• Common symptoms pf source exhaust failure and causes
• Troubleshooting and maintenance for the source exhaust

After taking this course, you should know how to identify components of the source exhaust and be able to troubleshoot issues with the source exhaust system.

Related instruments: 3200, 3200MD, 4000, 4500, 4500MD, 5500, 5500+, 6500, 6500+, Citrine, 7500, 7500+, TripleTOF 6600+, TripleTOF 6600, TripleTOF 5600, TripleTOF 5600+, TripleTOF 4600, TripleTOF 4600+, X500R, X500B and ZenoTOF 7600 systems

Related software: Analyst, Analyst MD, Analyst TF and SCIEX OS software

Certificate type: Completion

PACE accreditation: Yes

This course covers how to use the MS Tune workspace in SCIEX OS software for SCIEX Triple Quad and QTRAP systems. In this course, we will review the following topics:

• Configuring devices in SCIEX OS software
• Tuning solutions
• The Tuning instrument data file
• How to verify and tune your SCIEX system performance using SCIEX OS software
  • Verify instrument performance
  • Tune and calibrate
  • Positive detector optimization

Related instruments: 4500, 5500, 5500+, 6500, 6500+, 7500 systems

Related software: SCIEX OS software

Certificate type: Completion

PACE accreditation: None

This course covers how to use the MS Tune workspace in SCIEX OS software for the ZenoTOF 7600 system and covers the following topics:

• General tuning information such as frequency of tuning, tuning solutions to use and best practices
• Verifying the instrument performance using the Quick Status Check
• Resources for troubleshooting the Quick Status Check and auto run calibration

Related instruments: ZenoTOF 7600 system

Related software: SCIEX OS software

Certificate type: Completion

PACE accreditation: None

This course introduces you to compound and source optimization using SCIEX OS software and covers the following topics:

• Manual compound optimization
• Automated compound optimization
• Manual source optimization
• Automated source optimization
• Automated MS³ optimization

Related instruments: 4500, 5500, 5500+, 6500, 6500+, 7500 systems

Related software: SCIEX OS software

Certificate type: Completion

PACE accreditation: None

This course covers how to create LC and MS methods for SCIEX Triple Quad and QTRAP systems using SCIEX OS software. It includes the following topics:

• MS method workspace overview
• MS method experiment parameters
• Scheduling MS methods
• Creating LC methods

After taking this course, you should be able to:

• Create an MS method containing triple quadrupole or linear ion trap experiments
• Describe the different parameters for each MS experiment type
• Schedule MRM transitions in a method to acquire data at set time points
• Explain how multiple experiments can be included in a method and scheduled
• Convert an Analyst software method to a SCIEX OS software method
• Create an LC method and program the mass spectrometer diverter valve

Related instruments: 4500, 5500, 5500+, 6500, 6500+, 7500 series systems

Related software: SCIEX OS software

Certificate type: Completion

PACE accreditation: None

This introductory eLearning course will give you an overview of the functionality in SCIEX OS software.

The following topics are covered during the course:

• Workspaces in the dashboard
• Shortcuts in the top ribbon

Related instruments: 4500, 5500, 5500+, 6500, 6500+, 7500, 7500+, 4600, 5600, 6600, 6600+, X500R, X500B, ZenoTOF 7600 and 7600+ systems

Related software: SCIEX OS software

Certificate type: Completion

PACE accreditation: None

この e ラーニング コースは、SCIEX OS ソフトウェアの Analytics ワークスペースにおける[Non-targeted screening]ワークフローを使用したデータの処理・解析に焦点を当てています。これは、すべての SCIEX 装置 (MD 装置を除く) に適用されます。

• ［Non-targeted screening］ワークフローを説明する
• データレビューにおけるライブラリー検索および組成解析（Formula Finder）の利用方法を理解する
• Processing Methodの作成
• Results Tableの作成
• データレビューの実行
• データのエクスポートとレポートの作成

チャプター数 : 1
コース修了認定証 : 有り
P.A.C.E. 認定対象 : 対象外

このコースでは、SCIEX OS ソフトウェアの [Quantitation and targeted identification] ワークフローを使用した定性データの処理・解析についてご説明します。このコースは、すべての SCIEX 装置 (MD 装置を除く) に適用されます。

• [Quantitation and targeted identification]ワークフローの説明
• ライブラリー検索の種類を理解する
• Processing Methodの作成
• Results Tableの作成
• [Results Table]や[Peak Review]ペインを使ったデータレビューの実行
• 結果のエクスポートとレポート

チャプター数 : 1
コース修了認定証 : 有り
P.A.C.E. 認定対象 : 対象外

この e ラーニング シリーズは、すべてのSCIEX 装置（MD 装置を除く）のデータを処理できる SCIEX OS ソフトウェアの Analytics ワークスペースによる、定量データの処理・解析に焦点を当てています。この e ラーニング シリーズ全体は、3 つのモジュールで構成されています。アルゴリズムとフラグ設定ルール、Processing MethodやResults Tableの作成、Results Tableのレビューとレポート作成です。

• さまざまな種類の積分アルゴリズムとそのパラメータを理解する
• 濃度、真度、積分、イオン比に対して事前定義したフラグ設定ルールの説明
• Processing Methodの作成
• Results Tableの作成
• データのレビュー
• 結果のエクスポートとレポート

チャプター数 : 3
コース修了認定証 : 有り
P.A.C.E. 認定対象 : 対象外

このコースでは、SCIEX OSの機能に関する概要について説明します。

• SCIEX OS を円滑に操作する
• SCIEX OS の各ワークスペースの主な機能を理解する
• 各ワークスペースで基本的なタスクを実行する

チャプター数 : 1
コース修了認定証 : 有り
P.A.C.E. 認定対象 : 対象外

本课程介绍如何在ZenoTOF 7600 系统中使用SCIEX OS 软件中的MS Tune 工作空间。包含以下内容：

• 常用调谐信息：调谐频率、调谐液和推荐操
• 使用快速状态检查(Quick Status Check)验证仪器性能
• 快速状态检查和自动校准的资源

相关仪器：ZenoTOF 7600

相关软件：SCIEX OS 软件

证书类型：结课

本课程从以下方面介绍使用SCIEX OS软件的化合物和离子源参数优化：

• 化合物参数的手动优化
• 化合物参数的自动优化
• 离子源参数的手动优化
• 离子源参数的自动优化
• 自动MS³ 参数优化

相关仪器：4500、5500、5500+、6500、6500+、7500 系统

相关软件：SCIEX OS 软件

证书类型：结课

本在线课程是SCIEX OS软件的功能介绍培训。

通过对本课程的学习能够掌握到：

• SCIEX OS，进入目的功能
• SCIEX OS 中每个模块的主要功能
• 能够在每个工作模块中完成基本任务

单元数： 1
证书类型： 结课

このコースは、SCIEX OS ソフトウェアによるZenoTOF 7600、X500R、X500B QTOF システムの基本的な操作方法について解説しています。次の4つのモジュールから構成されています。：「安全性とラボの要件」、「準備（移動相と標準物質の調製）」、「LC-MS/MS」、および「データ解析」。

• 「安全性とラボの要件」、「準備（移動相と標準物質の調製）」では、ラボの適切な安全手順、システム、移動相、試料の準備方法についてご説明します。
• 「LC-MS/MS」では、質量分析装置のチューニングとキャリブレーション、LC および MS Methodの作成、Batchの作成とSubmitについてご説明します。
• 「データ解析」では、TOF MSおよびIDAデータの処理方法とレビューについてご説明します。

必要に応じて、左側のResourcesセクションに掲載した、データ処理の練習用として使用できるデータの一例をご活用ください；

チャプター数 : （4）

コース修了認定証 : 有り

This course is an overview of the new technology and features used in the SCIEX Triple Quad 7500 LC-MS/MS System – QTRAP Ready. It covers the following topics:

• QTRAP Ready Functionality
• OptiFlow Pro Ion Source
• E Lens Technology
• D Jet Ion Guide
• The features and benefits of the new technology

Certificate Type: Completion
PACE Accreditation: None

This course is an overview of the new technology and features used in the SCIEX Triple Quad 7500 LC-MS/MS System – QTRAP Ready. It covers the following topics:

• QTRAP Ready Functionality
• OptiFlow Pro Ion Source
• E Lens Technology
• D Jet Ion Guide
• The features and benefits of the new technology

Certificate Type: Completion
 PACE Accreditation: None

This presentation discusses all the instrument innovations that contribute to the speed, sensitivity, resolution, mass accuracy and robustness of the instrument. It also provides an overview of the Analyst TF software and the different companion software packages used to process data, depending on workflow.

Related instruments: TripleTOF 5600 system

Related software: Analyst TF software

Certificate type: None

PACE accreditation: None

このコースではお使いのTripleTOFシステムのフロントエンドクリーニング方法を学んでいただけます。次の手順をご紹介します。

• 装置の真空解除無しでのカーテンプレート、オリフィスプレートのクリーニング
• 装置の真空解除をともなうQJetイオンガイド、カーテンプレート、オリフィスプレートのクリーニング

チャプター数 : 1
コース修了認定証 : 有り
P.A.C.E. 認定対象 : 対象外

このコースでは 、SCIEX TripleTOF システムの基本的な操作方法を学びます。「安全性およびラボの要件」、「準備」、「LC-MS/MS測定」、「データのレビュー」の 4 つのモジュールから構成されています。

• 「安全性およびラボの要件」および「準備」では、適切なラボの安全手順、システム、移動相、およびサンプルの準備方法をご紹介します。
• 「LC-MS/MS測定」では、SCIEX TripleTOFシステムのTune＆Calibration、Methodの構築、Batchの作成とSubmitの方法についてご説明します。
• 「データのレビュー」では、Analyst TF、PeakView および SCIEX OS ソフトウェアを使用して、TOF MS、Product Ionおよび IDA データをレビューする方法について詳しくご説明します。

「Resources」に、データ処理・解析の練習用データを掲載しています。必要に応じて、ご利用ください。

チャプター数 : 4
コース修了認定証 : 有り
P.A.C.E. 認定対象 : 対象外

本课程将介绍如何清洁TripleTOF系统的前端部件。包括以下内容:

• 不需要卸真空的curtain 、orifice plate日常清洗 
• 需要系统泄真空的包含QJet离子导入组件、curtain 、orifice plate的全面清洗

章节数：1
证书类型: 结课

このコースでは、インタクトタンパク質の分子量測定に関するワークフロー、ペプチドマッピングと定量、宿主細胞由来タンパク質検出のためのMS/MS ALLワークフロー、そしてTripleTOFシステムを用いた更なる分離手法としてのCESIの活用についてご紹介します。

チャプター数 : 1

コース修了認定証 : 有り

P.A.C.E. 認定対象 : 対象外

このメンテナンス方法ビデオはSCIEX X500 QTOF システムのシンプルな装置メンテナンス方法をご紹介します。

このコースを修了すると次のことができるようになります。

• システムの立ち上げとシャットダウン

• ツインエレクトロ―ドの交換

• フロントエンドクリーニングの実施

• CDS溶液ボトルの補充または交換

チャプター数 : 5

コース修了認定証 : 対象外

P.A.C.E. 認定対象 : 対象外

本课程由一系列SCIEX X500 和 ZenoTOF 7600 系统的短小维护视频组成，展示如何进行简单的仪器维护。完成学习之后，学习者将能够：

• 进行系统关机
• 进行系统开机
• 更换双喷针
• 进行质谱的前端清洗
• 补充和更换CDS瓶

章节数：5

证书类别：无

このコースでは、X500R QTOF システムと SCIEX OS を使用した[Non-targeted screening]ワークフローをご紹介します。これは、アドバンスなワークフローのコースです。このコースを受講する前に、X500R QTOFシステムに関する[Introduction to LC-MS/MS]のeラーニングコースを修了されることをお勧めします。このコースを修了すると、スクリーニングワークフロー用の LC および MS Methodの作成、データの取得、Analytics を使用した取得データの処理・解析ができるようになります。

• LCおよびMS Methodの作成
• Batchの作成とデータの取得
• Analyticsの[Non-targeted screening]ワークフローを使ったデータの処理・解析

チャプター数 : 1
コース修了認定証 : 有り
P.A.C.E. 認定対象 : 対象外

このコースでは、X500R QTOF システムと SCIEX OS を使用したHigh-Resolution MRM（MRMHR）ワークフローをご紹介します。これは、アドバンスなワークフローのコースです。このコースを受講する前に、X500R QTOFシステムに関するLC-MS/MS Operation Seriesの eラーニング コースを修了されることをお勧めします。このコースを修了すると、最適な MS Methodを作成し、BatchをSubmitしてデータを処理・解析できるようになります。

• Guided MRM HRによる化合物の最適化
• TOF MSMSの Method編集
• Batchを作成し、scheduled MRM HR Methodを実行
• [Quantitation]、 [Quantitation and targeted identification]ワークフローによるデータの処理・解析

チャプター数 : 1
コース修了認定証 : 有り
P.A.C.E. 認定対象 : 対象外

このコースでは、X500R QTOF システムを使用したSWATH Acquisition による[Quantitation and targeted identification]ワークフローについてご説明します。これは、アドバンスなコースであり、このモジュールを開始する前にX500R QTOFシステムに関する[Introduction to LC-MS/MS]コースを修了することをお勧めします。このコースを修了すると、SWATH AcquisitionのLC および MS Methodの作成、データの取得および処理・解析ができるようになります。

• SWATH Acquisitionとは？
• SCIEX OS での LC Methodの作成
• SWATH Variable Window Calculatorの使用と SCIEX OS での MS Methodの作成
• SWATH Dataの取得
• Analytics を使用した TOF-MS および TOF-MS/MS データの処理・解析

チャプター数 : 1
コース修了認定証 : 有り
P.A.C.E. 認定対象 : 対象外