Rehydrate our drinking water quality
Monitoring drinking water quality for thousands of chemicals in a single analysis
Clean drinking water is essential for life, but our water quality is threatened by 1,000s of chemical contaminants, from everyday products that can seep into drinking water supplies, to runoff and ground water discharge.
Drinking water quality testing is fundamental to protecting our drinking water supplies and ensuring safety. SCIEX supports these efforts by offering sensitive and accurate LC/MS/MS systems for efficient water quality testing for a vast range of drinking water contaminants – monitored from source to consumer.
Drinking water tests typically require extensive sample preparation to achieve the ultra-low detection limits required by regulations. SCIEX LC/MS/MS solutions for drinking water quality testing provides labs with:
- Simplified workflows for direct injection of water samples for analysis – little sample preparation required
- Enhanced sensitivity for reliable detection of trace chemical levels in samples
- Flexibility to screen for both targeted and non-targeted contaminants at once
- Diversity to analyze for many compound classes, including pesticides, herbicides, pharmaceuticals, organic chlorine compounds, industrial chemicals, complexing agents, and even unknown degradants or chemical by-products, in a single injection
Highly sensitive drinking water testing
Additional resources:
- Two Nontargeted Screening Approaches for Examination of Drinking Water Before and After Treatment
- Quantitative Polarity Switching LC-MS/MS Method for Pesticides and PPCPs in Environmental Water Samples
- Screening and Identification of Unknown Contaminants in Untreated Tap Water Using a Hybrid Triple Quadrupole Linear Ion Trap LC-MS/MS System
- EPA Method 535: Detection of Degradates of Chloroacetanilides and other Acetamide Herbicides in Water by LC/MS/MS