The SCIEX clinical diagnostic portfolio is For In Vitro Diagnostic Use. Rx Only. Product(s) not available in all countries. For information on availability, please contact your local sales representative or refer to https://sciex.com/diagnostics. All other products are For Research Use Only. Not for use in Diagnostic Procedures.
Trademarks and/or registered trademarks mentioned herein, including associated logos, are the property of AB Sciex Pte. Ltd. or their respective owners in the United States and/or certain other countries.
© 2020 DH Tech. Dev. Pte. Ltd.
Knowledge Base is your tool to finding answers about common questions. Browse all Knowledge Base articles below.
After upgrading Analyst® software, some data files now include xx.wiff.scan files. In the Configure mode in Analyst software, navigate to the Tools and Queue Options menu. Deselect the Use flat files for scan data button to prevent the xx.wiff.scan files from being created.
To obtain access to the software download for StatusScope® Remote Monitoring service, users who are under warranty or who have purchased the service can navigate to statusscope.absciex.com and select the link to the software download.
When setting up MPX 2.0 software's carryover detection feature in the Define limit values screen (step 3), the low limit for each component must be defined using the lower limit of quantitation (LLOQ) or from the cut-off limit determined from the standard curve.
BPV Flex can only open the first period of multiple period experiment runs.
When installing Analyst® software with the Waters' Driver Pack 4 (DP4) or the Driver Pack 4 supplemental release (DP4 SR1), consideration must be given to the Analyst security mode setting that is selected.
When trying to access the Analytics mode in SCIEX OS software when logged into Windows as a user without administrative privileges, an error is received: "Error has occurred: Cannot open LibraryViewServiceHost service on computer '.'. LibraryView service must be running." The LibraryViewServiceHost was not started when the Analytics mode was opened, and a workaround needs to be used to launch it.
MPX™ 2.0 software contains a feature for automated carryover monitoring, which can identify samples above a certain threshold.
SCIEX OS software creates a special placeholder file (with a file extension of .special) and places these files in the root of every known SCIEX OS project sub-folder. SCIEX OS software uses both the project folder names and the .special files to identify its known folders, and it will not recognize the folder if the .special files are removed.
Data processing for intact proteins and peptide mapping in BioPharmaView™ software versions higher than 2.x do not allow for multiple period experiments.
To eliminate the possibility of any IP address conflict, the Waters IP addresses should be changed when operating with a SCIEX 5500/6500+ series instrument. To change the IP address on a Waters' LC components, use the Waters DHCP configurator located in the following folder: C:\\Program Files\Waters Instruments\Waters DHCP Server Configuration.exe.
A new password has been sent to your email.
You have added a user.
Unfortunately the serial number you provided shows as inactive in our database. Would you like to submit the case anyway?
This serial number could not be found. Would you like to submit the case anyway?
Your password has been updated.
Your account is now created.
A verification link has been sent to your email.
A new password has been sent to your email.
Your insturment has been removed.
Your privacy settings are now updated.
Unfortunately the serial number you provided shows as inactive in our database. Please open a support case here if you require more assistance.
Software has already been registered to another instrument. Please check your AID and try again.
If you want to change the License Key to another instrument, please submit a new case.
Software has already been registered to the instrument selected.
Please check your instrument's software by going to the Instruments page and selecting the instrument in your "My Instruments" section. Here you will see a Software tab where you can view your instrument's software information.
You can also go to the Registered Software page to view software associated with your instrument(s).
If you are not finding what you are looking for, please submit a new case.