The SCIEX clinical diagnostic portfolio is For In Vitro Diagnostic Use. Rx Only. Product(s) not available in all countries. For information on availability, please contact your local sales representative or refer to https://sciex.com/diagnostics. All other products are For Research Use Only. Not for use in Diagnostic Procedures.
Trademarks and/or registered trademarks mentioned herein are the property of AB Sciex Pte. Ltd. or their respective owners in the United States and/or certain other countries.
© 2020 DH Tech. Dev. Pte. Ltd.
Knowledge Base is your tool to finding answers about common questions. Browse all Knowledge Base articles below.
The software package, PeakView® 2.2, CloudConnect 1.2 beta and SWATH® 2.0.1 software. is needed to perform the OneOmics workflow and/or SWATH protein data processing and is Windows 7 and Windows 10, 64-bit compatible.
SCIEX OS software performs best when 20 GB of free space is available on the C drive (C:). Furthermore, SCIEX OS software creates log files in order to monitor both instrument (on an acquisition PC) and software (on both acquisition and processing PC's) performance. These log files incremently increase and can accumulate to a total size of 35 GB. This sets a limit of 55 GB of space needed on the C drive to use SCIEX OS software optimally.
This article contains a step-by-step guide for converting a MultiQuant™ 3.0.3 software quantitation method (.qmethod) file to a Sciex OS 1.5 software quantitation method file (.qmethod).
Yes , Skyline version 4.2.1 can process .wiff2 files generated using SCIEX OS software.
Even after resetting the mass spectrometer (by following the power-cycling procedure), the instrument would not come back online after a power failure. On some occasions, the mass spectrometer must be completely powered down for at least 1 min in order for the circuits to discharge and fully release any faulty information.
Sample acquisition using Sciex OS 1.5 software was stopped, resulting in a system error. The drive where the SCIEX OS Data folder was stored was full, so backing up and clearing out older data allowed for data acquisition to proceed.
To add users to SCIEX OS software Security Database, the user who installed the software needs to navigate to the User Management section in the Configuration mode and select the plus sign next to the User name or group drop-down menu.
In Analyst® software, there are three security configuration modes available: Single User, Integrated and Mixed. Are there functional equivalents of all three available in SCIEX OS software? In short, no, there are not.
To filter library hit results in a SCIEX OS software by library score and to remove any results without a proper score (presenting with N/A), a custom filter can be used in the Analytics mode.
To enter the formula for a stable-isotope-labeled compound in the Components tab of a processing method in SCIEX OS software, some specific rules must be followed. When entering the formula, the atomic mass of the isotope is added before the single letter chemical abbreviation of the element, and then the total number of atoms of each isotope follows the chemical symbol.
A new password has been sent to your email.
You have added a user.
Unfortunately the serial number you provided shows as inactive in our database. Would you like to submit the case anyway?
This serial number could not be found. Would you like to submit the case anyway?
Your password has been updated.
Your account is now created.
A verification link has been sent to your email.
A new password has been sent to your email.
Your insturment has been removed.
Your privacy settings are now updated.
Unfortunately the serial number you provided shows as inactive in our database. Please open a support case here if you require more assistance.
Software has already been registered to another instrument. Please check your AID and try again.
If you want to change the License Key to another instrument, please submit a new case.
Software has already been registered to the instrument selected.
Please check your instrument's software by going to the Instruments page and selecting the instrument in your "My Instruments" section. Here you will see a Software tab where you can view your instrument's software information.
You can also go to the Registered Software page to view software associated with your instrument(s).
If you are not finding what you are looking for, please submit a new case.